Operation Manual
Table Of Contents
- 000.pdf
- 001.pdf
- 002.pdf
- 003.pdf
- 004.pdf
- 005.pdf
- 006.pdf
- 007.pdf
- 008.pdf
- 009.pdf
- 010.pdf
- 011.pdf
- 012.pdf
- 013.pdf
- 014.pdf
- 015.pdf
- 016.pdf
- 017.pdf
- 018.pdf
- 019.pdf
- 020.pdf
- 021.pdf
- 022.pdf
- 023.pdf
- 024.pdf
- 025.pdf
- 026.pdf
- 027.pdf
- 028.pdf
- 029.pdf
- 030.pdf
- 031.pdf
- 032.pdf
- 033.pdf
- 034.pdf
- 035.pdf
- 036.pdf
- 037.pdf
- 038.pdf
- 039.pdf
- 040.pdf
- 041.pdf
- 042.pdf
- 043.pdf
- 044.pdf
- 045.pdf
- 046.pdf
- 047.pdf
- 048.pdf
- 049.pdf
- 050.pdf
- 051.pdf
- 052.pdf
- 053.pdf
- 054.pdf
- 055.pdf
- 056.pdf
- 057.pdf
- 058.pdf
- 059.pdf
- 060.pdf
- 061.pdf
- 062.pdf
- 063.pdf
- 064.pdf
- 065.pdf
- 066.pdf
- 067.pdf
- 068.pdf
- 069.pdf
- 070.pdf
- 071.pdf
- 072.pdf
- 073.pdf
- 074.pdf
- 075.pdf
- 076.pdf
- 077.pdf
- 078.pdf
- 079.pdf
- 080.pdf
- 081.pdf
- 082.pdf
- 083.pdf
- 084.pdf
- 085.pdf
- 086.pdf
- 087.pdf
- 088.pdf
- 089.pdf
- 090.pdf
- 091.pdf
- 092.pdf
- 093.pdf
- 094.pdf
- 095.pdf
- 096.pdf
- 097.pdf
- 098.pdf
- 099.pdf
- 100.pdf
- 101..pdf
- 102.pdf
- 103.pdf
- 104.pdf
- 105.pdf
- 106.pdf
- 107.pdf
- 108.pdf
- 109.pdf
- 110.pdf
- 111.pdf
- 112.pdf
- 113.pdf
- 114.pdf
- 115.pdf
- 116.pdf
- 117.pdf
- 118.pdf
- 119.pdf
- 120.pdf
- 121.pdf
- 122.pdf
- 123.pdf
- 124.pdf
- 125.pdf
- 126.pdf
- 127.pdf
- 128.pdf
- 129.pdf
- 130.pdf
- 131.pdf
- 132.pdf
- 133.pdf
- 134.pdf
- 135.pdf
- 136.pdf
- 137.pdf
- 138.pdf
- 139.pdf
- 140.pdf
- 141.pdf
- 142.pdf
- 143.pdf
1/24/2019 Sharp operation manual
file:///Y:/11_IM%20GROUP/Oversea%20Group/SHARP%20JAPAN/2018/JC180418_8M-C80AX1E_html/Source/Combine%20HTML/html_E1/index.html?page=1-01.html 1/1
Contents
1. Part Names
2. Basic Operation
3. Menu Operation
4. USB Media
5. AQUOS LINK and Other
Devices
6. Operating the Monitor
Using a PC (IP control)
7. Troubleshooting
8. Specifications, etc.
You can select an OSD language from among 8
languages.
English (UK) >>
Français >>
Deutsch >>
Italiano >>
Русский >>
Español >>
Polski >>
English (US) >>
Ver. 1.00
＞
＜
AQUOS LINK and Other Devices
Connecting PC
Using as a monitor for PC
Displaying the PC screen / selecting the screen size
1. Turn on PC
2. Press INPUT to display the input change menu, and after selecting the input to which the PC has been
connected with the / button, press ENTER
The PC screen will be displayed.
3. Press MENU to display the Menu, select "Setup" with the / / / and press ENTER
4. Press / / / to select " (Option)" - "Option for view", and press ENTER
5. Select "Wide mode", and then press ENTER
6. Select the desired screen size from the screen size selection menu
When you need to adjust the screen, refer to the following.
Adjusting the screen of PC connected to INPUT1 to 4
Press MENU to display the Menu, press / / / and ENTER to select "Setup" - " (Option)" - "Screen effect"
- "Position" to configure the settings.
(page 3-41)
5-26