Operation Manual, User's Manual
Table Of Contents
![](/manual/sharp/21sfx10ub/3-2-1-operation-manual-user-s-manual-english/images/img-128.png)
1-125
BEFORE USING THE MACHINEâ–ºPERIPHERAL DEVICES
SUPPLIES
The finisher requires the following staple cartridge:
Staple cartridge (approx. 5000 staples per cartridge x three cartridges)
MX-SCX1
INNER FINISHER MAINTENANCE
When the staple cartridge runs out of staples, a message will appear in the operation panel. Follow the operation
procedure to replace the staple cartridge.
Replacement the staple cartridge
1
Open the finisher front cover.
2
Lower the staple case release lever
and remove the staple case.
Pull the staple case out to the right.
3
Remove the empty staple cartridge
from the staple case.