Technical data

INITIAL SETTINGS
57
6
The machine is connected to a PBX, you can program machine to access
automatically public line outside PBX.
Factory setting: 2 (OFF)
Step Press these keys Comments
1 “OPTION SETTING” will appear
in the display.
2 “PBX SETTING” will appear in the
display.
3 Press 1 (YES) if the machine is
connected to a PBX.
Press 2 (NO) if the machine is
connected to a public line.
4 “PBX SELECT” will appear in the
display.
This parameter permits to define
how connection of a call from a
PBX to an external line is made.
For more details about this mode,
see operation manual of your PBX
or contact support department of
PBX dealer.
Press 1 for “FLASH” mode.
Press 2 for “ID PBX” mode.
5 “PBX ID CODE” will appear in the
display.
Enter identification number of your
PBX (max. 3 digits)
6 Press ENTER key to continue.
7 Press the STOP key twice to exit.
PBX Setting
4 “STORED” will appear in
the display.
5 Press the STOP key twice
to exit.
Fax Setup
ENTER
STOP
STOP
FUNCTION
GHI
ABC
ABC
ABC
WXYZ
ENTER
STOP STOP
or
or
SUK 06 INITIAL LEO.p65 30/03/00, 17:0157