Technical data

5
INSTALLATION
1
1
Fan
Choosing a location
If the machine is moved from a cool place to a warm place,
condensation may form inside the machine. Operation in this
condition will cause poor copy quality and malfunctions. Leave the
machine at room temperature for at least 2 hours before use.
When moving the machine, hold iton both sides as shown below.
• Provide ample room for easy access
to the front, back, and sides of the
machine.
• Leave enough space around the
ventilation outlets for heat from the
fan to dissipate properly. Blocking
these outlets could cause the
machine to overheat, which can
cause serious damage to the
internal parts.
• Use of extension cords is not
recommended.
SUK 01 INSTALLATION LEO.p65 30/03/00, 17:455