User Manual

36
(CH SETTING mode)
(CH SETTING mode)
(CH SEARCH mode)
AI /CABLER
EZ
SETUP
CH SEARCH
CH MEMORY
2
AR +T:
TO –P:
AIR
CH SEARCH
ST
S
1
AI /CABLER
EZ
SETUP
CH SEARCH
CH MEMORY
L Saving broadcast TV channels into memory.
1.1 Press
MENU to access the MAIN MENU
screen, then press
CH UP ( 8 ) or DOWN
(
9 ) to move the “ ” mark to “SET UP”.
1.2 Press
VOL (+) or (–) to access SET UP
mode, then press CH UP ( 8 ) or DOWN
(
9 ) to move the “ ” mark to “CH
SETTING”.
1.3 Press
VOL (+) or (–) to access CH
SETTING screen.
1.4 Press
CH UP ( 8 ) or DOWN ( 9 ) to move
the “
” mark to “CH SEARCH”, then
press
VOL (+) or (–) to access CH
SEARCH screen.
START
2.1 Press
VOL (+) . The tuner will search
through all available channels in your
area and add them into the TV’s memory.
STOP
2.2 Press
VOL (–) . CH SEARCH will stop at
the current channel and will not add any
higher channels.
2.3 Press
MENU to exit.
Note:
• If you press VOL (+) again while in the CH SEARCH mode, auto-
program will start again, and the previously memorized channels will
be lost.
L Adding weak or additional channels or erasing unwanted channels from TV memory.
1.1 Press
MENU to access MAIN MENU
screen, then press CH UP ( 8 ) or DOWN
(
9 ) to move the “ ” mark to “SET UP”.
1.2 Press
VOL (+) or (–) to access SET UP
mode, then press
CH UP ( 8 ) or DOWN
(
9 ) to move the “ ” mark to “CH
SETTING”.
1.3 Press
VOL (+) or (–) to access CH
SETTING mode, then press
CH UP ( 8 )
or DOWN ( 9 ) to move the “ ” mark to
“CH MEMORY”.
2.1 Press VOL (+) or (–) to access CH
MEMORY.
2.2 Use
CH UP ( 8 ) or DOWN ( 9 ) or
REMOTE KEYPAD to select each
desired channel to add or erase.
2.3 Press
VOL (+) to add a channel to the
TV’s memory or press
VOL (–) to erase
a channel from the TV’s memory.
→
(START)
(STOP)
or
→
→
→
→
→
Set Up (Continued)
36-37 CSR6036.p65e 21/6/01, 5:16 pm36