Operating Instructions

158 Telephony
Call Costs
This function lets you check the charges for your calls.
Some networks do not support Charging Advice. Please
check with your service provider for availability.
Checking the Cost of the Last Call
“Telephony”
→ “Call Log” tab → “Call Costs” →
“Last Call”
Checking the Total Call Cost
“Telephony”
→ “Call Log” tab → “Call Costs” →
“All Calls”
Setting the Charge Rate
Set the charge rate to calculate the call cost and set the
maximum limit for call cost.
“Telephony”
→ “Call Log” tab → “Call Costs” →
“Cost Units” → “Set Units”
1. Enter your PIN2 code.
2. Enter a currency unit (up to 3 characters).
3. Enter a cost per unit.
To enter a decimal point, press P.
Setting the Charge Limit
This function is useful if you wish to make sure you do
not exceed a certain charge limit.
“Telephony”
→ “Call Log” tab → “Call Costs” →
“Max Cost”
→ “Set Limit”
1. Enter your PIN2 code.
2. Enter a value.
Checking the Residual Credit
“Telephony”
→ “Call Log” tab → “Call Costs” →
“Residual Credit”
Resetting All Call Costs
“Telephony”
→ “Call Log” tab → “Call Costs” →
“Clear Costs”
1. Enter your PIN2 code.
Data Counter
You can confirm the number of bytes used in the 3G
(UMTS) and GSM transmission.
“Telephony”
→ “Call Log” tab → “Data Counter”
1. Select from “Last Data” or “All Data”.
Resetting All Data Counter
“Telephony”
→ “Call Log” tab → “Data Counter” →
“Clear Counter”
(M 9-6)
(M 9-6-1)
(M 9-6-2)
(M 9-6-5)
(M 9-6-6)
(M 9-6-3)
(M 9-6-4)
(M 9-7)
(M 9-7-3)