Technical data

INITIAL SETTINGS
48
6
Note: You can view all of the items in the menu display by pressing the
FUNCTION key, then using the left and right arrow ( ) keys to
scroll through the function list. Pressing the ENTER key chooses the
displayed function. Procedures for inputting various items (name,
telephone number, date, etc.) are given as follows.
To have your name and fax number printed at the top of every page you
transmit, program them by pressing the operation panel keys as shown below.
• If you enter an incorrect character, press the left arrow ( ) key to move the
cursor back to the mistake, then enter the correct character. (To move the
cursor forward, press the right arrow ( ) key.)
Use the following procedure to enter your name and fax number:
Step Press these keys Comments
1 “ENTRY MODE” will
appear in the display.
2 “ENTER YOUR FAX #” will
appear in the display.
3 Enter your own fax number
(maximum 20 digits) by
pressing the number keys.
To insert a space between
digits, press the “ ” key. To
insert a “+”, press the “#”
(example: 18002374277) key.
4 “ENTER YOUR NAME” will
appear in the display.
5 Enter your name by
pressing the appropriate
number keys as shown on
the left. Press each key
repeatedly until the
desired letter appears in
the display (maximum of
24 characters). To enter a
space, press the 1 key
twice. To switch between
lower case and capital
letters, press the REDIAL
(example: SHARP) PAUSE key once.
6 “STORED” will appear in
the display.
7 Press the STOP key twice
to exit.
Entering Your Name and Fax Number
Fax Setup
FUNCTION
DEF
TUV
ABC
DEF
PQRS
ENTER
PQRS PQRS PQRS PQRS PQRS
GHI
ABC
PQRS PQRS PQRS PQRS
GHI GHI
ABC
PQRS PQRS
STOP STOP
ENTER
DEF
GHI
ABC
PQRS
PQRS
SUK 06 INITIAL LEO.p65 30/03/00, 17:0048