Declaration of Conformity Hereby, Sharp Telecommunications of Europe Limited, declares that this 703SH is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the original declaration of conformity can be found at the following Internet address: http://www.sharp-mobile.
Introduction Congratulations on your new 3G/UMTS 703SH phone. About This User Guide This user guide is carefully designed to help you learn about your phone’s features and operations quickly and effectively. NOTICE • We strongly recommend that you keep separate permanent written records of all important data. Data may be lost or altered in virtually any electronic memory product under certain circumstances.
Powered by JBlend™ Copyright 1997-2005 Aplix Corporation. All rights reserved. JBlend and all JBlend-based trademarks and logos are trademarks or registered trademarks of Aplix Corporation in Japan and other countries. Powered by Mascot Capsule®/Micro3D Edition™ Mascot Capsule® is a registered trademark of HI Corporation ©2002-2005 HI Corporation. All Rights Reserved.
This product is licensed under the MPEG-4 Visual Patent Portfolio License for the personal and non-commercial use of a consumer to (i) encode video in compliance with the MPEG-4 Video Standard (“MPEG-4 Video”) and/or (ii) decode MPEG-4 Video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained from a licensed video provider. No license is granted or implied for any other use. Additional information may be obtained from MPEG LA. See http://www.mpegla.com.
Contents Introduction .......................................................................1 Your Phone ........................................................................7 Getting Started ..................................................................8 Inserting the SIM Card and the Battery .......................11 Removing the SIM Card and the Battery .....................12 Charging the Battery .................................................13 Inserting the Memory Card ......................
Sending a Contacts List Entry ....................................35 Receiving a Contacts List Entry ..................................35 Sending a Voice Clip Message or Video Clip Message Using an Address from the Contacts List ....................36 Synchronising Contacts List Entries with those on the Internet ....................................................................36 Camera ............................................................................37 Taking Pictures ........................
Video Call Settings ....................................................96 Security ...................................................................97 Master Reset ............................................................98 Call Log ............................................................................99 Call Timers ...............................................................99 Data Counter ............................................................99 Call Costs .............................
Your Phone Please check the following carefully.
Getting Started 1 19 10 18 11 2 20 3 12 4 5 13 14 15 6 7 16 8 26 17 8 9 Getting Started 27 21 22 24 23 25 28 29
1. Earpiece 2. Navigation Keys (Arrow Keys): abcd Moves cursor to highlight a menu item, etc. Up/Down arrow keys: Displays Contacts List entries in standby. Left arrow key: Displays the message inbox in standby. Right arrow key: Displays the monthly or weekly calendar in standby. 3. Centre Key: Displays Main menu in standby, and executes functions. 4. Left Soft Key: A Executes the function in the lower left of the screen. Displays Messaging menu in standby. 5. Send/Redial Key: D 6.
17. #/Silent Key: R Displays symbol screen on the text entry screen. Press and hold to switch languages on the text entry screen. Press and hold in standby to switch Profiles settings between the mode most recently activated and Silent mode. 18. Camera (External Camera) 19. Built-in Aerial: Warning: Do not cover the top of the phone with your hand when in use as this may interfere with the performance of the built-in aerial. 20. Battery Cover 21.
Inserting the SIM Card and the Battery 1. Slide off the battery cover ( ). 1 3. Hold the battery so that the metal contacts of the battery are facing down, slide the guides on the top of the battery into the battery slot ( ), and then insert it ( 7 ). 7 6 2 2. Slide the SIM card holder to unlock ( card in ( to lock ( ). Lift and put the SIM ). Then, slide the SIM card holder back into place ). SIM card 4. Replace the battery cover. Note • Make sure that only 3V SIM cards are used.
Removing the SIM Card and the Battery 1. Ensure that the phone is turned off and that the charger and other accessories are disconnected. Slide off the battery cover. 2. Lift the battery using the protruding edge and remove the battery from the phone. 3. Slide the SIM card holder to unlock ( ). Lift and remove the SIM card ( ). Then, slide the SIM card holder back into place to lock ( ). 1 2 3 12 Getting Started Battery Disposal The device is battery-powered.
Charging the Battery You must charge the battery for at least 140 minutes before using your phone for the first time. Using the Charger 1. Open the cover of the external connector, connect the charger to the external socket located at the bottom of the phone by pressing both sides indicated with arrows, and connect to an AC outlet. Small light To Disconnect the Charger When charging is complete, the small light turns off. 1.
Low Battery during Use When the battery is running low, an alarm will sound and “ ” is displayed on the main and external displays. If you are using your phone and you hear the low battery alarm, attach your charger as soon as possible. The phone may not be able to continue normal operation if you continue to use it. Battery Indicators Charge Level Sufficiently charged Charging recommended Charging required Empty Inserting the Memory Card 1. Turn off the phone. 2.
Connecting the Stereo Handsfree 1. Open and rotate the connector cover halfway around. 2. Connect the Stereo Handsfree. Note • If your PIN code is entered incorrectly three times in a row, the SIM card is locked. See “Enabling/Disabling the PIN Code” on page 97. • If the clock settings have not been entered, the date and time entry screen is displayed (p. 90).
Display Indicators (Main Display) Indicator area Left soft key 1. / Centre key : Strength of received signal/Service out of range : GSM/GPRS : Roaming outside network Getting Started : Flight mode 3. : Data exchange with external device 4. / : 5. / : 6. / / 7. / : 8. : 9. / 10. : 11.
14. / / / 15. / / : Speaker mode [speaker phone/speaker activated/ microphone muted] 16. (No display)/ 17. : 18. : 19. / 20. : : / : Silent/vibration setting [silent/increasing volume/ vibration enabled/silent and vibration enabled/ increasing volume and vibration enabled] Display Indicators (External Display) / / / / : Current profile [Normal/Meeting/Activity/Car/ Headset/Silent] Status Indicators 1. : Battery level Battery level 2. Daily alarm enabled 3.
Navigating Functions All applications are accessed from the Main menu. To open the Main menu, press the centre key ( ) in standby. To launch applications, you will need to highlight menu items, and make selections. To select a menu item (indicated in quotation marks), move the cursor using a, b, c and d, and press to select. In certain procedures, you will need to press one of the soft keys (indicated in square brackets), which are displayed in the lower left and right of the screen.
Voice Call/Video Call Functions Making a Voice Call 1. Enter the area code and the phone number you wish to dial and press D to dial. If you enter the wrong number, press U to delete the number to the left of the cursor. Emergency Calls 1. Enter 112 (international emergency number) using the keypad and press D to dial. Note • Emergency calls may not be able to be made on all mobile phone networks when certain network services and/or phone features are in use.
Redialling You can redial numbers in the call log. Select from specific categories or “All Calls”. Specific categories contain up to 30 numbers and the “All Calls” list contains up to 90. 1. Press D in standby. 2. Select the category from “All Calls”, “Dialled Numbers”, Rejecting an Incoming Call 1. Press F while the phone is ringing to reject a call you do not wish to answer. “Missed Calls” or “Received Calls”. To switch logs, press c or d. 3. Highlight the phone number you wish to call.
Turning the Speaker On and Off You can talk via the loudspeaker on the clamshell cover of the phone when it is on. 1. During a call, press [Options] and select “Loudspeaker On”. Putting a Call on Hold This function allows you to manage two calls at the same time. If you wish to make another call while you are talking to someone, you can put the current call on hold to call someone else. To Make Another Call during a Call 1. During a call, press [Options] and select “Hold”. The current call is put on hold.
To Make a Conference Call You must have one active call and one held call. 1. During a call, press [Options] and select “Multi Party”. 2. Select “Conference All” to join the conference call. 3. Press F to end the conference call. Note • The conference call service may not be available on all networks. Contact your service provider for more information. • You have more options for the Conference call in step 2: • To put all participants on hold, select “Hold All”.
Making a Video Call Note • Use this function with only the video call enabled phones. • Make sure that the battery is fully charged and the signal is strong before using this function. • Turn the loudspeaker on or use a switch-equipped Stereo Handsfree or handsfree kit so that you can talk while looking at the video call screen on the main display. 1 Status Indicators 1. Sub screen for your image 2. Elapsed time 3. Main screen for the calling party’s screen 4.
Rejecting an Incoming Call 1. Press F while the phone is ringing to reject a call you do not wish to answer. Letting the Caller Know You are Unavailable 1. Press [Busy] while the phone is ringing to send a busy tone to the caller of an incoming call letting them know that you cannot answer the call. In Call Menu (Video Call) Muting the Microphone 1. During a video call, press [Mute]. To use the microphone again, press [Unmute]. Swapping Images You can swap images between the main and sub screens. 1.
Video Call Settings To Adjust the Video Exposure To Adjust the Quality of the Incoming or Outgoing Image You can adjust the quality of the called party’s or caller’s image. 1. During a video call, press [Options] and select “Video Call Settings”. 1. During a video call, press [Options] and select “Video Call 2. Select “Incoming Picture Quality” or “Outgoing Picture Mirror Image During a video call, you can reverse your image on the sub screen. 1.
Entering Characters Table of Characters Pressing each key scrolls characters in the following order. The order varies depending on the language selected. English Mode Upper Case Characters Key G H I J K L M N 26 Lower Case Characters O Q P R Numeric .
Changing the Input Language 1. On the text entry screen, press [Options] and select “Input Language”. Symbols and Punctuation 1. On the text entry screen, press [Options] and select “Add Symbol”. 2. Select the desired language. 2. Select the desired symbol. Changing the Input Mode My Dictionary T9 Text Input T9 text input method is a shortcut to enter text easily and quickly. 1. On the text entry screen, press and hold P to enter T9 mode. 2. Press [Options] and select “Input Mode”. 3.
Using Templates You can use the phrases registered in Text Templates when entering characters. For details on creating the text template, see “Adding Phrases to Text Templates” on page 64. 1. On the text entry screen, move the cursor to the point you wish to insert the template. 2. Press [Options] and select “Advanced”. 3. Select “Insert Template”. 4. Select the desired text template. Copying, Cutting and Pasting Text 1. On the text entry screen, press [Options] and select “Advanced”. 2.
Using the Menu Main Menu Shortcut Keys You can access menus by pressing and digit keys for the corresponding number on the Main menu. For numbers 10 to 12, press and P (10), Q (11) or R (12). See “List of Menu Functions” on page 122. Shortcuts are listed in the headings of this user guide. Examples: To Access “Videos” Sub Menu (M 6-4) Using Shortcut Keys Press L J. To Access “Totals” Sub Menu (M 7-10-2) Using Shortcut Keys Press M P H. 1. Press in standby. The Main menu is displayed. 2.
Contacts List (M 8-1) 30 Items Saved in the SIM Memory (depending on the SIM card) You can store the phone numbers and Email addresses of your friends, family and colleagues in the Contacts List. Your phone can store up to 500 entries.
Sorting the Contacts List Entries (M 8-8-4) Viewing My Contact Details (M 8-5) Add New Contact Copying Contacts List Entries between SIM Card and Handset (M 8-9-1) You can choose either the phone or SIM card memory locations to store the new entry. For switching locations, see “Selecting the Storage Memory” on page 30. The amount of phone numbers that you can store to the SIM card is dependent on its capacity. Contact your service provider for details.
Finding a Name “Contacts” → “Contacts List” 1. Enter the first few letters of the name. Search results are displayed in alphabetical order. Tip • You can select the Contacts location from “Handset” or “SIM” before searching. Dialling from the Contacts List “Contacts” → “Contacts List” 1. Highlight the desired entry and press D. Tip • If more than one phone number is registered for the entry, highlight the desired phone number after step 1 and press D.
Assigning a Ringtone or a Ring Video Clip to Each Entry “Contacts” → “Contacts List” 1. Highlight the desired entry. 2. Press [Options] and select “Edit”. 3. Select “Assign Tone/Video”. 4. Select “For Voice Call”, “For Video Call” or “For New Message”. 5. Select “Assign Tone” or “Assign Video”. When selecting “Assign Video”, go to step 7. 6. Select “Preset Sounds” or “My Sounds”. 7. Select the desired tone or video clip. 8. Press [Save] when finished.
Editing the Category Name You can edit category names to be assigned to the Contacts List entries. First, change the Contacts List displayed (p. 30). “Contacts” → “Manage Category” 1. Highlight the desired category name. 2. Press [Options] and select “Edit Name”. 3. Modify the name. Contact Groups (M 8-6) You can create a mailing list to send the same message to a group of recipients at once. Up to 5 groups can be registered. Creating a New Mailing List “Contacts” → “Contact Groups” → “Add New Group” 1.
Memory Status (M 8-9-2) This function helps you to check the memory used in the Contacts List. “Contacts” → “Manage Contacts” → “Memory Status” Speed Dial List You can set a maximum of 8 phone numbers in the Speed Dial list (p. 19). Setting Contacts List Entries in the Speed Dial List “Contacts” → “Contacts List” 1. Select the desired entry. 2. Highlight the desired phone number. 3. Press [Options] and select “Add to Speed Dial”. 4. Select the desired location.
Sending a Voice Clip Message or Video Clip Message Using an Address from the Contacts List Viewing the Log (M 8-7-2) “Contacts” → “Synchronise” 1. Select “View Log”. “Contacts” → “Contacts List” 1. Select the desired entry including the phone number or Email address you wish to use. Synchronisation Settings (M 8-7-3) “Contacts” → “Synchronise” → “Sync Settings” 1. Select the desired account or “Create New” to enter the following settings.
Camera (M 5) Your phone has a built-in digital camera that allows you to take pictures and record video clips wherever you are. This section starts with basic functions and operational procedures to take, save and send pictures and video clips, followed by common and unique functions to camera and video modes. Taking Pictures “Camera” 1. Press to take the picture. The shutter sounds and the still image of the taken picture is displayed. 2. Press [Save]. The taken picture is saved in My Items.
Recording Video Clips You can record a video clip with your phone. Recording Video Clips “Camera” The preview is displayed on the screen. 1. Press . 2. To stop recording, press 3. Select “Save”. . The video clip is saved in My Items. To view the preview before saving, select “Preview”. To send the video clip, select “Save and Send”. Then select the desired way you wish to send. For further procedures, see “Creating a New Message” on page 44.
Using the Self-Timer Select the appropriate option. “Camera” → [Options] → “Modes” → “Self-timer” (Photo Camera Mode) “Camera” → [Options] → “Self-timer” (Video Camera Mode) 1. Select “On” or “Off”. “ ” is displayed on the screen when you select “On”. Switching between the Photo and Video Camera Modes You can switch between the camera and video camera modes by pressing c or d. Select the appropriate option.
Common Shortcut Keys If multiple options exist, they switch each time you press each following key. Photo Camera Video Camera G Zoom Max/Min H Exposure I J Save New Pictures to K L M N Save New Videos to Picture Size Microphone On/Off Picture Quality Video Quality Self-timer On/Off O P Q Change External Camera/Internal Camera Switches Viewfinder Switches Screen R Note • The “Switches Screen” option is available in “Preview” before you save a video clip.
Continuous Shoot There are various modes for taking continuous shots. “Camera” → [Options] → “Modes” → “Continuous Shoot” 1. Select the desired mode. The following continuous shoot modes are available: “Off”: The continuous shoots are cancelled. “4 Pictures”/“9 Pictures” ( / ): Takes 4 or 9 pictures continuously. After selecting this mode, select from five types of speed or “Manual”. “Overlapped” ( ): Overlaps continuous pictures into one picture and makes an afterimage.
Selecting the Shutter Sound “Camera” → [Options] → “Settings” → “Shutter Sound” 1. Select the desired shutter sound from 3 preset patterns. Note • Continuous Shoot uses the specialised shutter sound that cannot be changed from the above settings. • The shutter sound remains active even when “General Volume” (p. 84) is set to “Silent” to prevent unauthorised use. Functions in the Video Camera Mode Selecting the Recording Time and Size “Camera” → [Options] → “Record Time/Size” 1.
Messaging (M 4) Your phone allows you to send and receive text, multimedia and Email. 1 SMS SMS allows you to send text messages up to 765 characters long. If you send a message of more than 160 characters, it is split into several segments. 2 4 MMS 3 MMS allows you to send and receive multimedia messages of up to 300 KB with images, sound, or video clips attached. Email Email allows you to send messages of up to 300 KB. Note • Some MMS functions may not always be available depending on your network.
Creating a New Message (M 4-1) (SMS/MMS) A → “Create Message” → “Message” (Email) A → “Create Message” → “Email” 1. Select the address field. 2. Select the desired method to enter the address. 3. For MMS, enter or select the Email address or phone number from the Contacts List. For SMS, enter or select a phone number. For Email, enter or select an Email address.
If you wish to take new pictures, record sounds or video clips, select “Take Picture”, “Record Voice” or “Record Video”. • When attaching JPEG files, select the appropriate resize option, as the maximum message size for sending varies depending on the service provider. To Attach a Contacts List Entry 1. In step 5 in “Creating a New Message” on page 44, highlight the “Others” indicator in the lower right of the screen. Press and select “Attach Contact”. 2. Select the desired entry.
Note • The current message size displayed while you are creating the message is an approximation. • If a message cannot be sent for some reason, the message stays in the Outbox and the “ ” is displayed in standby. Tip • To save the message without sending, press [Options] and select “Save to Drafts” in step 5 in “Creating a New Message” on page 44. • You can send the following items attached to multimedia messages. Details are given in the following sections.
Storing the Phone Number of a Sender in the Contacts List A → “Inbox” 1. Highlight the message from which you wish to store the phone number or Email address. 2. Press [Options] and select “Save Address”. The new Contacts List entry screen including the phone number is displayed. For details on creating a new Contacts List entry, see “Add New Contact” on page 31. Calling the Phone Number of a Sender Embedded in the Message A → “Inbox” 1. Highlight the message including the phone number you wish to dial.
Forwarding a Message A → “Inbox” 1. Highlight the message you wish to forward. Note • This service is not available with some service providers. Please contact your service provider for more information. 2. Press [Options] and select “Forward”. 3. Perform steps 1 to 6 in “Creating a New Message” on To Create a New Postcard See the note on page 123 for menu indications. A→ “Create Message” → “Postcard” → “Saved Pictures” 1. Select a picture you wish to send.
• “Additional Information” (optional): Additional information of the recipient up to 50 bytes • “Street & Number” (mandatory): Street and number up to 50 bytes • “City” (mandatory): City up to 50 bytes • “Postal Code” (optional): Postal code up to 20 bytes • “State/Province” (optional): State, province, and region up to 50 bytes • “Country” (optional): Country up to 20 bytes 4. Press [Options] and select “Send Postcard”.
• “Expiry Time”: This indicates the number of days and hours for which a message you send may remain undelivered to the message recipient. During this period, the message service centre will continually try to deliver the message to the recipient. • “Delivery Report Allow”: Confirms whether or not a report is sent notifying the sender when you receive an MMS/SMS. • “Read Report Allow”: Enables or disables Read Report Allow when the recipient is required to inform the sender that the message has been read.
MMS Settings (M 4-9-3) A → “Messaging Settings” → “MMS Settings” 1. Select the item you wish to set up. • “MMS Accounts”: Select the desired account or select “Create New” to enter the following settings. “Profile Name”: MMS profile name (Unique name) “Proxy”: Proxy setting for MMS “Relay Server URL”: MMS relay server • “Slide Duration”: Sets the duration of the slide. • “Max Message Size”: Sets the maximum message size for sending and disables sending MMS messages exceeding that size.
To Read Cell Broadcast Messages A → “Messaging Settings” → “Cell Broadcasts” → “Read Messages” 1. Select the desired subject. 2. Scroll the screen to read the message. 3. Press [Back]. To Set Languages for Cell Broadcast Messages A → “Messaging Settings” → “Cell Broadcasts” → “Settings” → “Language” The current language is displayed. 1. Press . 2. Press to check. 3. Press [Save]. To Subscribe to Cell Broadcasts Select the page of the cell broadcast message that you want.
Vodafone live! (M 2) Your phone is already configured to access Vodafone live! and the mobile internet*. Vodafone live! is a new mobile internet portal which is your gateway to a new world of information, games, music and services. Because your phone uses 3G (UMTS), it has a system that is much faster than previous ways of getting mobile information. Also, the connection is ‘always on’ which means there is no need to wait for dialling up.
Navigating a WAP Page • a b c d: Move the highlights around in the screen. • : Executes the option displayed in the lower centre of the screen. • A: Launches the browser option menu. • C: Selects an action displayed in the lower right of the screen. Used to access “Vodafone live!” by opening the browser. • F (short press): Exits the browser. (press and hold): Turns off the phone. 54 Vodafone live! Editing Bookmarks (M 2-3) “Vodafone live!” → “Bookmarks” 1.
Browser Settings (M 2-7) “Vodafone live!” → “Browser Settings” “Font Size”: Sets the size of the browsing font. “Scroll Step”: Sets the speed of scrolling. “Send Referrer”: Enables or disables the notification of the referrer. “Cookies”: Adjusts the setting of cookies. “Downloads”: Disables downloading data from the images/sounds/objects. “Security”: Adjusts the security prompt level. “WAP Push”: Sets whether you need confirmation for push message. “Download to”: Sets the download location.
Music (M 3) Music Player You can play back MP3, AAC and AAC+ format sound files with Music Player. While playing back sound files in the background, you can use other menus. Playing Back Sound Files “Music” → “My Music” 1. Select “All Music” or the desired playlist. 2. Select the desired file. To pause playback, press . To stop playback, press [Back]. Note • You are asked whether or not to play sounds when the Silent mode is activated. • To play the last played file, select “Last Played Music”.
Searching a File to Be Played Back “Music” → “My Music” 1. Select “All Music” or the desired playlist. Adding a New Playlist “Music” → “My Music” 1. Press [Options] and select “Add New Playlist”. 2. Press [Options] and select “Search”. 3. Enter the first few letters of the title. 2. Enter the desired playlist name. 3. Press . Search results are displayed in alphabetical order and the matching file is highlighted. Adding a File to the Playlist You can create a playlist registering desired files.
My Items (M 6) My Items contains several types of picture, sound and video clip data. Also included in My Items are frequently used text message phrases and WAP sites which you can use for downloading. You can also transmit picture, sound and video clip data via infrared or Bluetooth wireless technology to OBEX-enabled phones. Pictures (M 6-1) Pictures that are taken by a digital camera or images that are downloaded from mobile Internet sites can be managed.
Editing Pictures “My Items” → “Pictures” 1. Highlight the file you wish to edit. Downloading Picture Files “My Items” → “Pictures” → “Get new” The picture file download site is displayed. 2. Press [Options] and select “Picture Editor”. 3. Select the desired option. Sounds & Ringtones (M 6-2) Note • “Picture Editor” may not be available depending on the original picture and copyright issued. Adjusting the Size You can adjust the picture to an appropriate size depending on the scene.
Using the Sound Files as a Ringtone “My Items” → “Sounds & Ringtones” 1. Highlight the file you wish to use as a ringtone. 2. Press [Options] and select “Set as Ringtone”. Note • AMR format music files cannot be used for ringtones. Tip • For other option menus, see “Common Option Menus” on page 61. Downloading Sound Files “My Items” → “Sounds & Ringtones” → “Get new” The sound file download site is displayed.
Other Documents (M 6-6) Some types of files are stored in the Other Documents folder of the phone. You can edit and use these files as My Items data. Opening the Document File “My Items” → “Other Documents” 1. Press d to display the list from the memory card and c to return to the handset memory. 2. Select the desired file. Tip • For other option menus, see “Common Option Menus”.
Receiving My Items Data When the phone receives My Items data, a confirmation message is displayed in standby. 1. Press [Yes]. The received data is saved in the corresponding My Items folder. Tip • For details on Infrared or Bluetooth wireless settings, see “Connectivity” on page 101. Using My Items Data You can copy, move, sort, rename, and delete the saved My Items data. Select the appropriate option.
To See the My Items Details Select the appropriate option. “My Items” → “Pictures” “My Items” → “Sounds & Ringtones” “My Items” → “Videos” “My Items” → “Other Documents” 1. Highlight the file you wish to view the details of. 2. Press [Options] and select “Details”. Uploading My Items Data You can upload your picture, sound or video clip files to the Media Album. “My Items” → “Pictures” “My Items” → “Sounds & Ringtones” “My Items” → “Videos” 1. Highlight the file you wish to upload. 2.
Text Templates (M 6-5) You can register up to 50 text templates for use in text messages and multimedia messages. A maximum of 256 characters can be used for a single text template. Adding Phrases to Text Templates “My Items” → “Text Templates” → “Add New Template” 1. Enter the text and press . Editing Text Templates “My Items” → “Text Templates” 1. Highlight the text template you wish to edit. 2. Press [Options] and select “Edit”. To view the text template, press [Options] and select “View”.
Entertainment (M 1) Games & Applications (M 1-1) Using Applications (M 1-1-1) Various kinds of Vodafone specific applications can be used on this phone. To use applications, download the applications via the mobile Internet. Some applications offer the ability to connect to a network either within a game or a network based application. Note • Applications may be both localised (no connectivity) and network based (using the mobile Internet to update information/play games).
Setting Permission You can set permission for selected Java™ applications. “Entertainment” → “Games & Applications” → “Games & Applications” 1. Highlight the desired Java™ application. 2. Press [Options] and select “Permission”. 3. Select one of the following options: “Phone Call”: “Network Access”: “Messaging”: “Autorun”: “Local Connection”: “Read User Data”: “Write User Data”: “Use Multimedia”: “Location Access”: 66 Entertainment Sets permission to make voice calls.
Deleting an Application You can delete an application from the handset memory. “Entertainment” → “Games & Applications” → “Games & Applications” 1. Highlight the desired Java™ application. 2. Press [Options] and select “Delete”. Settings (M 1-1-2) Application Volume You can set the volume of the application such as the sound effect to one of the five levels or silent. When the profile is set to “Silent”, the “General Volume” setting (p. 84) has priority.
Vibration When the vibrator is set in the application, you can choose whether the operation is enabled or disabled. “Entertainment” → “Games & Applications” → “Settings” → “Vibration” 1. Select “On” or “Off”. • “Call Notice”, “Message Notice” or “Alarm Notice”: The marquee (character scrolls) is displayed on the first line of the screen while the application continues. If you press D, the application is suspended, and you can receive a call or a message.
To Set the Suspend Time “Entertainment” → “Games & Applications” → “Settings” → “Screensavers” → “Suspend Time” 1. Set the desired time period from “after 15 min.” to “after 6 hours”. Default Settings All the settings for “Games & Applications” can be reset. “Entertainment” → “Games & Applications” → “Settings” → “Set to Default” 1. Enter your handset code. Clearing All Memory The Java™ applications in the handset memory can be reset.
Searching a File to Be Played Back “Entertainment” → “TV & Video” → “My Videos” 1. Select “Handset Memory” or “Memory Card”. Adding a New Playlist “Entertainment” → “TV & Video” → “My Videos” 1. Select “Handset Memory” or “Memory Card”. 2. Select “All Videos” or the desired playlist. 3. Press [Options] and select “Search”. 4. Enter the first few letters of the title. 2. Press [Options] and select “Add New Playlist”. 3. Enter the desired playlist name. 4. Press .
Settings You can select a play mode for “Playback Pattern”, “Backlight” and “Display Size” when playing back video clip files. “Entertainment” → “TV & Video” → “My Videos” 1. Select “Handset Memory” or “Memory Card”. 2. 3. 4. 5. 6. Select “All Videos” or the desired playlist. Select the file for which you wish to adjust the play mode. Press [Options] and select “Settings”. Select “Playback Pattern”, “Backlight” or “Display Size”.
Playing Back the Video Clip Files To Play Back the Last File (M 1-2-1) “Entertainment” → “TV & Video” → “Last Played Video” Streaming (M 1-2-2) You can play back video clip files while downloading them from the mobile network. You can also register the address of the Web site as a bookmark. “Entertainment” → “TV & Video” → “Streaming” 1. Select “Last Played Streaming”, “Enter URL”, “Favourites”, “Access Log” or “Display Size”. “Last Played Streaming”: Shows the last streaming file.
Organiser & Tools (M 7) Calendar (M 7-1) Calendar allows you to easily schedule appointments or events at any given date or time. These entries can also be sent via Infrared or Bluetooth wireless technology to a PC to share the same schedules. When you exchange entries with other devices, the date and time displayed may be different to that of the original data depending on the data format of the receiving device. Creating a New Entry “Organiser & Tools” → “Calendar” 1.
To Enter the Description 1. On the New Entry screen, select “Description”. 2. Enter a memo for the schedule entry. To Make the Entry Secret 1. On the New Entry screen, select “Secret”. 2. Select “On” to make the data secret or select “Off” to leave it as it is. Viewing a Schedule Entry “Organiser & Tools” → “Calendar” 1. Select the day you wish to view. Editing a Schedule Entry “Organiser & Tools” → “Calendar” 1. Select the day and the desired entry you wish to edit. To Search By Date 1.
“Up to Last Week” (weekly view): Deletes all entries before this week. “All This Month” (monthly view): Deletes all entries for the selected month. “Up to Last Month” (monthly view): Deletes all entries before this month. “All Appointments” (weekly and monthly view): Deletes all entries in this application. Sending a Schedule Entry “Organiser & Tools” → “Calendar” 1. Select the day and the desired entry including schedule entries you wish to send. 2. Press [Options] and select “Send”. 3.
To Change the Type of Repeat Options 1. On the Set Alarm screen, select “Repeat”. 2. Select “Once Only”, “Every Day” or “Selected Days”. “Once Only”: “Every Day”: “Selected Days”: The alarm sounds once only. The alarm sounds every day at the specified time. The alarm sounds on the selected day of the week at the specified time. To Change the Type of Alarm Tone or Video Clip File 1. On the Set Alarm screen, select “Assign Tone/Video”. 2.
Calculator (M 7-3) The calculator function performs the 4 arithmetic calculations using up to 12 digits. “Organiser & Tools” → “Calculator” Key operations for calculation are as follows: To Set a Currency Conversion Rate “Organiser & Tools” → “Calculator” → [Options] → “Currency Converter” → “Exchange Rate” 1. Select “Domestic” or “Foreign”. 2. Enter the currency conversion rate. To Convert a Value “Organiser & Tools” → “Calculator” 1. Enter the value to be converted. 2.
Note • Press a (or V) or b (or W) to adjust the sound volume when playing back the recorded file. Sending Voice Clips “Organiser & Tools” → “Voice Recorder” 1. Press to start recording. 2. Press to stop recording. 3. Select “Save and Send”. 4. Select “As Message”. For details on creating a message, see “Creating a New Message” on page 44. Selecting the Record Time “Organiser & Tools” → “Voice Recorder” → [Options] → “Record Time” 1. Select “For Message” or “Extended Voice”.
Adding a Bookmark You can add up to two bookmarks to each E-Book file. “Organiser & Tools” → “E-Book” 1. Select the desired file. 2. Press [Options] and select “Bookmark”. 3. Select “Bookmark1” or “Bookmark2”. Note • E-Book files cannot be viewed while “Music” or “Games & Applications” is in use. • If you remove the memory card while the E-Book is in use, a confirmation message appears and your phone returns to standby. Stopwatch (M 7-6) You can store 4 lap times when using the stopwatch function.
To Change the Duration of Alarm Tone or Video 1. On the New Entry screen, select “Reminder”. 2. Select “Duration”. 3. Select the time period. When you select “Other”, you can enter the desired time in two digits using the keypad. To Change the Description 1. On the New Entry screen, select “Description”. 2. Enter a memo for the task entry. To Make the Entry Secret 1. On the New Entry screen, select “Secret”. 2. Select “On” to make the data secret or select “Off” to leave it as it is.
World Clock (M 7-8) Countdown Timer (M 7-9) Setting the Time Zone “Organiser & Tools” → “World Clock” 1. Press [Edit] and select “Set Time Zone”. The current time zone is indicated by red line on the world map. 2. Press c or d to change the time zone. “Organiser & Tools” → “Countdown Timer” 1. Enter the time to count. You can set the time from 1 second to 60 minutes. 2. Press to start counting. 3. Press . To Set the Custom Time Zone “Organiser & Tools” → “World Clock” 1.
Expenses Memo (M 7-10) You can record an expenses memo with predefined or edited categories. Recording in the Expenses Memo (M 7-10-1) “Organiser & Tools” → “Expenses Memo” → “Add New Expense” 1. Enter the expenses using the digit keys. 2. Select the desired category. Expenses memo is registered. Viewing Totals (M 7-10-2) “Organiser & Tools” → “Expenses Memo” → “Totals” Recorded expenses are displayed on the screen. To Change Amount 1. In the total view, select the desired item. 2.
SIM Application (M 11) You can refer to the information on the SIM/USIM. Contact your service provider for further details.
Settings (M 12) Profiles (M 12-1) The ringtone, sound, vibration and light settings can be customised for each profile according to your environment. There are 6 profiles: “Normal”, “Meeting”, “Activity”, “Car”, “Headset” and “Silent”. Activating a Profile “Settings” → “Profiles” 1. Select the desired profile. Note • When a profile is set, the corresponding indicator described on page 17 is displayed in standby.
1. 2. 3. 4. 5. 6. 7. Highlight the profile you wish to customise. To preview the file, press [Options] and select “Play”. Select “Ringtone/Ringvideos”. 7. Press [Options] and select “Select”. Select “For Voice Call” or “For Video Call”. Message Notification When receiving messages, your phone will notify you of their arrival with the ringtone or ring video you specify. “Settings” → “Profiles” 1. Highlight the profile you wish to customise. Select “Assign Tone”. Select “Preset Sounds” or “My Sounds”.
Keypad Tones When the keypad tone is set on, you will hear a confirmation tone each time you press any keys. “Settings” → “Profiles” 1. Highlight the profile you wish to customise. Power On/Off Sound The phone can be set to emit a sound when it is switched on or off. You can set the duration and melody of the sound. “Settings” → “Profiles” 1. Highlight the profile you wish to customise. 2. 3. 4. 5. 6. 2. 3. 4. 5. Press [Options] and select “Personalise”. Select “System Sounds”. Select “Keypad Tones”.
Event Light When the light option is on, the small light blinks while the phone receives a call or message. “Settings” → “Profiles” 1. Highlight the profile you wish to customise. Any Key Answer You can answer a call by pressing any key except F, U and [Busy]. For details, see “Answering a Voice Call” on page 20. “Settings” → “Profiles” 1. Highlight the profile you wish to customise. 2. Press [Options] and select “Personalise”. 3. Select “Event Light”. 4.
System Graphics (M 12-2-2) Pictures can be displayed when turning the power on or off, when receiving an incoming call, or when operating the alarm. Pictures taken with the digital camera or images downloaded from a WAP site can be used. To Use Preset Animation/Pattern “Settings” → “Display Settings” → “System Graphics” 1. Select the desired scene to set the picture to. 2. Select “Preset Animation” when you select “Power On” or “Power Off” in step 1.
To Select the Backlight Time Out “Settings” → “Display Settings” → “External Display” → “Backlight” 1. Select the desired time out. Select “Off” to shut the backlight off. To Adjust the LCD Contrast You can adjust the LCD contrast to suit certain lighting conditions. “Settings” → “Display Settings” → “External Display” → “LCD Contrast” 1. Press a (Light) or b (Dark) to switch between 9 levels of clarity. 2. Press .
Sound Settings (M 12-3) You can use this menu to check or edit the current Profiles settings (except “Any Key Answer”). Date & Time (M 12-4) You need to set the correct time and date in order for your phone’s various time-based functions to work correctly. “Settings” → “Date & Time” → “Set Date/Time” 1. Enter the day, month and year using the digit keys. 2. Enter the time using the digit keys. Tip • When you enter the time in the 12-hour format, press a or b to switch between am and pm.
Selecting the Time Format (M 12-4-6) “Settings” → “Date & Time” → “Time Format” 1. Select “24 Hour” or “12 Hour”. Selecting the Date Format (M 12-4-7) “Settings” → “Date & Time” → “Date Format” 1. Select “D.M.Y”, “M-D-Y” or “Y/M/D”. Setting the Calendar Format (M 12-4-8) “Settings” → “Date & Time” → “Calendar Format” 1. Select “Sunday-Saturday” or “Monday-Sunday”. Language Setting (M 12-5) You can change the language displayed on the phone. “Settings” → “Language” 1. Select the desired language.
To Activate the Voicemail Service “Settings” → “Call Settings” → “Voicemail & Diverts” → “Voicemail” → “Activate” 1. Select one of the following options: “Always”: Diverts all calls without ringing. “When Busy”: Diverts incoming calls while you are talking on the phone. “No Answer”: Diverts incoming calls if you do not answer a call within a certain period of time. “Not Reachable”: Diverts incoming calls when your phone has no network service or is switched off.
To Check the Diverts Status “Settings” → “Call Settings” → “Voicemail & Diverts” → “Status” 1. Select the diverts option you wish to check. If you wish to be able to receive another incoming call while you have a call in progress, you must activate the Call Waiting service. “Settings” → “Call Settings” → “Call Waiting” 1. Select “On”, “Off” or “Status”. To Deactivate the Diverts/Voicemail Service “Settings” → “Call Settings” → “Voicemail & Diverts” → “Deactivate” 1. Select the desired option.
1. Select “Outgoing Calls” or “Incoming Calls”. “Outgoing Calls”: Restricts outgoing calls. “Incoming Calls”: Restricts incoming calls. 2. Select one of the following options: (For “Outgoing Calls”) “Bar All Outgoing Calls”: Restricts all outgoing calls except emergency calls. “Bar International Calls”: Restricts all outgoing international calls. “Only Local & Home”: Restricts all outgoing international calls except to your home country.
Withheld Call When the “Withheld Call” is set, incoming calls without a CLI (Calling Line Identification) are rejected. “Settings” → “Call Settings” → “Restrict Calls” → “Withheld Call” 1. Select “On” or “Off”. Changing the Network Password “Settings” → “Call Settings” → “Restrict Calls” → “Change N/W Password” 1. Enter the old network password. 2. Enter a new network password. 3. Enter the new network password again. If you enter the incorrect password, you are asked to enter the password again. 4.
Displaying Call Costs (M 12-6-7) “Settings” → “Call Settings” → “Display Call Cost” 1. Select “On” or “Off”. Auto Redial (M 12-6-8) “Settings” → “Call Settings” → “Auto Redial” 1. Select “On” or “Off”. Video Call Settings (M 12-7) Set various types of functions and services for video calls. Selecting an Image for the Alternative Image (M 12-7-1) You can select an image shown to the caller between the sub camera image and an alternative image from the saved picture files.
Mute (M 12-7-6) You can mute the microphone while making a video call. “Settings” → “Video Call Settings” → “Mute Microphone” 1. Select “On” to mute or “Off” to cancel mute. Assigning Hold Guidance Picture (M 12-7-7) You can display an image saved in the phone on your main display while you are putting a call on hold. “Settings” → “Video Call Settings” → “Hold Guidance Pict” 1. Select “Preset Picture” or “My Pictures”. 2. Select the desired picture.
Function Lock (M 12-8-4) By setting this option on, all the functions of your phone will be locked until the correct handset code is entered. “Settings” → “Security” → “Function Lock” 1. Enter your handset code. The default handset code is “9999”. For details on changing the handset code, see “Changing the Handset Code”. Changing the Handset Code (M 12-8-7) The default handset code is “9999”. “Settings” → “Security” → “Change Handset Code” 1. Enter the old handset code.
Call Log (M 9) The phone will record the last 30 missed calls, received calls and dialled numbers. Viewing Call Log “Call Log” 1. Select “All Calls”, “Dialled Numbers”, “Missed Calls” or “Received Calls”. The selected call log list is displayed. To switch logs, press c or d. 2. Select the phone number you wish to view. If you wish to dial the number, press . Tip • You can also confirm call logs by pressing D in standby. Sending Messages 1.
Call Costs (M 9-7) This function lets you check the charges for your calls. Some networks do not support Charging Advice. Please check with your service provider for availability. Checking the Cost of the Last Call (M 9-7-1) “Call Log” → “Call Costs” → “Last Call” Checking the Total Call Cost (M 9-7-2) “Call Log” → “Call Costs” → “All Calls” Setting the Charge Rate (M 9-7-5) Set the charge rate to calculate the call cost and set the maximum limit for call cost.
Connectivity (M 10) By configuring the settings in this menu, you can connect to Bluetooth wireless technology or Infrared enabled phones via these connections, as well as a PC via Bluetooth wireless technology or Infrared connections. Bluetooth (M 10-1) For using the Bluetooth wireless function, you need to search for other Bluetooth wireless technology enabled devices to establish contact with your phone. Keep your phone within a distance of 10 metres from the devices before searching.
To Activate the Paired Device (M 10-1-4) Paired devices are listed by tabs for all devices and for handsfree devices. “Connectivity” → “Bluetooth” → “Paired Devices” 1. Press d to switch to the list for handsfree devices. 2. Select the desired device you wish to activate. To Check and Uncheck the Paired Handsfree Devices “Connectivity” → “Bluetooth” → “Paired Devices” 1. Select handsfree device list. 2. Press [Options] and select “Check” or “Uncheck”.
To Turn Off Automatically “Connectivity” → “Bluetooth” → “Bluetooth Settings” → “Bluetooth Timeout” 1. Select the desired time. Your phone turns the function off automatically after the specified time. To Switch the Handsfree Settings You can switch modes of the handsfree kit between two modes; talking with the handsfree kit or talking with the phone. “Connectivity” → “Bluetooth” → “Bluetooth Settings” → “Handsfree Setting” 1. Select “Private mode” or “Handsfree mode”.
Network Settings (M 10-3) Selecting a Service Automatically Each time the power is turned on, your phone selects a service automatically. “Connectivity” → “Network Settings” → “Select Service” 1. Select “Auto”. Selecting a Service Manually “Connectivity” → “Network Settings” → “Select Service” 1. Select “GSM”. Selecting a Network Automatically Each time the power is turned on, your phone always tries to connect to the preferred network.
Flight Mode (M 10-4) When the Flight Mode is set to “On”, the phone cuts off the network connections and stops searching for available networks to connect. With this mode, you can play games or music even when you fly. “Connectivity” → “Flight Mode” 1. Select “On” or “Off”. Internet Settings (M 10-5) Note • In normal operations, you do not need to change the settings. • Internet settings have already been entered in your phone depending on your service provider.
Access Point Settings (M 10-5-4) “Connectivity” → “Internet Settings” → “Access Point Settings” → “Create New” “Access Point Name”: Access point name (Unique name) “APN”: APN setting “Authentication Type”: Authentication type (“NONE”, “PAP” or “CHAP”) “User Name”: User name for access point “Password”: Password for access point “DNS”: DNS (Domain Name System) “Linger Time”: Linger Time (1-99999 sec.
Making a Backup File on the Memory Card “Connectivity” → “Memory Card” → “Backup/Restore” → “Backup” 1. Enter your handset code. The default handset code is “9999”. For details on changing the handset code, see “Changing the Handset Code” on page 98. 2. Select the desired item to backup or “Select All” to backup all files. Formatting Memory Card (M 10-6-2) “Connectivity” → “Memory Card” → “Format Card” 1. Enter your handset code. The default handset code is “9999”.
Connecting 703SH to Your PC You can use the following functions by connecting the 703SH to your PC using an Infrared port, a USB port* or Bluetooth wireless technology port: • 3G/GSM modem • Handset Manager for 703SH * Requires an optional USB data cable XN-1DC30 for USB port connection.
Handset Manager You can transmit the following items between your phone and your PC, and can use Contacts List entries on your PC: • My Items files (pictures/sounds/video clips/Other Documents data) • Contacts List entries • Schedule entries For details on software support, refer to the following site: http://www.sharp-mobile.com Infrared Communication • Infrared ports need to be aligned with each other. • Infrared ports need to be placed within 20 cm of each other and within a 30° angle.
Troubleshooting Problem Problem Solution • Make sure the battery is properly inserted and charged. • Make sure you have entered the correct code (4 to 8 digits). • Your SIM/USIM card/protected PIN code or PIN2 code is functions will become locked after rejected. three unsuccessful attempts. • Contact your SIM/USIM provider if you do not have the correct PIN code. • Enter the PUK code (8 digits) provided by your service provider (if supported).
Problem Cannot access network service. Cannot send or receive text message. Cannot connect to Multimedia Messaging Service provider. Limited memory available. Call is terminated unexpectedly. No entries are displayed in the Contacts List. Solution • Check where your account has been registered and where the service is available. • Make sure you are correctly subscribed for the Short Message Service, that the network supports this service, and that the centre number is set up correctly.
Safety Precautions and Conditions of Use Your phone conforms to international regulations insofar as it is used under normal conditions and in accordance with the following instructions. CONDITIONS OF USE Electromagnetic waves • Do not switch on your phone aboard an aircraft (as your phone may interfere with the aircraft’s electronic systems). Current legislation forbids this use and legal action can be taken against the user. • Do not switch on your phone in a hospital, except in designated areas.
• Network configuration and phone usage will affect talk-time and standby time. Using the games or camera will hasten battery consumption. • When the battery charging alert is displayed on the screen, charge the battery as soon as possible. If you continue using your phone ignoring the alert, the phone may cease to function, and all data and settings you have stored may be lost at any moment. • Before removing the battery from the phone, make sure the phone is switched off.
• Do not bend the memory card or subject it to violent impact. Keep it away from water and high temperatures. • SHARP holds no responsibility for the loss or damage of data contained on a memory card. • Keep all memory cards out of the reach of small children. Aerial Care • Do not cover the top of the phone (p. 8, No. 19) with your hand when in use as this may interfere with the performance of the built-in aerial.
ENVIRONMENT SAR • Keep your phone away from extreme heat. Do not leave it on the dashboard of a car or near a heater. Do not leave it in any place that is extremely damp or dusty. • Since this product is not waterproof, do not use it or store it where fluids such as water can splash onto it. Raindrops, water spray, juice, coffee, steam, perspiration, etc. will also cause malfunctions. Your mobile device is a radio transmitter and receiver.
The World Health Organization has stated that present scientific information does not indicate the need for any special precautions for the use of mobile devices. They note that if you want to reduce your exposure then you can do so by limiting the length of calls or using a ‘hands-free’ device to keep the mobile phone away from the head and body. The tests are carried out in accordance with international guidelines for testing.
2. In other Countries outside the EU If you wish to discard this product, please contact your local authorities and ask for the correct method of disposal. For Switzerland: Used electrical or electronic equipment can be returned free of charge to the dealer, even if you don’t purchase a new product. Further collection facilities are listed on the homepage of www.swico.ch or www.sens.ch. B. Information on Disposal for Business Users. 1.
Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model phone when tested for use at the ear is 0.820 W/kg and when worn on the body, as described in this user guide, is 0.801 W/kg.
Specifications and Optional Accessories Specifications Weight: Dimensions (W × H × D): Battery: Approximately 107 g (with battery) Approximately 47.3 × 98.5 × 23.4 mm (when closed, without protruding parts) Lithium-Ion, 3.
Index A Alarms 75 Area Info 52 B Battery 11 Battery Level Indicator 13 Bluetooth Wireless Function 101 C Calculator 77 Calendar 73 Call Costs 100 Call Log 99 Call Settings 91 Call Timers 99 Camera (photo/video) 37 Adjusting the Exposure 38 Common Shortcut Keys 40 Continuous Shoot 41 Recording Video Clips 38 Selecting the Picture or Video Quality 39 Selecting the Picture Size 40 Selecting the Recording Time and Size 42 Selecting the Shutter Sound 42 Switching between the Photo and Video Camera Modes 39
L Language Setting 91 M Master Reset 98 Memory Card 106 Messaging (SMS/MMS/Email) 43 Calling the Phone Number 47 Downloading 47 Email Settings 51 Forwarding 48 General Settings 49 Locking or Unlocking 48 MMS Settings 51 Sending a Message in the Drafts Box 46 Sending a Voice Clip Message or Video Clip Message 46 Sending with Postcard 48 SMS Settings 50 Storing the Phone Number 47 Using the Sending Options 45 Music Player 56 My Items 58 N Navigating Functions 18 Network Settings 104 Pictures 58 PIN Code
List of Menu Functions Menu No./Main Menu 1 2 122 Entertainment Vodafone live! 3 Music 4 Messaging Menu No.
Menu No./Main Menu 9 Call Log 10 Connectivity Menu No./Sub Menu1 1 2 3 4 5 6 7 1 2 3 4 5 6 All Calls Dialled Numbers Missed Calls Received Calls Call Timers Data Counter Call Costs** Bluetooth Infrared Network Settings Flight Mode Internet Settings Memory Card 1 2 3 4 5 6 7 8 9 Profiles Display Settings Sound Settings Date & Time Language Call Settings Video Call Settings Security Master Reset **Depends on SIM card contents.