Operation Manual, User's Manual

7-14
SETTING MODE►SETTING MODE LIST
Image Send Settings
Common Settings
U: General user; A: System administrator/Administrator
Setup Items
Factory default setting
U A Page
O Common Settings
Condition Settings
Hold settings for a while after scanning has been
completed
Disabled
No Yes
4-11
Job Auto Start Time During Scanning 60sec. No Yes
Default Display Setting E-mail (Fax when the
facsimile expansion kit
is installed)
No Yes
Address Book Default Selection No Yes
4-12
Higher priority is given to the display of address book.
Disabled No Yes
Apply Addresses of Sending Modes Only Enabled No Yes
Category Displayed as Default None No Yes
A
Display all address type regardless of the mode
being displayed currently.
Disabled
No Yes
Enlarge Address Book Enabled No Yes
Image Orientation Portrait No Yes 4-44
Preview Setting
Received Data Image Check Setting Disabled No Yes 4-61
Default List/Thumbnail Display No Yes
1-17
Fax/I-Fax Reception Data*
1, *2
Thumbnail No Yes
Default Exposure Settings Auto No Yes 4-53
Default Original Image Type Text No Yes 5-57
Sending the same image sent in Fax mode*
1
Disabled No Yes 4-40
Be sure to press Next Address Key ([+]) before
selecting the next address.
Disabled
No Yes 4-39
Disable Switching of Display Order Disabled No Yes A
Hold Setting for Received Data Print Disabled No Yes
4-61- Password No Yes
- Change Password No Yes
Default Verification Stamp
*3
No Yes
4-11
5-11
E-mail/Scan/Data Entry Disabled No Yes
Fax/Internet Fax
*1, *2
Disabled No Yes