Technical data

INITIAL SETTINGS
55
6
The machine is set to automatically begin reception if you pick up from an
extension telephone and the machine detects a fax tone. However, if you are
using a modem on the same line, you must deactivate this function: otherwise
the machine will mistakenly attempt to receive the transmission from your
computer. To turn off the Fax Signal Receive function, follow the procedure
below.
Note: If you turn off the Fax Signal Receive function, be sure to activate the
Remote Reception function. See “Using the Remote Reception Function”
on the next page for details on how to do this.
Factory setting: 1 (ON)
Step Press these keys Comments
1 “OPTION SETTING” will
appear in the display.
2 “FAX SIGNAL RCV.” will
appear in the display.
3 Press 1 to turn Fax Signal
Receive on, or 2 to turn it
off.
4 Press the STOP key twice
to exit.
Setting Fine Resolution Priority
For most faxing jobs, you will most likely want to specify the resolution. However, you
can also set a default resolution when no setting is made using the RESOLUTION
key. When Fine Resolution Priority is turned on, all faxes will be sent in Fine Mode
unless otherwise specified. To turn on this function, follow the procedure below:
Factory setting: 2 (OFF)
Step Press these keys Comments
1 “OPTION SETTING” will
appear in the display.
2 “FINE PRIORITY” will
appear in the display.
3 Press 1 to turn Fine
Resolution Priority on, or 2
to turn it off.
4 Press the STOP key twice
to exit.
Fax Setup
Setting Up the Machine for Use with a PC Modem
FUNCTION
GHI
or
ABC
STOP
STOP
or
FUNCTION
GHI
ABC
STOP
STOP
SUK 06 INITIAL LEO.p65 30/03/00, 17:0055