Operation Manual
Table Of Contents
- IMPORTANT INFORMATION
- DEAR SHARP CUSTOMER
- SAFETY PRECAUTIONS
- TIPS AND SAFETY INSTRUCTIONS
- MOUNTING PRECAUTIONS
- Supplied Components
- Part Names
- Connecting Peripheral Equipment
- Connecting the Power Cord
- Binding Cables
- Turning Power On/Off
- Menu Items
- Initialization (Reset)/Functional Restriction Setting (FUNCTION)
- Controlling the Monitor with a computer
- Troubleshooting
- Specifications
7
E
MOUNTING PRECAUTIONS
• This product is for use indoors.
• When moving the monitor, be sure to hold its sides or
bottom. Do not hold the LCD panel or buttons. This may
cause product damage, failure, or injury. This may cause
product damage, failure, or injury.
• Use the monitor with the surface perpendicular to a level
surface.
• This monitor should be used at an ambient temperature
between 41°F (5°C) and 95°F (35°C).
Provide enough space around the monitor to prevent heat
from accumulating inside.
For the monitor in landscape orientation
7-7/8 [200]
Unit: inch [mm]
3-1/4 [82]
2-13/16 [71]
2
[50]
2
[50]
For the monitor in portrait orientation
1-7/16 [36]
7-7/8 [200]
6 [153]
Unit: inch [mm]
Power LED
2
[50]
2
[50]
• Temperature condition may change when using the monitor
together with the optional equipments recommended by
SHARP. In such cases, please check the temperature
condition specified by the optional equipments.
• Do not block any ventilation openings. If the temperature
inside the monitor rises, this could lead to a malfunction.
• Do not place the monitor on a device which generates heat.
• To install the monitor in portrait orientation, a mounting
bracket compliant with VESA specifications is required.
A stand supplied with this product cannot be used for
installation in portrait orientation.
• Adhere to the following when installing the monitor in its
portrait orientation. Failing to adhere to the following may
cause malfunctions.
- Install the monitor such that the power LED is located on
the bottom side.
- Set the PORTRAIT/LANDSCAPE INSTALL in the
MONITOR menu to PORTRAIT. (See page 23.)
- Be sure to clamp the power cord (supplied) onto the cable
clamp attachment using the supplied cable clamp. When
clamping the power cord, take care not to stress the
terminal of the power cord. Do not bend the power cord
excessively.
Power cord
(Supplied)
Cable clamp
attachment
Cable clamp
• After mounting, please carefully ensure the monitor is
secure, and not able to come loose from the wall or mount.