Operation Manual
Table Of Contents
- 000.pdf
- 001.pdf
- 002.pdf
- 003.pdf
- 004.pdf
- 005.pdf
- 006.pdf
- 007.pdf
- 008.pdf
- 009.pdf
- 010.pdf
- 011.pdf
- 012.pdf
- 013.pdf
- 014.pdf
- 015.pdf
- 016.pdf
- 017.pdf
- 018.pdf
- 019.pdf
- 020.pdf
- 021.pdf
- 022.pdf
- 023.pdf
- 024.pdf
- 025.pdf
- 026.pdf
- 027.pdf
- 028.pdf
- 029.pdf
- 030.pdf
- 031.pdf
- 032.pdf
- 033.pdf
- 034.pdf
- 035.pdf
- 036.pdf
- 037.pdf
- 038.pdf
- 039.pdf
- 040.pdf
- 041.pdf
- 042.pdf
- 043.pdf
- 044.pdf
- 045.pdf
- 046.pdf
- 047.pdf
- 048.pdf
- 049.pdf
- 050.pdf
- 051.pdf
- 052.pdf
- 053.pdf
- 054.pdf
- 055.pdf
- 056.pdf
- 057.pdf
- 058.pdf
- 059.pdf
- 060.pdf
- 061.pdf
- 062.pdf
- 063.pdf
- 064.pdf
- 065.pdf
- 066.pdf
- 067.pdf
- 068.pdf
- 069.pdf
- 070.pdf
- 071.pdf
- 072.pdf
- 073.pdf
- 074.pdf
- 075.pdf
- 076.pdf
- 077.pdf
- 078.pdf
- 079.pdf
- 080.pdf
- 081.pdf
- 082.pdf
- 083.pdf
- 084.pdf
- 085.pdf
- 086.pdf
- 087.pdf
- 088.pdf
- 089.pdf
- 090.pdf
- 091.pdf
- 092.pdf
- 093.pdf
- 094.pdf
- 095.pdf
- 096.pdf
- 097.pdf
- 098.pdf
- 099.pdf
- 100.pdf
- 101..pdf
- 102.pdf
- 103.pdf
- 104.pdf
- 105.pdf
- 106.pdf
- 107.pdf
- 108.pdf
- 109.pdf
- 110.pdf
- 111.pdf
- 112.pdf
- 113.pdf
- 114.pdf
- 115.pdf
- 116.pdf
- 117.pdf
- 118.pdf
- 119.pdf
- 120.pdf
- 121.pdf
- 122.pdf
- 123.pdf
- 124.pdf
- 125.pdf
- 126.pdf
- 127.pdf
- 128.pdf
- 129.pdf
- 130.pdf
- 131.pdf
- 132.pdf
- 133.pdf
- 134.pdf
- 135.pdf
- 136.pdf
- 137.pdf
- 138.pdf
- 139.pdf
- 140.pdf
- 141.pdf
- 142.pdf
- 143.pdf
1/24/2019 Sharp operation manual
file:///Y:/11_IM%20GROUP/Oversea%20Group/SHARP%20JAPAN/2018/JC180418_8M-C80AX1E_html/Source/Combine%20HTML/html_E1/index.html?page=1-01.html 1/1
Contents
1. Part Names
2. Basic Operation
3. Menu Operation
4. USB Media
5. AQUOS LINK and Other
Devices
6. Operating the Monitor
Using a PC (IP control)
7. Troubleshooting
8. Specifications, etc.
You can select an OSD language from among 8
languages.
English (UK) >>
Français >>
Deutsch >>
Italiano >>
Русский >>
Español >>
Polski >>
English (US) >>
Ver. 1.00
＞
＜
AQUOS LINK and Other Devices
Connecting PC
When the monitor is connected to a PC with DVI output terminal (digital connection)
Be sure to use the supplied conversion cable. When using any conversion cable other than the supplied one, the Monitor may not operate properly, or breakages may occur.
A commercially available DVI / HDMI conversion cable and an audio cable are required.
Use an audio cable that is compatible with the terminal of PC.
The HDMI terminal of the Monitor, and the PC DVI terminal with a conversion cable, the PC screen may not be displayed properly or completely. This is because the cable
does not sufficiently meet HDMI standards.
"This input signal is not supported" message will be displayed when an unsupported signal is input. In such situation, refer to the operation manual of the connected PC and
change to the supported signal.
After switching to INPUT 1, select "Setup" - " (Option)" -"Terminal setting" - "INPUT1 audio select" from the Menu, and then select "Analogue audio input".
5-27