Technical data

25
SPECIAL FUNCTIONS
3
3. SPECIAL FUNCTIONS
Description of special functions
Toner save mode (page 26)
Reduces toner consumption by approximately 10%.
Power save modes (page 27)
The copier has two power save modes of operation: preheat mode and auto
power shut-off mode.
Preheat mode
When the copier enters the preheat mode, the power save ( ) indicator will light
up and other indicators will remain on or off as before. In this condition, the fuser
in the copier is maintained at a lower heat level, thereby saving power. To copy
from the preheat mode, make desired copier selections and press the print ( )
key using the normal copying procedure.
Auto power shut-off mode
When the copier enters the auto power shut-off mode, the power save ( )
indicator will light up and other indicators will go out. The auto power shut-off
mode saves more power than the preheat mode but requires a longer time before
starting copying. To copy from the
auto power shut-off mode, press the print (
) key. Then make desired copier
selections and press the print ( ) key using the normal copying procedure.
Auto clear (page 27)
The copier returns to the initial settings a preset amount of time after the last
copy is made. This preset amount of time (auto clear time) can be changed.
SUK 03 SPECIAL FUNCTIONS LEO.p65 27/03/00, 14:4525