Operation Manual
Table Of Contents
- 000.pdf
- 001.pdf
- 002.pdf
- 003.pdf
- 004.pdf
- 005.pdf
- 006.pdf
- 007.pdf
- 008.pdf
- 009.pdf
- 010.pdf
- 011.pdf
- 012.pdf
- 013.pdf
- 014.pdf
- 015.pdf
- 016.pdf
- 017.pdf
- 018.pdf
- 019.pdf
- 020.pdf
- 021.pdf
- 022.pdf
- 023.pdf
- 024.pdf
- 025.pdf
- 026.pdf
- 027.pdf
- 028.pdf
- 029.pdf
- 030.pdf
- 031.pdf
- 032.pdf
- 033.pdf
- 034.pdf
- 035.pdf
- 036.pdf
- 037.pdf
- 038.pdf
- 039.pdf
- 040.pdf
- 041.pdf
- 042.pdf
- 043.pdf
- 044.pdf
- 045.pdf
- 046.pdf
- 047.pdf
- 048.pdf
- 049.pdf
- 050.pdf
- 051.pdf
- 052.pdf
- 053.pdf
- 054.pdf
- 055.pdf
- 056.pdf
- 057.pdf
- 058.pdf
- 059.pdf
- 060.pdf
- 061.pdf
- 062.pdf
- 063.pdf
- 064.pdf
- 065.pdf
- 066.pdf
- 067.pdf
- 068.pdf
- 069.pdf
- 070.pdf
- 071.pdf
- 072.pdf
- 073.pdf
- 074.pdf
- 075.pdf
- 076.pdf
- 077.pdf
- 078.pdf
- 079.pdf
- 080.pdf
- 081.pdf
- 082.pdf
- 083.pdf
- 084.pdf
- 085.pdf
- 086.pdf
- 087.pdf
- 088.pdf
- 089.pdf
- 090.pdf
- 091.pdf
- 092.pdf
- 093.pdf
- 094.pdf
- 095.pdf
- 096.pdf
- 097.pdf
- 098.pdf
- 099.pdf
- 100.pdf
- 101..pdf
- 102.pdf
- 103.pdf
- 104.pdf
- 105.pdf
- 106.pdf
- 107.pdf
- 108.pdf
- 109.pdf
- 110.pdf
- 111.pdf
- 112.pdf
- 113.pdf
- 114.pdf
- 115.pdf
- 116.pdf
- 117.pdf
- 118.pdf
- 119.pdf
- 120.pdf
- 121.pdf
- 122.pdf
- 123.pdf
- 124.pdf
- 125.pdf
- 126.pdf
- 127.pdf
- 128.pdf
- 129.pdf
- 130.pdf
- 131.pdf
- 132.pdf
- 133.pdf
- 134.pdf
- 135.pdf
- 136.pdf
- 137.pdf
- 138.pdf
- 139.pdf
- 140.pdf
- 141.pdf
- 142.pdf
- 143.pdf
1/24/2019 Sharp operation manual
file:///Y:/11_IM%20GROUP/Oversea%20Group/SHARP%20JAPAN/2018/JC180418_8M-C80AX1E_html/Source/Combine%20HTML/html_E1/index.html?page=1-01.html 1/1
Contents
1. Part Names
2. Basic Operation
3. Menu Operation
4. USB Media
5. AQUOS LINK and Other
Devices
6. Operating the Monitor
Using a PC (IP control)
7. Troubleshooting
8. Specifications, etc.
You can select an OSD language from among 8
languages.
English (UK) >>
Français >>
Deutsch >>
Italiano >>
Русский >>
Español >>
Polski >>
English (US) >>
Ver. 1.00
＞
＜
AQUOS LINK and Other Devices
Connecting 8K output compatible Device
Supported format
7680 × 4320 (24Hz, 25Hz, 30Hz, 50Hz, 60Hz)
How to switch to 8K video input
Press INPUT on the remote control. During the display of the input change menu, use the / to select "INPUT7",
and press ENTER.
Channel number to be displayed during use of 8K video input
When a synchronizing 8K signal is input to INPUT7 (A to D), the video information is displayed as "4320p".
NOTE
"Out of range" message will be displayed if an unsupported signal is input. In such situation, refer to the
operation manual of the connected device and change to the supported signal.
Video will not be displayed properly if input signals are not synchronized.
5-3