Operation Manual
Table Of Contents
- IMPORTANT INFORMATION
- DEAR SHARP CUSTOMER
- SAFETY PRECAUTIONS
- TIPS AND SAFETY INSTRUCTIONS
- MOUNTING PRECAUTIONS
- Supplied Components
- Part Names
- Connecting Peripheral Equipment
- Connecting the Power Cord
- Binding Cables
- Turning Power On/Off
- Menu Items
- Initialization (Reset)/Functional Restriction Setting (FUNCTION)
- Controlling the Monitor with a computer
- Troubleshooting
- Specifications
33
E
n
Dimensional Drawings
Note that the values shown are approximate values.
3-15/16
[100]
3-15/16
[100]
3-15/16
[100]
29-9/16 [751]
3-15/16
[100]
Unit: inch [mm]
3-7/8 [99]
10-1/4 [260]
2-1/16
[52]
18-7/16 [469]
2-13/16
[71]
1 [26]
1 [26]
1-15/16[49]
1 [26]
Screw holes for mounting brackets
12-3/4 [324]
• To attach a VESA-compliant mounting bracket, use M6 screws that are 5/16 inch (8 mm) to 3/8 inch (10 mm) longer than the
thickness of the mounting bracket.
Screws (M6)
Mounting bracket
Monitor mounting
5/16 - 3/8 inch (8 - 10 mm)
• Be sure to use a wall-mount bracket designed or designated for mounting the monitor.
• This monitor and bracket must be installed on a wall which can endure at least 4 times or more the weight of the monitor.
Install by the most suitable method for the material and the structure.
• Do not use an impact driver.
• Do not use any screw holes other than those for mounting brackets, located on the rear of the monitor, for installation.
Specifications