Operation Manual
Table Of Contents
- 000.pdf
- 001.pdf
- 002.pdf
- 003.pdf
- 004.pdf
- 005.pdf
- 006.pdf
- 007.pdf
- 008.pdf
- 009.pdf
- 010.pdf
- 011.pdf
- 012.pdf
- 013.pdf
- 014.pdf
- 015.pdf
- 016.pdf
- 017.pdf
- 018.pdf
- 019.pdf
- 020.pdf
- 021.pdf
- 022.pdf
- 023.pdf
- 024.pdf
- 025.pdf
- 026.pdf
- 027.pdf
- 028.pdf
- 029.pdf
- 030.pdf
- 031.pdf
- 032.pdf
- 033.pdf
- 034.pdf
- 035.pdf
- 036.pdf
- 037.pdf
- 038.pdf
- 039.pdf
- 040.pdf
- 041.pdf
- 042.pdf
- 043.pdf
- 044.pdf
- 045.pdf
- 046.pdf
- 047.pdf
- 048.pdf
- 049.pdf
- 050.pdf
- 051.pdf
- 052.pdf
- 053.pdf
- 054.pdf
- 055.pdf
- 056.pdf
- 057.pdf
- 058.pdf
- 059.pdf
- 060.pdf
- 061.pdf
- 062.pdf
- 063.pdf
- 064.pdf
- 065.pdf
- 066.pdf
- 067.pdf
- 068.pdf
- 069.pdf
- 070.pdf
- 071.pdf
- 072.pdf
- 073.pdf
- 074.pdf
- 075.pdf
- 076.pdf
- 077.pdf
- 078.pdf
- 079.pdf
- 080.pdf
- 081.pdf
- 082.pdf
- 083.pdf
- 084.pdf
- 085.pdf
- 086.pdf
- 087.pdf
- 088.pdf
- 089.pdf
- 090.pdf
- 091.pdf
- 092.pdf
- 093.pdf
- 094.pdf
- 095.pdf
- 096.pdf
- 097.pdf
- 098.pdf
- 099.pdf
- 100.pdf
- 101..pdf
- 102.pdf
- 103.pdf
- 104.pdf
- 105.pdf
- 106.pdf
- 107.pdf
- 108.pdf
- 109.pdf
- 110.pdf
- 111.pdf
- 112.pdf
- 113.pdf
- 114.pdf
- 115.pdf
- 116.pdf
- 117.pdf
- 118.pdf
- 119.pdf
- 120.pdf
- 121.pdf
- 122.pdf
- 123.pdf
- 124.pdf
- 125.pdf
- 126.pdf
- 127.pdf
- 128.pdf
- 129.pdf
- 130.pdf
- 131.pdf
- 132.pdf
- 133.pdf
- 134.pdf
- 135.pdf
- 136.pdf
- 137.pdf
- 138.pdf
- 139.pdf
- 140.pdf
- 141.pdf
- 142.pdf
- 143.pdf
1/24/2019 Sharp operation manual
file:///Y:/11_IM%20GROUP/Oversea%20Group/SHARP%20JAPAN/2018/JC180418_8M-C80AX1E_html/Source/Combine%20HTML/html_E1/index.html?page=1-01.html 1/1
Contents
1. Part Names
2. Basic Operation
3. Menu Operation
4. USB Media
5. AQUOS LINK and Other
Devices
6. Operating the Monitor
Using a PC (IP control)
7. Troubleshooting
8. Specifications, etc.
You can select an OSD language from among 8
languages.
English (UK) >>
Français >>
Deutsch >>
Italiano >>
Русский >>
Español >>
Polski >>
English (US) >>
Ver. 1.00
＞
＜
AQUOS LINK and Other Devices
Connecting 8K output compatible Device
Supported audio sound signals
Type: Linear PCM
Sampling frequency: 48kHz / 44.1kHz / 32kHz
How to change the input audio sound
Press INPUT on the remote control. During the display of the input change menu, press / to select "INPUT7",
and press ENTER. Press MENU, followed by / / / and ENTER to select "Setup" - " (Option)" - "Terminal
setting" - "INPUT7 audio select", then select input for audo sound.
NOTE
When "Audio input terminal" has been selected for "INPUT7 audio select", no sound will come out of the
Monitor if you connect between the Monitor and a typical HDMI compatible device using an HDMI cable instead of
an analog audio cable. (An analog audio cable needs to be connected)
To connect the Monitor to a HDMI compatible device using an HDMI cable alone, select the input to which the
device has been connected in "INPUT7 audio select".
5-4