Technical data

35
PROBLEMS
5
5. PROBLEMS
Misfeed removal
1
If the paper is misfed here, process to
”A. Misfeed in the paper tray”.
If the misfed paper is seen from this side, proceed to
”C. Misfeed in the exit area”. (p. 37).
If the paper is misfed here, proceed to
”B. Misfeed in the copier”. (p. 36).
If a misfeed occurs when using the SPF, may appear in the display. This
indicates that one original must be returned to the document feeder tray after a
misfeed. Return one original. Then this number will disappear when copying is
resumed or the clear (
>
)key is pressed. When the SPF misfeeds an original shet,
the machine will stop and the SPF misfeed ( ) indicator will blink, while the misfeed
(t) indicator will remain off. For a misfeed of originals in the SPF, see ”D. Misfeed
in the SPF” on page 38.
A. Misfeed in the paper tray
Pull the paper release lever at the right of the paper tray toward you.
Paper release lever
When the misfeed (t) indicator blinks or blinks in the display, the copier will
stop because of a misfeed.
Check the misfeed location. Remove the misfed paper following the instructions
for each location in the illustration below.
If blinks in the display, proceed to “A Misfeed in the paper tray”.
SUK 05 MACHINE TROUBLE LEO.p65 30/03/00, 16:4735