Technical data

HOW TO USE THE FAX FUNCTION
75
8
Chain Dialing
The Chain Dialing function allows you to combine an Automatic Dialing number set
for Chain Dialing (see “Storing Numbers for Automatic Dialing” in Chapter 2) with
another Automatic Dialing number or digits entered manually with the number keys
to dial one phone number up to 50 digits long. The following are some examples of
how this can be done:
• Enter Speed Dial numbers that you have programmed for Chain Dialing. For example,
if you have stored the first part of a fax number in Speed Dial number 22 and the
second half in Speed Dial number 27, press the SPEED/SEARCH key and “22”,
then the SPEED/SEARCH key and “27”. Then press the FAX START key to begin
transmission.
• Press a Rapid key that is set for Chain Dialing and then manually enter a number
by pressing the appropriate number keys. Press the FAX START key after the
final number key to begin transmission. (You can use this method, for example,
when you have stored a long distance access code into a Rapid key, and want to
dial this in combination with a number that is not stored as an automatic dialing
number.)
Normal Dialing Using the SPEAKER Key
To dial using the SPEAKER, press the SPEAKER key and dial using the numeric
keys. You can hear the line and fax tones from the other machine through the
speaker, allowing you to confirm the response of the other machine.
1
Set the original in the SPF and
press the SPEAKER key.
(Refer to “Setting the
Document” earlier in this
chapter for details.)
• To adjust the volume, press the
left and right arrow keys (
).
2
Dial the number by pressing
the number keys, pressing a
Rapid Dial key, or entering a
Speed Dial number.
3
When you hear the fax
reception tone of the other
machine, press the FAX START
key.
Sending Originals
SPEAKER
GHI
PQRS
ABC
JKL
TUV
DEF
MNO
WXYZ
01 02 03 04 05
06 07 08 09 10
11 12 13 14 15
16 17 18 19 20/POLL
SPEED/SEARCH
GHI
PQRS
ABC
JKL
TUV
DEF
MNO
WXYZ
FAX START
SUK 08 USING FAX LEO.p65 28/03/00, 14:3775