Operation Manual

24
E
TIPS
• Some items in the PICTURE menu may not be adjustable depending on settings in AUTO HDR DETECTION, COLOR
MODE, and LUMINANCE PRIORITY.
• When WHITE BALANCE is THRU, PRESET, USER, and COPY TO USER cannot be configured.
• When displaying the color pattern, it is possible to adjust certain items of the PICTURE menu. Non-adjustable items cannot
be selected.
• When COLOR MODE is USER1, USER2, or THRU, AUTO HDR DETECTION does not operate.
• When COLOR MODE is set to THRU, following items cannot be configured: AUTO HDR DETECTION, LUMINANCE
PRIORITY, CONTRAST, BLACK LEVEL, HUE, CHROMA, SHARPNESS, WHITE BALANCE, PRESET, USER, COPY TO
USER, COLOR GAMUT, GAMMA(EOTF), HLG SYSTEM GAMMA, 6-AXIS - HUE, 6-AXIS - CHROMA, 6-AXIS - VALUE,
CUSTOM SETTING, DYNAMIC RANGE EXPAND, USER SETTING NAME, LUMINANCE CLIPPING, GAMUT WARNING,
MARKER, PEAKING, FALSE COLOR, MONO/BLUE ONLY.
• When INPUT MODE is HDMI3 or DisplayPort, AUTO HDR DETECTION cannot be configured.
• When HDR is OFF, AUTO HDR DETECTION cannot be configured.
• When LUMINANCE PRIORITY is ON, following items cannot be configured: LUMINANCE, CONTRAST, BLACK LEVEL,
WHITE BALANCE, PRESET, USER, COPY TO USER, UNIFORMITY, DYNAMIC RANGE EXPAND, PEAKING.
• When LUMINANCE PRIORITY is ON, MONO/BLUE ONLY cannot be set to BLUE ONLY.
• When WHITE BALANCE is USER or THRU, PRESET and COPY TO USER cannot be configured.
• When WHITE BALANCE is PRESET or THRU, USER cannot be configured.
• When WHITE BALANCE is THRU, MONO/BLUE ONLY cannot be set to BLUE ONLY.
• When COLOR MODE is BT.2020, BT.709, DCI-P3, Adobe RGB, sRGB, or EBU, GAMMA(EOTF) cannot be set to HYBRID
LOG GAMMA(HLG) or SMPTE ST 2084(PQ).
• When CUSTOM SETTING is ON, following items cannot be configured: LUMINANCE, WHITE BALANCE, PRESET, USER,
COPY TO USER, COLOR GAMUT, GAMMA(EOTF).
• When LUMINANCE CLIPPING is ON or TONE-MAPPING, COLOR GAMUT and GAMMA(EOTF) cannot be configured.
• When LUMINANCE WARNING is ON, following items cannot be configured: CONTRAST, BLACK LEVEL, HUE, CHROMA,
6-AXIS - HUE, 6-AXIS - CHROMA, 6-AXIS - VALUE.
• When GAMUT WARNING is ON or CLIP, following items cannot be configured: CONTRAST, BLACK LEVEL, HUE,
CHROMA, COLOR GAMUT, GAMMA(EOTF), HLG SYSTEM GAMMA, 6-AXIS - HUE, 6-AXIS - CHROMA, 6-AXIS - VALUE.
• When PEAKING is ON, LUMINANCE PRIORITY and DYNAMIC RANGE EXPAND cannot be configured.
• When FALSE COLOR is ON, following items cannot be configured: CONTRAST, BLACK LEVEL, HUE, CHROMA, COLOR
GAMUT, GAMMA(EOTF), HLG SYSTEM GAMMA, 6-AXIS - HUE, 6-AXIS - CHROMA, 6-AXIS - VALUE.
• When DYNAMIC RANGE EXPAND is MODE3, HLG SYSTEM GAMMA does not operate properly.
• When MONO/BLUE ONLY is BLUE ONLY, following items cannot be configured: LUMINANCE PRIORITY, WHITE BALANCE,
PRESET, USER, COPY TO USER.
• When MONO/BLUE ONLY is MONO, CHROMA cannot be configured.
• The following items cannot be configured together: LUMINANCE CLIPPING, GAMUT WARNING, MARKER, PEAKING,
FALSE COLOR, MONO/BLUE ONLY.
• When COLOR MODE is USER1 or USER2, CUSTOM SETTING is ON, and LUT (.cube file)* is 1D* only, 3D* only, or both
1D* and 3D*, MONO/BLUE ONLY cannot be configured.
• When COLOR MODE is USER1 or USER2, CUSTOM SETTING is ON, and LUT (.cube file)* is 3D* only or both 1D* and
3D*, following items cannot be configured: CONTRAST, BLACK LEVEL, HUE, CHROMA, 6-AXIS - HUE, 6-AXIS - CHROMA,
6-AXIS - VALUE.
• When COLOR MODE is USER1 or USER2, CUSTOM SETTING is ON, Gamma* is HLG* or PQ*, and LUT (.cube file)* is 1D*
only, following items cannot be configured: CONTRAST, BLACK LEVEL, HUE, CHROMA, 6-AXIS - HUE, 6-AXIS - CHROMA,
6-AXIS - VALUE.
* They are setting items for Display Calibration Utility.
Caution
• When configurable condition and unconfigurable condition are met at the same time, the unconfigurable condition is
prioritized.
Menu Items