Operation Manual
Table Of Contents
- 000.pdf
- 001.pdf
- 002.pdf
- 003.pdf
- 004.pdf
- 005.pdf
- 006.pdf
- 007.pdf
- 008.pdf
- 009.pdf
- 010.pdf
- 011.pdf
- 012.pdf
- 013.pdf
- 014.pdf
- 015.pdf
- 016.pdf
- 017.pdf
- 018.pdf
- 019.pdf
- 020.pdf
- 021.pdf
- 022.pdf
- 023.pdf
- 024.pdf
- 025.pdf
- 026.pdf
- 027.pdf
- 028.pdf
- 029.pdf
- 030.pdf
- 031.pdf
- 032.pdf
- 033.pdf
- 034.pdf
- 035.pdf
- 036.pdf
- 037.pdf
- 038.pdf
- 039.pdf
- 040.pdf
- 041.pdf
- 042.pdf
- 043.pdf
- 044.pdf
- 045.pdf
- 046.pdf
- 047.pdf
- 048.pdf
- 049.pdf
- 050.pdf
- 051.pdf
- 052.pdf
- 053.pdf
- 054.pdf
- 055.pdf
- 056.pdf
- 057.pdf
- 058.pdf
- 059.pdf
- 060.pdf
- 061.pdf
- 062.pdf
- 063.pdf
- 064.pdf
- 065.pdf
- 066.pdf
- 067.pdf
- 068.pdf
- 069.pdf
- 070.pdf
- 071.pdf
- 072.pdf
- 073.pdf
- 074.pdf
- 075.pdf
- 076.pdf
- 077.pdf
- 078.pdf
- 079.pdf
- 080.pdf
- 081.pdf
- 082.pdf
- 083.pdf
- 084.pdf
- 085.pdf
- 086.pdf
- 087.pdf
- 088.pdf
- 089.pdf
- 090.pdf
- 091.pdf
- 092.pdf
- 093.pdf
- 094.pdf
- 095.pdf
- 096.pdf
- 097.pdf
- 098.pdf
- 099.pdf
- 100.pdf
- 101..pdf
- 102.pdf
- 103.pdf
- 104.pdf
- 105.pdf
- 106.pdf
- 107.pdf
- 108.pdf
- 109.pdf
- 110.pdf
- 111.pdf
- 112.pdf
- 113.pdf
- 114.pdf
- 115.pdf
- 116.pdf
- 117.pdf
- 118.pdf
- 119.pdf
- 120.pdf
- 121.pdf
- 122.pdf
- 123.pdf
- 124.pdf
- 125.pdf
- 126.pdf
- 127.pdf
- 128.pdf
- 129.pdf
- 130.pdf
- 131.pdf
- 132.pdf
- 133.pdf
- 134.pdf
- 135.pdf
- 136.pdf
- 137.pdf
- 138.pdf
- 139.pdf
- 140.pdf
- 141.pdf
- 142.pdf
- 143.pdf
1/24/2019 Sharp operation manual
file:///Y:/11_IM%20GROUP/Oversea%20Group/SHARP%20JAPAN/2018/JC180418_8M-C80AX1E_html/Source/Combine%20HTML/html_E1/index.html?page=1-01.html 1/1
Contents
1. Part Names
2. Basic Operation
3. Menu Operation
4. USB Media
5. AQUOS LINK and Other
Devices
6. Operating the Monitor
Using a PC (IP control)
7. Troubleshooting
8. Specifications, etc.
You can select an OSD language from among 8
languages.
English (UK) >>
Français >>
Deutsch >>
Italiano >>
Русский >>
Español >>
Polski >>
English (US) >>
Ver. 1.00
＞
＜
AQUOS LINK and Other Devices
Connecting PC
When the monitor is connected to a PC with analog RGB output terminal (digital connection)
Be sure to use the supplied conversion cable.When using any conversion cable other than the supplied one, the Monitor may not operate properly, or a part may be broken.
A commercially available D-sub cable and an audio cable are required.
Use an audio cable that is compatible with the PC terminal.
After switching to INPUT 6, select "Setup" - " (Option)" -"Terminal setting" - "INPUT6 audio select" from the Menu, and then select "Analogue audio input".
5-29