Technical data

HOW TO USE THE FAX FUNCTION
91
8
You can avoid wasting fax paper by using the Anti Junk Fax function. This
function prevents the reception of faxes from up to ten specified parties.
To turn the Anti Junk Fax feature on and off, use the following procedure:
Factory setting: 2 (OFF)
Step Press these keys Comments
1 “ANTI JUNK FAX” will
appear in the display.
2 “ANTI JUNK SELECT” will
appear in the display.
3 Turn Anti Junk Fax on or
off.
4 Press the STOP key twice
to exit.
To cancel a timer operation:
If you need to cancel a timer operation after it has been set, follow the steps
below:
If the timer operation is a transmission operation, you will need to know the
number assigned to it. If you do not remember the number (it appears in the
display when you set the operation), print out the Timer List. See “Printing Out
Reports” in this chapter for details on how to print out the Timer List.
Step Press these keys Comments
1 “TIMER MODE” will
appear in the display.
2 Select “CLEAR”. “ENTER
# (1-3)” will appear in the
display.
3 Enter the 1-digit number
assigned to the operation.
(example)
4 “CLEARED” will appear in
the display.
5 Press the STOP key twice
to exit.
Anti Junk Fax
or
Special Functions
FUNCTION
ABC
STOP
STOP
ENTER
FUNCTION
ENTER
ABC
MNO
STOP
STOP
SUK 08 USING FAX LEO.p65 30/03/00, 17:2691