Operation Manual, User's Manual
2-86
COPIER►OTHER FUNCTIONS
Tracking Information Print Makes a stamp copy under a tracking information print.
Repeat Layout Cannot be combined.
Position Image Prints an image at the original position regardless of the Position Image setting.
• An image must be registered in advance from the printer driver to the machine.
► REGISTERING A CUSTOM IMAGE (page 3-49)
•
A custom stamp image is copied by sheet, not by original. If N-Up is enabled, user stamps are copied for each set of pages.
• A custom stamp image is copied with the registered size. The size remains unchanged even when the copy ratio is
enlarged or reduced.
• A different custom image cannot be specified for each page.
• If an image runs off of the specified paper depending on the registered size or position, the excess will not be copied.
• Register a Custom Image
In "Settings (administrator)", select [System Settings] → [Copy Settings] → [Condition Settings] → [Text /Image Printing]
→ [Custom Stamp] or [Custom Watermark].
• Disabling Registration of Custom Image
In "Settings (administrator)", select [System Settings] → [Common Settings] → [Enable/Disable Settings] → [Disabling
Registration of Custom Image] and configure the setting.
1
Place the original.
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
► AUTOMATIC DOCUMENT FEEDER (page 1-107)
► DOCUMENT GLASS (page 1-109)
2
Tap the [Others] key, and tap the [Custom Image] key.
3
Tap the [Custom Stamp] or [Custom Watermark] key.
4
Tap the [Image] key to select an image.
Select the required thumbnail image(s) from the available selection.
Combined function Custom image operations