User`s guide

30 Options Guide RX100 S4
Installing a controller Controller in the PCI slots
Ê If necessary, connect cables onto the controller.
Figure 13: Riser card holder with riser card 1
Figure 14: Riser card holder with riser card 2
Ê Remove the PCI slot’s rear cover.
V CAUTION!
Keep the rear cover of the PCI slot for future use. If you remove the
controller again and do not replace it with a new one, the rear cover
must be reinstalled to comply with EMC regulations and to satisfy
cooling requirements and fire protection measures.
Ê Install the controller in in the PCI slot of the riser card. Make sure that the
rear of the controller’s slot cover is positioned in the intended recess.