Operation Manual
Table Of Contents
- IMPORTANT INFORMATION
- DEAR SHARP CUSTOMER
- SAFETY PRECAUTIONS
- TIPS AND SAFETY INSTRUCTIONS
- MOUNTING PRECAUTIONS
- Supplied Components
- Part Names
- Connecting Peripheral Equipment
- Connecting the Power Cord
- Binding Cables
- Turning Power On/Off
- Menu Items
- Initialization (Reset)/Functional Restriction Setting (FUNCTION)
- Controlling the Monitor with a computer
- Troubleshooting
- Specifications
23
E
n
MONITOR
PORTRAIT/LANDSCAPE INSTALL
LANDSCAPE ......Landscape orientation
PORTRAIT .........Portrait orientation
VIDEO ROTATION
If video is upside down when the monitor is installed in portrait orientation, you can rotate the video 180 degrees.
Interlaced signals may not be displayed properly.
OSD H-POSITION
Adjusts the horizontal display position of menu screen.
OSD V-POSITION
Adjusts the vertical display position of menu screen.
OPERATION MODE
MODE1 is the recommended setting and conforms to the “Normal Configuration” as defined in the EcoDesign Regulation (2019/2021).
MODE1 ...... POWER MANAGEMENT setting can not be changed. If there is no signal for approx. 5 minutes, this monitor
automatically enters standby mode.
OFF IF NO SIGNAL is set to ON.
This setting cannot be changed.
MODE2 ...... OFF IF NO SIGNAL, and POWER MANAGEMENT can be changed.
LUMINANCE DROP ALERT
Automatically notifies that the backlight luminance is dropping by blinking the power LED in orange.
This function is available only if DYNAMIC RANGE EXPAND is set to MODE3.
CALIBRATION NOTIFICATION
Notifies that the set period has passed since the last calibration when the monitor is turned on.
Even if period is set, notification will not be made if date and time is not set.
n
OTHERS
POWER MANAGEMENT
POWER MANAGEMENT determines whether or not to switch modes from no signal to the input signal waiting state.
OFF IF NO SIGNAL
When POWER MANAGEMENT is ON and OFF IF NO SIGNAL is ON, the monitor enters standby state when there is no signal.
When POWER MANAGEMENT is ON and OFF IF NO SIGNAL is OFF, the monitor enters input signal waiting state when there
is no signal.
CONNECT AUTO INPUT SELECT
Sets whether the input mode of the input terminal automatically changes when a video signal is input into that terminal.
(With some input signals, the input mode may not change.)
NO SIGNAL AUTO INPUT SEL.
Specify whether to change inputs automatically. When ON is selected and no signal is present in the selected input mode, the
monitor automatically changes the selected mode to another mode where a video signal is present.
AUTO INPUT SELECT PRIORITY
Sets the order of input terminal priority for NO SIGNAL AUTO INPUT SEL..
Input mode does not change automatically for terminals without a priority setting.
The lower the number, the higher the priority.
CUSTOM BUTTON (See page 10.)
Displays or resets the menu items assigned to the custom buttons.
INPUT
Switches the input mode.
LOGO SCREEN
Sets whether or not to display the logo screen.
VOLUME
Adjusts the volume.
MUTE AUDIO
Temporarily mutes the audio.
INPUT SIGNAL INFORMATION
Input signal information in current input mode can be checked. Information is displayed according to the signal information from
the external device. It may differ depending on input mode.
MONITOR INFORMATION
Displays monitor information.
Menu Items