Declaration of Conformity Hereby, Sharp Telecommunications of Europe Ltd, declares that this 902SH is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the original declaration of conformity can be found at the following Internet address: http://www.sharp-mobile.
Introduction Congratulations on your new 3G/UMTS 902SH phone. Useful Functions and Services Your phone offers you the following features: • Video calls. You can talk while viewing each other on respective screens. • A built-in digital camera for taking pictures and video clips. • A message function for reading and creating SMS messages. • MMS (Multimedia Messaging Services) for personalising your phone in various ways. • A WAP browser for accessing information on the mobile Internet. • Java™ applications.
Introduction • A schedule alarm for creating and sending schedule entries with alarm settings. • Video output. You can connect your phone to other devices, such as TVs or videos set to output, and display Java™ data, images, or video clips. • Barcode scanner. With the built-in digital camera, you can read texts and barcodes, and create QR codes. • Playback of the downloaded sound and video clip files. • SD memory card slot that expands connectivity with a PC using the memory card.
Introduction About This User Guide This user guide is carefully designed to help you learn about your phone’s features and operations quickly and effectively. NOTICE • We strongly recommend that you keep separate permanent written records of all important data. Data may be lost or altered in virtually any electronic memory product under certain circumstances.
Introduction • All the functions described in this user guide may not be supported by all networks. • We assume no responsibility for downloaded contents, information, etc. from the network. • Occasionally, a few black or bright pixels may appear on the screen. Please note that this will not have any impact on any of the features or on performance. Copyright According to copyright laws, the reproduction, alteration and use of material which is protected by copyright (music, pictures, etc.
Introduction Powered by JBlend™ Copyright 1997-2004 Aplix Corporation. All rights reserved. JBlend and all JBlend-based trademarks and logos are trademarks or registered trademarks of Aplix Corporation in Japan and other countries. Powered by Mascot Capsule®/Micro3D Edition™ Mascot Capsule® is a registered trademark of HI Corporation ©2002-2004 HI Corporation. All Rights Reserved.
Introduction T9 Text Input is licensed under one or more of the following: U.S. Pat. Nos. 5,818,437, 5,953,541, 5,187,480, 5,945,928, and 6,011,554; Australian Pat. No. 727539; Canadian Pat. No. 1,331,057; United Kingdom Pat. No. 2238414B; Hong Kong Standard Pat. No. HK0940329; Republic of Singapore Pat. No. 51383; Euro. Pat. No. 0 842 463 (96927260.8) DE/DK, FI, FR, IT, NL,PT.ES,SE,GB; Republic of Korea Pat. Nos. KR201211B1 and KR226206B1; and additional patents are pending worldwide.
Introduction Contains Macromedia® Flash™ technology by Macromedia, Inc. Copyright © 1995-2004 Macromedia, Inc. All rights reserved. Macromedia, Flash, Macromedia Flash, and Macromedia Flash Lite are trademarks or registered trademarks of Macromedia, Inc. in the United States and other countries.
Introduction CP8 PATENT 8
Introduction This product is licensed under the MPEG-4 Visual Patent Portfolio License for the personal and non-commercial use of a consumer to (i) encode video in compliance with the MPEG-4 Video Standard (“MPEG-4 Video”) and/or (ii) decode MPEG-4 Video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained from a licensed video provider. No license is granted or implied for any other use. Additional information may be obtained from MPEG LA. See http://www.
Contents Introduction .............................................................. 1 Your Phone ............................................................. 13 Getting Started ....................................................... 14 Inserting the SIM Card and the Battery .............. 20 Removing the SIM Card and the Battery ............ 21 Charging the Battery ........................................ 22 Inserting the Memory Card ............................... 25 Removing the Memory Card ............
Contents Receiving a Contacts List Entry ..........................69 Camera ....................................................................70 Taking Pictures ................................................70 Recording Video Clips .......................................80 Messages ................................................................87 MMS ...............................................................87 SMS ................................................................87 Email .........
Contents Time & Date .................................................. 185 Language Setting ........................................... 187 Call Settings .................................................. 188 Video Call Settings ......................................... 195 Security ........................................................ 197 Memory Settings ........................................... 200 Master Reset ................................................. 201 Call Log .........................
Your Phone Please check the following carefully.
Getting Started 1. Earpiece 2. Navigation Keys (Arrow Keys): abcd Moves cursor to highlight a menu item, etc. 14 Up/Down arrow keys: Displays the Contacts List when pressed during stand-by. Left arrow key: Displays the message inbox when pressed during stand-by. Right arrow key: Displays the monthly calendar when pressed during stand-by. 1 11 2 3. Centre Key: Displays Main menu when pressed during stand-by, then executes a function highlighted. 3 4. Left Soft Key: A 5. Send/Redial Key: D 6.
Getting Started 9. Microphone 10. Sub Camera (Internal Camera) 11. Main Display 12. Microphone (for the viewer style of the display) 13. Right Soft Key: Executes the function at the bottom right of the screen. Shortcut to “Vodafone live!” by opening the browser. Press C during stand-by. 14. End/Power Key: F 15. Clear/Back Key: U 16. Multimedia Key: E Ends a call and turns power on/off. Clears the characters before the cursor, returns to the previous screen, etc. Opens the Media Player screen.
Getting Started 17. Keypad: 1 key: Shortcut to the Voice mail centre. (Depending on the SIM card.) Press and hold during stand-by. 2-9 keys: Press and hold during stand-by to display each speed dial phone number. 0 key: Press and hold to enter +. 18. #/Flash Light Key: R Switches symbol screens on the text entry screen. Press and hold to switch languages on the text entry screen. Turns the flash/auxiliary light on or off in camera mode.
Getting Started 19. Camera (External Camera) 20. Sub Display 21. Built-in Aerial: Warning: Do not cover the top of the phone with your hand when in use as this may interfere with the performance of the built-in aerial. 21 19 20 22 22. Mobile Light: Used as a flash or an auxiliary light in camera mode. 23. Battery Cover 24. VIDEO OUT/Handsfree Microphone Connector 25. External Connector: Used to connect either the charger or a USB data cable. 26.
Getting Started 27. Infrared Port: Sends and receives data via infrared. 28. Memory Card Slot Cover 29. Small Light: Used as a battery charge indicator. 30. Side Keys (Side-Up/Side-Down/Camera/Cancel): Side-Up/Side-Down: (These two keys work in reverse with the viewer position of the display.) Moves the highlight up or down. Press during stand-by or during a call to increase or decrease the earpiece volume. Press in camera mode to increase or decrease the zooming ratio.
Getting Started Cancel Key: Press to return to the previous screen. Press and hold to reject an incoming call. Press during an incoming call to send a busy tone to the caller. Press to end the call.
Getting Started Inserting the SIM Card and the Battery 1. Slide off the battery cover ( ). 2. Slide the SIM card into the SIM holder. 3. Hold the battery so that the metal contacts of the battery are facing down, slide the guides on the top of the battery into the battery slots , and then insert it . 1 2 4. Replace the battery cover. Note • Make sure that only 3V SIM cards are used. • Make sure that the standard accessory battery (XN-1BT90) is used.
Getting Started Removing the SIM Card and the Battery 1 1. Ensure that the phone is turned off and that the charger and other accessories are disconnected. Slide off the battery cover ( ). 2. Lift the battery using the protruding edge and remove the battery from the phone. 3. Hold down gently while sliding the SIM card out of the SIM holder ( ). 2 Battery Disposal The device is battery-powered.
Getting Started Charging the Battery You must charge the battery for at least 135 minutes before using your phone for the first time. Using the Charger 1. Open the cover of the external connector, connect the charger to the external socket located at the bottom of the phone by pressing both sides indicated with arrows, and connect to an AC outlet. The small light turns red. Standard charging time: Approx. 135 minutes Note • Charging time may vary depending on the state of the battery and other conditions.
Getting Started To Disconnect the Charger When charging is complete, the small light turns off. 1. Unplug the charger from the AC outlet, then unplug the charger connector from the phone. 2. Close the cover. Note • Do not use any non-approved chargers as they may damage your phone and invalidate any warranties, see “Battery” on page 231 for details.
Getting Started Low Battery during Use When the battery is running low, an alarm will sound and “ ” is displayed on the main and external displays. If you are using your phone and you hear the low battery alarm, attach your charger as soon as possible. The phone may not be able to continue normal operation if you continue to use it.
Getting Started Inserting the Memory Card 1. 2. 3. 4. Turn off the phone. Open the memory card slot cover. Insert the memory card all the way in. Close the cover. Note • The miniSD memory card cannot be used with your phone. • Make sure that the phone is turned off before inserting the memory card. • Be sure to insert the card in the correct direction and orientation. • The SD memory card has a write-protect switch that prevents you from deleting memory contents by accident.
Getting Started Tip • You see the following indicators when the memory card is in use: : : : : : : Appears when the card is inserted. Appears when the card is inserted and locked. Appears when the card is damaged or unusable. Appears when the card is locked and damaged or unusable. Appears when the card is being written or read. Appears when the card is being formatted. Removing the Memory Card 1. Open the memory card slot cover, remove the card, and close the cover.
Getting Started To Enter the PIN Code If activated you are asked to enter a PIN (Personal Identification Number) code and handset lock code after turning on your phone. 1. Enter your PIN code. The PIN code is 4 to 8 digits. 2. Press . To turn the power off, press and hold F for approximately 2 seconds. Note • If your PIN code is entered incorrectly three times in a row, the SIM card is locked. See “Enabling/Disabling the PIN Code” on page 197.
Getting Started Keypad Lock You can lock the keypad to prevent it from being pressed accidentally. Locking the Keypad 1. Press and hold P during stand-by. To unlock, press and hold P. Tip • Emergency numbers (112, etc.) can be entered and dialled regardless of the keypad lock.
Getting Started Display Indicators (Main Display) Indicator area 1. / : Strength of received signal/Service out of range : 3G (UMTS)/GPRS : GSM/GPRS : Roaming outside network 2. Indicator area 12:00 Left soft key 01.01.05 Centre key Right soft key : 3. : 4. / 5. : Offline mode [enabled] Data exchange with external device : Connection to the server [established/communicating] Memory card inserted 6. / : 7. / / 8. : 9. : 10.
Getting Started 11. / / 12. / : / / : Connection status [USB cable/IrDA ON/IrDA exchanging information/Bluetooth wireless setting [enabled (during stand-by or except during stand-by)/exchanging information/talking with the Bluetooth headset]] Java™ application [executed (colour)/suspended (grey)] 13. (No display)/ / / / / : Current profile [Normal/Meeting/Activity/Car/Headset/Silent] 14.
Getting Started 21. / / : WAP/OTA provisioning alerts [WAP alert/OTA provisioning alert/WAP and OTA provisioning alerts] 22. : Voicemail message alert 23. : Connection status [1st IrDA communication [enabled/exchanging information]] 24. : Phone Lock enabled 25. : Keypad Lock enabled 26. /(blank): IrDA setting [enabled/disabled] 27. 12:00: Clock 28. 01.01.05: Date 29. (Operator name) 30.
Getting Started Display Indicators (External Display) Status Indicators 1. / / / : Battery level [sufficiently charged/charging recommended/charging required/empty] 2. / : Strength of received signal/Service out of range 4. / : 5. : Voice call incoming 6. : Video call incoming 7. : Call in progress 8. : Alerts [messages/Delivery Report] 9. : WAP Push service 10. : Daily alarm enabled 11. : 12. 32 12:00 : Clock 3. 13.
Getting Started Opening Your Phone Your phone can be opened in the following three positions: normal, self-portrait and viewer positions. Normal Position 1. Open the phone until the display stops as illustrated. Self-portrait Position 2. Turn the display 180° clockwise. Use this position to take a self-portrait position with the external camera. Do not turn the display anticlockwise as this may damage it. Viewer Position 3. Close the main display toward the keypad.
Navigating Functions Using in the Normal Position of the Display All applications are accessed from the Main menu. To open the Main menu, press the centre key ( ) during stand-by. To launch applications, you will need to highlight menu items, and make selections. To select a menu item (indicated in quotation marks), move the cursor using a, b, c and d, and press to select.
Navigating Functions Using in the Viewer Position of the Display Available keys in viewer position of the display are the side-up and side-down keys, camera key and cancel key. To open the Main menu, press the camera key during stand-by. To select a menu item (indicated in quotation marks), press the side-up and side-down keys and press the camera key to select.
Voice Call/Video Call Functions Tip • You can make and answer a call in the viewer position of the display using the side keys. Making a Voice Call 1. Enter the area code and the phone number you wish to dial and press D to dial. Enter Number If you enter the wrong number, press U to delete the number to the left of the cursor. Emergency Calls 1. Enter 112 or 911 (international emergency number) using the keypad and press D to dial.
Voice Call/Video Call Functions International Calls 1. Press and hold Q until a + (international dialling prefix) sign is displayed. 2. Enter the country code, followed by the area code (without the leading zero) and the phone number, and press D to dial. Adding an Entered Phone Number to the Contacts List 1. After entering a phone number, press [Options] and select “Save Number”. For details on creating a new entry, see “Add New Contact” on page 61.
Voice Call/Video Call Functions Redialling You can redial numbers in the call log. Select from specific categories or “All Calls”. Specific categories contain up to 10 numbers and the “All Calls” list contains up to 30. 1. Press D during stand-by. 2. Select the category from “All Calls”, “Dialled Numbers”, “Missed Calls” or “Received Calls”. To switch logs, press c or d. 3. Highlight the phone number you wish to call. 4. Press D to redial the call.
Voice Call/Video Call Functions Tip • If you have subscribed to the Calling Line Identification (CLI) service and the caller’s network sends the number, the caller’s number is displayed on the screen. If the caller’s name and number are saved in the Contacts List, the caller’s name and phone number are displayed on the screen. • If the number is a restricted number, the display shows “Withheld”.
Voice Call/Video Call Functions Incall Menu (Voice Call) Your phone has additional functions available while a call is in progress. Adjusting the Earpiece Volume During a call, you can adjust the earpiece volume (and handsfree volume, if connected). 1. During a call, press the side-up or side-down key to display the Earpiece Volume screen. 2. Press the side-up key (or a/d) to increase the volume of the call or press the side-down key (or b/c) to decrease the volume.
Voice Call/Video Call Functions Putting a Call on Hold This function allows you to manage two calls at the same time. If you wish to make another call while you are talking to someone, you can put the current call on hold to call someone else. To Make Another Call during a Call 1. During a call, press [Options] and select “Hold”. The current call is put on hold. 2. Press [Options] and select “Dial New Number”. 3. Enter the phone number you wish to make another call to, then press D.
Voice Call/Video Call Functions Call Waiting This service notifies you of another incoming call while you have a call in progress. 1. During a call, press [Options] and select “Hold & Answer” to answer the second call. The first call is put on hold and you can now talk to the second caller. 2. Press [Options] and select “Release & Answer” to end the current call and return to the held call. Note • You need to set “Call Waiting” to “On” if you use the Call Waiting service (p. 190).
Voice Call/Video Call Functions Note • The conference call service may not be available on all networks. Contact your network operator for more information. • You have more options for the Conference call in step 2: • To put all participants on hold, select “Hold All”. • To put all participants except the current call on hold, select “Private”. • To end the call with all participants, select “End Active Call(s)” or “End Held Call(s)”.
Voice Call/Video Call Functions To Have a Private Conversation with One of the Participants If you wish to have a private conversation with one of the participants, you may select the participant from the conference list and put the other participants on hold. 1. During a conference call, select the person that you wish to talk to. 2. Press [Options] and select “Multi Party”. 3. Select “Private”. 4. Once you have finished the private conversation, press [Options] and select “Multi Party”. 5.
Voice Call/Video Call Functions Making a Video Call Video Call 0:00:02 2 3 xxxx XXXXXXXXXXX 1 Options Mute 4 5 Note • Use this function with only the video call enabled phones. • Make sure that the battery is fully charged and the signal length is greater before using this function. • Turn the loud speakers on or use a switch-equipped earphone microphone or handsfree kit so that you can talk while looking at the video call screen on the main display. Status Indicators 1. Sub screen for your image 2.
Voice Call/Video Call Functions Tip • If the called party’s phone is not video call enabled, you can press F and enter the phone number again to make a voice call. • When the call ends, the last call cost is displayed. Answering a Video Call When an incoming call is detected, the phone rings. 1. Press D to answer the call by video or A [Answer] to answer the voice only. Tip • When the call is ended, the call cost is displayed.
Voice Call/Video Call Functions Incall Menu (Video Call) Video Call Options Swap Images Camera Picture Enable Opt. Zoom Loud Speaker Off Enable DTMF Select Back Muting the Microphone 1. During a video call, press [Mute] to mute a microphone. To unmute the microphone, press [Unmute]. Swapping Images You can swap images between the main and sub screens. 1. During a video call, press [Options] and select “Swap Images”. Changing the Image of Yourself 1.
Voice Call/Video Call Functions Using the Optical Zoom Function The optical zoom enables you to zoom the picture more clearly by the actual zooming action of the optical lens. The optical zoom is used up to the [×2] zooming ratio. If you increase the ratio more than that, it is replaced by the digital zoom. 1. During a video call, press [Options] and select “Enable Opt. Zoom”. The image is magnified.
Voice Call/Video Call Functions Video Call Settings To Change the Quality of the Incoming Image You can adjust the quality of the called party’s image. 1. During a video call, press [Options] and select “Video Call Settings”. 2. Select “Incoming Format”. 3. Select “Normal”, “Quality Prio.” or “Frame Rate Prio.”. “Normal”: “Quality Prio.”: “Frame Rate Prio.”: The standard quality is used. The quality of the picture takes precedence over the frame rate. The frame rate takes precedence over the quality.
Voice Call/Video Call Functions To Adjust the Video Exposure 1. During a video call, press [Options] and select “Video Call Settings”. 2. Select “Exposure”. 3. Press a (Light) or b (Dark).
Using the Menu Top Menu 1. Press during stand-by. The Main menu is displayed. 2. Press a, b, c or d to highlight the desired menu, then press to access the function. The sub menu is displayed. For details on the menu options, see the table on pages 248 and 249. Camera Using the Menu in the Viewer Position of the Display Select Exit camera key. Press the cancel key to return to the Main menu.
Using the Menu Shortcuts Your phone has a shortcut key (assigned to the shortcut key: S) with which you can access the desired menu quickly. The default shortcuts are as follows, which you can later customise: • Dialled Numbers • Received Calls • Calendar • Calculator • Voice Recorder To Use the Shortcuts 1. Press the shortcut key. 2. Select the desired item. To Customise the Shortcuts 1. Press the shortcut key. 2. Press [Options] and select “Assign”. The list of the available items is displayed. 3.
Entering Characters When entering characters to create Contacts List entries, text messages or multimedia messages, etc., press the corresponding keys. In multi-tap input method, press each key until the desired character is displayed. For example, press H once for the letter A or twice for the letter B. Table of Characters Pressing each key scrolls characters in the following order. The order varies depending on the language selected.
Entering Characters Key N O Q P R Upper Case Characters Numeric TUV8 tuv8 8 WXYZ9 wxyz9 9 (space) + = < > € £ $ ¥ % & 0 0 Switches character case between four modes: Abc, ABC, 123 and abc. . , ? @ ' " % / ˜ ¿ ¡ ^ Æ å ä Ñ ñ Ö ù ∆ Φ Ξ (space) G-O: Q P: R: 54 Lower Case Characters ! ( < [ æ Ø Γ ↵ : ) > ] à ö Λ ; _ § { Ç ø Ω & = } É ò Π + € \ ¤ è ß Ψ # £ | Å é Ü Σ ∗ $ ¥ Ä ì ü Θ Press and hold to enter 0 - 9 numbers. Press and hold to shift between multi-tap and T9 mode.
Entering Characters Changing the Input Languages You can change the input language on the text entry screen. 1. On the text entry screen, press [Options] and select “Input Language”. 2. Select the desired language. Changing the Input Mode T9 Text Input T9 text input method is a shortcut to enter text easily and quickly. 1. On the text entry screen, press and hold P to enter T9 mode. 2. Press [Options] and select “Input Mode”. 3. Select the input mode (Abc, ABC, abc, 123). 4.
Entering Characters Tip • If you press Q instead of step 6, a space is inserted next to the selected word. Symbols and Punctuation 1. On the text entry screen, press [Options] and select “Add Symbol”. 2. Select the desired symbol. My Dictionary You can create your own word list for T9 text input. 1. On the text entry screen in T9 mode, press [Options] and select “My Dictionary”. 2. Select “Add New Word” and enter a new word. To edit a word in the list 1.
Entering Characters Using Templates You can use the sentences registered in Text Templates when entering characters. For details on creating the text template, see “Adding Phrases to Text Templates” on page 139. 1. On the text entry screen, move the cursor to the point you wish to insert the template. 2. Press [Options] and select “Advanced”. 3. Select “Insert Template”. 4. Select the desired text template. The selected text template is inserted.
Entering Characters To Paste Text 1. On the text entry screen, move the cursor to the point you wish to paste the letters. 2. Press [Options] and select “Advanced”. 3. Select “Paste”. The saved text is pasted.
Contacts List (M 8-1) Contacts Contacts List Manage Group Speeddial List My Contact Details Advanced Select Back You can store the phone numbers and email addresses of your friends, family and colleagues in the Contacts List. Your phone can store up to 500 entries.
Contacts List Birthday: Picture: Assign Tone/Video (For Voice Call, For Video Call, For New Message): Secret: Items Saved in the SIM Memory Name: up to 16 characters Tel 1: up to 32 digits Tel 2 (displayed if “Tel 1” is entered): up to 32 digits Email1: up to 80 characters Group: 11 groups (Group names can be edited using the Manage Group option.) Using the infrared or Bluetooth wireless function, you can send the Contacts List entry to a PC to share the same entries.
Contacts List Selecting the Storage Memory “Contacts” → “Advanced” → “Save New Contact to” 1. Select the Contacts location from “Handset”, “SIM” or “Choice”. Tip • “Choice” prompts you to choose the memory every time you save a new entry. Changing the Contact List Order You can change the listing order of the Contacts List entries between by alphabet order or by group. “Contacts” → “Advanced” → “View Contacts” 1. Select “By Alphabet” or “By Group”.
Contacts List Tip • To create an entry, at least one field must be filled (“First Name”, “Last Name”, “Tel 1 ” or “Email1” for the handset memory; “Name”, “Tel 1” or “Email1” for the SIM memory). Adding a Thumbnail to Entries “Contacts” → “Contacts List” 1. Highlight the desired entry. 2. Press [Options] and select “Edit”. 3. 4. 5. 6. Select “Picture:”. Select “Assign Picture”. Select the desired picture. Press [Save] when finished.
Contacts List Copying Contacts List Entries between SIM Card and Handset “Contacts” → “Advanced” → “Copy All Entries” 1. Select “SIM to Handset” or “Handset to SIM”. Note • When you insert the SIM card into your phone for the first time and start the Contacts List application, the confirmation screen is displayed automatically, asking you if you wish to copy or not. The number of Contacts List entries to be copied varies depending on the SIM capacity.
Contacts List Tip • If more than one phone number is registered for the entry, highlight the desired phone number after step 1 and press D. • You can also dial from the details screen of the Contacts List. On the details screen, select the desired phone number and press D. Editing Contacts List Entries “Contacts” → “Contacts List” 1. Highlight the entry you wish to edit. 2. Press [Options] and select “Edit”. 3. Modify the information. 4. Press [Save] when finished.
Contacts List Deleting a Contact Entry “Contacts” → “Contacts List” 1. Highlight the desired entry. 2. Press [Options] and select “Delete”. Manage Group (M 8-2) Different ringtones can be set for each group. If you do not change a group ringtone, the ringtone assigned in the Settings menu is used. “Contacts” → “Manage Group” 1. Highlight the desired group. 2. Press [Options] and select “Assign Tone/Video”. 3. Select from “For Voice Call”, “For Video Call” or “For New Message”. 4.
Contacts List Editing the Group Name You can edit group names to be assigned to the Contacts List entries. First, change the Contacts List displayed (p. 60). “Contacts” → “Manage Group” 1. Highlight the desired group name. 2. Press [Options] and select “Edit Name”. 3. Modify the name. Assigning a Ringtone or a Ring Video Clip to Each Contacts List Entry A specified ringtone or vibration setting can be associated to a pre-registered entry. “Contacts” → “Contacts List” 1. Highlight the desired entry. 2.
Contacts List 7. Select the desired tone or video clip. For details on selecting a ringtone or a ring video clip in the Settings menu, see “Assigning a Ringtone” on page 173 or “Assigning a Ring Video Clip File” on page 174. 8. Press [Save] when finished. Memory Status This function helps you to check the memory used in the Contacts List. “Contacts” → “Advanced” → “Memory Status” Speeddial List (M 8-3) You can set a maximum of 8 phone numbers in the speeddial list (p. 37).
Contacts List To Edit the Speeddial List “Contacts” → “Speeddial List” 1. Highlight the entry you wish to edit. 2. Press [Options] and select the desired option. “Re-Assign” (displayed when a phone number is already assigned): Displays the Contacts List entries. Select (Reassign) other entries. “Assign” (displayed when no phone number is assigned): Displays the Contacts List entries. Select (assign) the desired entry. “View”: Displays the assigned phone number.
Contacts List For “As Message” For details, see “MMS” on page 87. For “Via Bluetooth” For details, see “Bluetooth” on page 206. For “Via Infrared” For details, see “Infrared” on page 212. Receiving a Contacts List Entry When the phone receives a Contacts List entry, a confirmation message is displayed during stand-by. 1. Press [Yes]. The received entry is saved in the Contacts List. Press [No] to reject. Tip • For details on making Infrared or Bluetooth wireless settings, see “Connectivity” on page 206.
Camera (M 5) Your phone has an integrated digital camera. This allows you to shoot and send pictures and video clips wherever you are. Taking Pictures “Camera” 1. Press to take the picture. The shutter sounds and the still image of the taken picture is displayed. 2. Press [Save]. To cancel, press [Cancel]. The taken picture is saved in My Items. Note • Press the camera key instead of in the viewer position of the display.
Camera Note • Do not rotate the main display anti-clockwise. Otherwise, the phone may malfunction. Sending Taken Pictures You can send the taken picture via “With Message” or “live! Postcard”. (The Postcard service is not available with some service providers. Contact your service provider for more information.) “Camera” 1. Press to take the picture. 2. Press . 3. Select the send option. For details, see “Creating a New Message” on page 87.
Camera Selecting the Picture Size You can select the size of pictures. All taken pictures are saved in the JPEG format. “Camera” → [Options] → “Picture Settings” → “Picture Size” 1. Select the desired size. Picture Sizes: 1224 × 1632 dots 960 × 1280 dots 768 × 1024 dots 480 × 640 dots 240 × 320 dots 120 × 160 dots 120 × 128 dots Using the Digital Zoom Function To Adjust the Zooming Ratio 1. In the viewfinder mode, press a or b.
Camera To Enable or Disable the Optical Zoom The optical zoom enables you to zoom the picture more clearly by the actual zooming action of the optical lens. The optical zoom is used up to the [×2] zooming ratio. If you increase the ratio more than that, it is replaced by the digital zoom. “Camera” → [Options] → “Advanced” 1. Select “Enable Opt Zoom”. Select “Disable Opt Zoom” to disable. If you select “Disable Opt Zoom”, you can only use the digital zoom function. 2. Press a or b.
Camera 1. Select the desired light colour. Light Colours: White/Red/Yellow/Green/Blue/Violet/Light Blue/Disco To Change the Mobile Light Mode Set the mobile light according to your purpose. “Camera” → [Options] → “Picture Settings” → “Mobile Light” → “Switch On/ Off” 1. Select the desired mode. “On” ( ): The light is always on. “Auto” ( ): The light turns on if the phone detects that the conditions are dark. “Low Light” ( ): Select this mode for macro shooting. “Off”: The light is always off.
Camera Continuous Shoot You can take continuous shoots in various options. “Camera” → [Options] → “Camera Modes” → “Continuous Shoot” 1. Select the desired mode. The following continuous shoot modes are available: “Off”: The continuous shoots are cancelled. “4 Pictures”/“9 Pictures”: Takes 4 or 9 pictures continuously.
Camera Note • When you select “Manual” to take continuous pictures, press or the camera key (in the viewer position of the display) manually in the desired speed. • When the Timer and Continuous Shoot functions are simultaneously set, “ ” (for “4 Pictures”, for example) is displayed instead. Selecting a Frame You can select the frame from preset patterns. You can also select a frame in Saved Pictures. “Camera” → [Options] → “Camera Modes” → “Photo Frame” 1. Select “Preset Frames” or “My Pictures”. 2.
Camera Using the Full Screen You can display the preview on the full screen without the soft key area and indicator area. “Camera” → [Options] → “Advanced” 1. Select “Full Viewfinder”. To return to the normal viewfinder, select “Normal Viewfinder”. Selecting the Picture Quality “Camera” → [Options] → “Picture Settings” → “Picture Quality” 1. Select the desired picture quality.
Camera Selecting the Storage Memory You can select the location to save the taken pictures in. “Camera” → [Options] → “Advanced” → “Save New Pictures to” 1. Select the desired location from “Handset Memory”, “Memory Card” or “Choice”. Note • If you select “Choice”, select the desired location every time you save. Focus Setting This function enables you to set the focus mode along with the situation for taking a picture. “Camera” → [Options] → “Advanced” → “Focus Setting” 1. Select the desired option.
Camera Auto Save You can set the phone to save pictures automatically. “Camera” → [Options] → “Advanced” → “Auto Save” 1. Select “On”. Select “Off” to disable. Using the Help Function “Camera” → [Options] → “Help” Exiting from the Viewer Position of the Display Carry out the following operation when you want to go back from the viewer position of the display to the normal position. 1. Press and hold the cancel key in the viewer position.
Camera Recording Video Clips You can record a video clip with your phone. You can also use this function in the viewer position of the display. Recording Video Clips “Camera” The preview is displayed through the screen. 1. Press . Press the camera key in the viewer position of the display. 2. To stop recording, press . To view the preview before saving, select “Preview”. 3. Select “Save”. The video clip is saved in My Items.
Camera • The sound can be recorded with a video clip if the microphone is turned on. The default setting of the microphone is set to “On”. To record a video clip without the sound, turn off the microphone. For details, see “Recording Video Clips with the Sound” on page 85. Sending Video Clips “Camera” 1. Press . Press the camera key in the viewer position of the display. 2. To stop recording, press . To view the preview before saving, select “Preview”. 3. Select “Save and Send”.
Camera To Enable or Disable the Optical Zoom The optical zoom enables you to zoom the picture more clearly by the actual zooming action of the optical lens. The optical zoom is used up to the [×2] zooming ratio. If you increase the ratio more than that, it is replaced by the digital zoom. “Camera” → [Options] → “Advanced” 1. Select “Enable Opt Zoom”. Select “Disable Opt Zoom” to disable. 2. Press a or b. Note • The default setting is “Enable Opt Zoom”.
Camera Mobile Light You can record a video clip in various colour modes. “Camera” → [Options] → “Video Settings” → “Mobile Light” → “Light Colour” 1. Select the desired light colour. Light Colours: White/Red/Yellow/Green/Blue/Violet/Light Blue/Disco To Change the Mobile Light Mode Set the mobile light according to your purpose. “Camera” → [Options] → “Picture Settings” → “Mobile Light” → “Switch On/ Off” 1. Select the desired mode. “On” ( ): The light is always on.
Camera Note • If you select “For Message” for the recording time, the file size is limited depending on the service provider. Therefore, the quality is also limited for the setting. • “Save and Send” is not displayed after recording in the Extended Video mode. • When you select “Extended Video”, you can select the video format from “QCIF or SubQCIF” or “QVGA(MPEG4)”. Switching to the Photo Camera Mode You can switch to the digital camera mode. You can also switch to the photo camera mode by pressing c.
Camera Recording Video Clips with the Sound To record a video clip with the sound, the microphone needs to be activated. “Camera” → [Options] → “Video Settings” → “Microphone” 1. Select “On” or “Off”. Note • The microphone is already turned on in the default setting. Select “Off” to record a video clip without the sound. Tip • The file size of a video clip can be reduced if the sound is not recorded. Changing the Picture Size You can change the picture size during playback/recording.
Camera Focus Settings This function enables you to adjust the focus automatically along with the situation for recording a video clip. “Camera” → [Options] → “Advanced” → “Focus Setting” 1. Select the desired option. Focus Mode indicators : Normal : Macro : Manual Focus To Use the Help Function “Camera” → [Options] → “Help” Video Encoding “Camera” → [Options] → “Advanced” → “Video Encode” 1. Select the appropriate format.
Messages (M 4) Messages Create New Inbox Drafts Templates Sent Outbox Messenger Select Your phone allows you to send and receive text, multimedia and email, and receive WAP alerts as well. MMS MMS allows you to send and receive multimedia messages of up to 300 KB with images, sound, or video clips attached. Back Note • Some MMS functions may not always be available depending on your network. Contact your network operator for more information.
Messages 2. (Email/MMS) Press [Options] and select “Insert Item”, if you wish to attach files. 3. (Email/MMS) Select the desired item. Details are given in the following sections. “Pictures”: Attaches picture files. “Sounds”: Attaches sound files. “Videos”: Attaches video clip files. “Attach Contact”: Attaches Contacts List entries. “Attach Appointment”: Attaches Schedule entries. 4. Select “Send”. 5. (MMS) Enter or select the email address or phone number from the Contacts List.
Messages 6. (Email/MMS) Select the subject field and enter the subject. 7. (MMS/SMS) Transportation type (SMS or MMS) is shown in the field of “Message Type”. Select the field and select the desired transportation type. 8. Select “Advanced” to set the advanced message sending options. • “Delayed Delivery” (“No delay”, “30 minutes”, “1 hour”, “6 hours”, “1 day”, “1 week”) (for MMS): Sets the time the message is delivered after the Send key is pressed.
Messages Note • The current message size displayed while you are creating the message is an approximation. • If a message cannot be sent for some reason, the message stays in the Outbox and the “ ” is displayed during stand-by. Tip • To save the message without sending, select [Options] and select “Save to Drafts” in step 2. • You can send the following items attached to multimedia messages. Details are given in the following sections.
Messages 2. Select the desired file. If you wish to take new pictures, record sounds or video clips, select “Take Picture”, “Record Sound” or “Record Video”. • (For pictures) For attached pictures, select the appropriate resize option, as the maximum message size for sending varies depending on the network operator. • (For sounds) For attached sounds, select the appropriate format option, as the maximum message size for sending varies depending on the network operator. To Attach a Schedule Entry 1.
Messages To Add a Slide Show 1. In Step 2 in “Creating a New Message” on page 87, select “Options” and select “Add Slide”. If you wish to add more slides, select “Add Slide Before” or “Add Slide After”. 2. Enter the message. If you wish to set the duration of each slide, press [Options] and select “Slide duration”, then select the desired duration. Tip • You can create messages up to 300 KB. Each slide can contain one picture and/or one sound file or video clip. To Remove or Replace Attachments 1.
Messages Reading MMS Messages you receive are saved in the Inbox. To View Messages Before Downloading The MMS indicator ( ) is displayed when you are receiving an incoming message. A → “Inbox” 1. Select the message alert you wish to view. Tip • The volume varies depending on the Application Volume settings (p. 146). The sound is deactivated when “Application Volume” is set to “Silent”. Storing the Phone Number of a Sender in the Contacts List A → “Inbox” 1.
Messages Downloading a Single MMS A → “Inbox” 1. Highlight the message alert ( ) you wish to download. 2. Press [Options] and select “Download”. The downloading starts and the indicator becomes . Tip • You can download multiple messages at the same time. See the next section. Downloading Multiple MMS A → “Inbox” 1. Press [Options] and select “Advanced”. 2. Select “Multiple Select”. 3. Select the desired message alert using the “Select/Unselect” or “Select All” option. 4. Select “Download”.
Messages Forwarding a Message A → “Inbox” 1. Highlight the message you wish to forward. 2. Press [Options] and select “Forward”. 3. Perform steps 2 to 9 in “Creating a New Message” on page 87. Remote Forward You can transfer your email messages saved in the mail server directly to other recipients. A → “Inbox” 1. Highlight the message alert ( ) you wish to transfer. 2. Press [Options] and select “Forward”. 3. Perform steps 2 to 5 in “Creating a New Message” on page 87.
Messages Sending a Picture File with Postcard Your phone allows you to send multimedia messages to a Vodafone specific Postcard service centre that prints the picture and mails it to the recipient’s home address specified in the MMS message. (Your phone is initially provided with the address of a Vodafone specific Postcard service centre, and its address cannot be changed.) Note • This service is not available with some service providers. Please contact your service provider for more information.
Messages Note • The items “Name”, “Address” and “City” are necessary to complete sending Postcards.
Messages Cell Broadcasts (M 4-10) You can receive cell broadcast messages or general messages such as weather forecasts and traffic reports. This information is broadcast to subscribers in certain network areas. This function may not be available on all mobile phone networks. Contact your network operator for more information. Enabling/Disabling Cell Broadcasts “Messages” → “Cell Broadcasts” → “Switch On/Off” 1. Select “On” or “Off”.
Messages 2. Select the desired language. 3. Press [Save]. Subscribing to Cell Broadcasts Select the page of the cell broadcast message that you want. “Messages” → “Cell Broadcasts” → “Settings” → “Set Info Subjects” → [Options] 1. Select “Add/Remove”. 2. Select the desired page. 3. Press [Back]. Tip • If the desired page is not in the list that appears in step 2, select “Create Subject” in step 1, then enter the subject code to add a page. For details on the subject code, contact your service provider.
Messages Area Info (M 4-11) The Area Info is the message information that operators send to subscribers in certain areas. When you receive Area Info, the message (area code) is displayed during stand-by. Note • This function may not be available on all mobile phone networks. Contact your network operator for more information. Enabling/Disabling Area Info “Messages” → “Area Info” 1. Select “On” or “Off”. Note • If Area Info is set to “On”, the stand-by time will decrease.
Messages Setting Up MMS/SMS/Email (M 4-12) General Settings “Messages” → “Settings” → “General Settings” 1. Select the item you wish to set up. • “Home Download” (“Always download”, “Always defer”): Controls message download timing inside your network area. “Always download”: Downloads messages immediately from the server. “Always defer”: Defers message download. • “Roam. Download” (“Always download”, “Always defer”): Controls message download timing when roaming outside of your network.
Messages • “Delivery Rep. Allow”: Enables or disables Delivery Rep. Allow when receiving a message, which applies to the Delivery Report function. • “Auto Delete” (“None”, “Inbox”, “Sent”, “Both”): Deletes the oldest message automatically, when the Inbox, Sent or both (Inbox and Sent) is full. • “Edit Signature”: Opens the screen to enter the signature. • “Reply History” (“Yes”, “No”): Disables or enables whether the message will be added to your reply message or not.
Messages • “Message Format”: Select the message format to be used when creating a new message. • “Optimisation”: When set “On” (default), double-byte characters such as European characters with an accent are converted into single-byte characters and sent. When “Off”, double-byte characters are sent as displayed. Please note that you may be charged double for double-byte characters sent in an SMS when Optimisation is set “Off”. Select “On” or “Off”. MMS Settings “Messages” → “Settings” → “MMS Settings” 1.
Messages Email Settings “Messages” → “Settings” → “Email Settings” 1. Select the item you wish to set up. • “Download Interval”: Sets the download interval. • “Max Message Size”: Defines the maximum size of messages that are downloaded.
Vodafone live! (M 2) Your phone is already configured to access Vodafone live! and the mobile internet*. Vodafone live! is a new mobile internet portal which is your gateway to a new world of information, games, music and services. Because your phone uses 3G (UMTS), it has a system that is much faster than previous ways of getting mobile information. Also, the connection is ‘always on’ which means there is no need to wait for dialling up.
Vodafone live! Starting the WAP Browser 1. Press C during stand-by. To Exit the WAP Browser 1. Press F to exit the browser. Navigating a WAP Page • a b c d: Move the highlights around in the screen. • : Executes the option displayed in the lower centre of the screen. • A: Launches the browser option menu. • C: Selects an action displayed in the lower right of the screen. Used to access “Vodafone live!” by opening the browser. • F (short press): Exits the browser.
Vodafone live! Browser Menu To Edit Favourites C → [Options] → “Bookmarks” 1. Select the desired URL, and press [Options]. You can edit the list of Bookmarks by the following options: “Select”: Selects a bookmark. “Details”: Displays detailed information of the WAP page. “Send page”: Sends the URL address to recipients. “New”: Creates new folders or bookmarks. “Rename”: Renames bookmarks. “Edit URL”: Edits URL address of the bookmark. “Move”: Moves Bookmarks to another location. “Delete”: Deletes bookmarks.
Vodafone live! The Browser Options You can use various options of the WAP browser. C → [Options] “Select”: Selects a WAP page. “Home”: Goes to the homepage. “Bookmarks”: (see page 107.) “Mark Page”: Marks the selected WAP page. “Save items”: Saves items from WAP pages. “Go to URL”: Goes to the WAP page that you enter the URL address. “Access History”: Shows the history where you have browsed. “Forward”: Goes to the next page of the pages displayed.
Vodafone live! “Search This Page”: “Alert Inbox”: “Copy Text”: “Settings”: “Restart browser”: “About”: Searches specific words in the WAP page. Displays WAP Push alerts. Copies the text on the web page. Displays the Settings menus. Restarts the browser. Displays the browser information. Browser Settings C → [Options] → “Advanced” → “Settings” “Send Referrer”: Enables or disables the notification of the referrer. “Cookies”: Adjusts the setting of cookies.
Media Player (M 3) Media Player can play sound files and video clip files by switching between two applications: Music Player and Video Player. These applications can handle files in MP4 and 3gp (video clip, sound) format. While playing back sound files in the background, you can use other menus. Switching between Music Player and Video Player When you start the Media Player for the first time, the Music Player is started.
Media Player Tip • You can return to the Main menu screen while playing back the file in the background. • You can create your playlist listing only the desired files (p. 113). • You can make tone adjustment in step 1. Press [Options] and select “Tone Control”. Select from “Normal”, “Bass”, “Surround” or “Surround Bass”. • You can select the playback pattern in step 1. Press [Options] and select “Playback Pattern”.
Media Player 2. Press [Options] and select “Add to Playlist”. The playlists are displayed. For details on adding a playlist, see “Adding a New Playlist” on page 113. 3. Select the desired folder. 4. Press . The file highlighted in step 1 is saved. To delete the playlist, highlight the playlist and press [Options]. Then select “Delete Playlist”. Streaming You can play back sound files while downloading them from the mobile network. You can also register the address of the Web site as a bookmark.
Media Player Adding a New Playlist “Media Player” 1. Press [Options] and select “Open Music”. 2. Select “Handset Memory” or “Memory Card”. 3. Press [Options] and select “Add New Playlist”. 4. Enter the desired playlist name. 5. Press . Video Player Playing Back Video Clip Files “Media Player” 1. Select the desired file. To pause playback, press . To stop playback, press C. Tip • You can create your playlist listing only the desired files (p. 115).
Media Player Searching a File to Be Played Back “Media Player” 1. Press [Options] and select “Search”. 2. Enter the first few letters of the title. Search results are displayed in alphabetical order and the matching file is highlighted. Adding a File to the Playlist You can create a playlist registering desired files. “Media Player” 1. Highlight the file you wish to add to the playlist. 2. Press [Options] and select “Add to Playlist”. The playlists are displayed.
Media Player Streaming You can play back video clip files while downloading them from the mobile network. You can also register the address of the Web site as a bookmark. “Media Player” 1. Press [Options] and select “Streaming”. 2. Select from “Enter URI”, “Favourites”, “Access Log” or “Display Size”. “Enter URI”: Enter the desired address of the Web site. The browser opens, starts downloading and plays back. “Favourites”: The address of the Web site is registered.
Media Player Editing the Video Clip File “Media Player” 1. Select the file you wish to edit. 2. Press [Options] and select “Edit”. 3. Select the desired option. “Crop”: “Subtitle”: Select the desired area to be cropped. Create a subtitle to add to the file. Backlight “Media Player” 1. Select the file the backlight of which you wish to adjust. 2. Press [Options] and select “Settings”. 3. Select “Backlight:”. 4. Select from “Always On”, “Always Off” or “Normal Settings”.
My Items (M 6) My Items Pictures Videos Sounds & Ringtones Games & More Bookmarks My Saved Page Text Templates Select My Items contains several types of picture, sound and video clip data. Also included in My Items are frequently used text message phrases and accessed WAP pages (addresses) which you can use. You can also transmit picture, sound and video clip data via infrared or Bluetooth wireless technology to OBEX-enabled phones.
My Items Pictures (M 6-1) Pictures that are taken by a digital camera or images that are downloaded from mobile Internet sites can be managed. You can register pictures in the following formats: JPEG, PNG, WBMP and GIF. Viewing Pictures “My Items” → “Pictures” 1. Select the file you wish to view. The selected picture is displayed. Switching the Memory Source “My Items” → “Pictures” 1. Press d. The tab switches and the list is displayed from the memory card. To go back to the handset memory, press c. 2.
My Items Saving an Image to Contacts List Entries You can use this option only for pictures saved in the handset memory. “My Items” → “Pictures” 1. Highlight the file you wish to add to Contacts List. 2. Press [Options] and select “Add to Contact”. To overwrite, select the data you wish to save. To save as a new entry, select “As New Contact”. For details on entering a name, see “Add New Contact” on page 61. Editing Pictures “My Items” → “Pictures” 1. Highlight the file you wish to edit. 2.
My Items Adjusting the Size You can adjust the picture to an appropriate size depending on the scene. “My Items” → “Pictures” 1. Highlight the file you wish to adjust the size of. 2. Press [Options] and select “Resize”. 3. Select the desired option. Each option resizes the picture for each use. “To Wallpaper” “Power On/Off” “For Incoming Call” “Alarm” “Cut” Note • “Resize” may not be available depending on the original picture and copyright issued.
My Items Sending a Picture File “My Items” → “Pictures” 1. Highlight the file you wish to send. 2. Press [Options] and select “Send”. 3. Select the desired option. For details on creating a message, see “Creating a New Message” on page 87. Note • The Postcard service is not available with some service providers. Please contact your service provider for more information. • Some pictures protected with a copyright may not be sent attached to a message.
My Items Using Multiple Select You can select more than one file for moving, copying and deleting. Note • The following procedure applies when the entries other than “Get new” are highlighted. “My Items” → “Pictures” → [Options] → “Advanced” → “Multiple Select” 1. Select the desired file names. 2. Press [Options] and select the desired menu. If you select “Delete”, a confirmation message is displayed. Tip • To remove the check, select the file again or select “Unselect” in step 2.
My Items To Delete the File “My Items” → “Pictures” 1. Highlight the desired file. 2. Press [Options] and select “Delete”. To See the Picture Details “My Items” → “Pictures” 1. Highlight the file of which you wish to view the detail information. 2. Press [Options] and select “Details”. Uploading Picture Files You can upload your pictures to the live! Studio. Note • This service is not available with some service providers. Please contact your service provider for more information. “My Items” → “Pictures” 1.
My Items Downloading Picture Files “My Items” → “Pictures” → “Get new” The picture file download site is displayed. Tip • For details on transmitting My Items data, see “Sending My Items Data” on page 137. Videos (M 6-2) Video clips that are recorded by a video camera or video clips that are downloaded from mobile Internet sites can be managed. Playing Back Video Clip Files “My Items” → “Videos” 1. Select the file you wish to play back. 2. Press . To resume, press again. To stop playback, press [Back].
My Items Sending a Video Clip File “My Items” → “Videos” 1. Highlight the file you wish to send. 2. Press [Options] and select “Send”. 3. Select the desired option. For details on creating a message, see “Creating a New Message” on page 87. Note • Video clips protected with a copyright cannot be sent attached to a message, with the exception of Separate Delivery files. To Record a Video You can record a video also from My Items.
My Items 2. Press [Options] and select “Advanced”. Select the desired option according to your purpose. “Move”: Moves the files to another folder. Select the desired folder to move. “Copy”: Copies the file. Select the desired folder to copy. “Create Folder”: Creates a new folder. Using Multiple Select You can select more than one file for moving, copying and deleting. Note • The following procedure applies when the entries other than “Get new” are highlighted.
My Items To Sort the Files Note • The following procedure applies when the entries other than “Get new” are highlighted. “My Items” → “Videos” → [Options] → “Advanced” → “Sort” 1. Select the desired order. To Rename the File “My Items” → “Videos” 1. Highlight the desired file. 2. Press [Options] and select “Rename”. To Delete the File “My Items” → “Videos” 1. Highlight the desired file. 2. Press [Options] and select “Delete”. To See the Video Clip Details “My Items” → “Videos” 1.
My Items Uploading Video Clip Files You can upload your video clips to the live! Studio. Note • This service is not available with some service providers. Please contact your service provider for more information. “My Items” → “Videos” 1. Highlight the file you wish to upload. 2. Press [Options] and select “Send”. 3. Select “To live! Studio”. Note • Video clips protected with a copyright cannot be uploaded, with the exception of Separate Delivery files.
My Items Sounds & Ringtones (M 6-3) The downloaded sound files and the AMR data recorded by Voice Recorder are managed in Sounds & Ringtones. The default ringtones are not contained within Sounds & Ringtones. Only the sound files you can play back with the phone are stored in Sounds & Ringtones. Playing Back Sound Files “My Items” → “Sounds & Ringtones” 1. Select the file you wish to play back. To stop playback, press . Note • This option may not be available in all regions.
My Items Using the Sound Files as a Ringtone “My Items” → “Sounds & Ringtones” 1. Highlight the file you wish to use as a ringtone. 2. Press [Options] and select “Set as Ringtone”. Note • The formats that can be used for ringtones are SMAF, MIDI (SMF, SP-MIDI), MP3, MP4 and XMF. Other formats cannot be used. Sending a Sound File “My Items” → “Sounds & Ringtones” 1. Highlight the file you wish to send. 2. Press [Options] and select “Send”. 3. Select the desired option.
My Items Operating the Files You can copy, move, sort, rename, and delete the saved sound files. “My Items” → “Sounds & Ringtones” 1. Highlight the desired file. 2. Press [Options] and select “Advanced”. Select the desired option according to your purpose. “Move”: Moves the files to another folder. Select the desired folder to move. “Copy”: Copies the file. Select the desired folder to copy. “Create Folder”: Creates a new folder.
My Items To Sort the Files Note • The following procedure applies when the entries other than “Get new” are highlighted. “My Items” → “Sounds & Ringtones” → [Options] → “Advanced” → “Sort” 1. Select the desired order. To Rename the File “My Items” → “Sounds & Ringtones” 1. Highlight the desired file. 2. Press [Options] and select “Rename”. To Delete the File “My Items” → “Sounds & Ringtones” 1. Highlight the desired file. 2. Press [Options] and select “Delete”.
My Items Uploading Sound Files You can upload your sounds to the live! Studio. Note • This service is not available with some service providers. Please contact your service provider for more information. “My Items” → “Sounds & Ringtones” 1. Highlight the file you wish to upload. 2. Press [Options] and select “Send”. 3. Select “To live! Studio”. Note • Sounds protected with a copyright cannot be uploaded, with the exception of Separate Delivery files.
My Items Games & More (M 6-4) Along with the preloaded application, downloaded applications are saved in Applications. Using Applications Various kinds of Vodafone specific applications can be used on this phone. To use applications, download the applications via the mobile Internet. Some applications offer the ability to connect to a network either within a game or a network based application.
My Items Executing Applications “My Items” → “Games & More” Downloaded applications are sequentially displayed from the latest one. 1. Select the title of the application you wish to execute. The selected application is executed. When using network connection type applications, connection to the network can be selected. 2. To end the application, press F and select “End”. To Set a Screensaver Application “My Items” → “Games & More” 1. Highlight the desired screensaver application. 2. Press .
My Items More Games “My Items” → “Games & More” → “More Games” 1. Select the application you wish to download. The confirmation screen is displayed after various WAP browser screens. 2. Press to start downloading. 3. Press when finished. Activating Files with Copyright Protection (DRM) Some pictures, sound files, and video clips have a digital copy protection program, which is called DRM (Digital Rights Management). You need to activate the digital licence permission to open the files.
My Items Sending My Items Data Choose the appropriate menu. “My Items” → “Pictures” “My Items” → “Sounds & Ringtones” “My Items” → “Videos” “My Items” → “Other Documents” 1. Highlight the desired file. 2. Press [Options] and select “Send”. 3. Select “Via Bluetooth” or “Via Infrared”. For “Via Bluetooth” For details, see “Bluetooth” on page 206. For “Via Infrared” For details, see “Infrared” on page 212.
My Items Receiving the My Items Data When the phone receives the My Items data, a confirmation message is displayed during stand-by. 1. Press [Yes]. The received data is saved in the corresponding My Items folder. Tip • For details on Infrared or Bluetooth wireless settings, see “Connectivity” on page 206. Bookmarks (M 6-5) You can store desired (or frequently used) pages (addresses) in Bookmarks. It can save you time in accessing WAP pages. For details, see “Vodafone live!” on page 105.
My Items Text Templates (M 6-7) You can register up to 50 text templates for use in text messages and multimedia messages. The maximum capacity of the text templates is 100 KB. Adding Phrases to Text Templates “My Items” → “Text Templates” → “Add New Template” 1. Enter the text and press . Editing Text Templates “My Items” → “Text Templates” 1. Highlight the text template you wish to edit. 2. Press [Options] and select “Edit”. 3. Modify the text and press .
My Items Sending Text Templates “My Items” → “Text Templates” 1. Highlight the text template you wish to send. 2. Press [Options] and select “Send Template”. Other Documents (M 6-8) Some types of files excluding picture files are stored in the Other Documents folder of the phone. You can edit and use these files as My Items data. Opening the Document File “My Items” → “Other Documents” 1. Select the desired file. Sending the Document File “My Items” → “Other Documents” 1.
My Items Operating the Files You can copy, move, sort, rename, and delete the saved documents. “My Items” → “Other Documents” 1. Highlight the desired file. 2. Press [Options] and select “Advanced”. Select the desired option according to your purpose. “Move”: Moves the files to another folder. Select the desired folder to move. “Copy”: Copies the file. Select the desired folder to copy. “Create Folder”: Creates a new folder.
My Items To Sort the Files “My Items” → “Other Documents” → [Options] → “Advanced” → “Sort” 1. Select the desired order. To Rename the File “My Items” → “Other Documents” 1. Highlight the desired file. 2. Press [Options] and select “Rename”. To Delete the File “My Items” → “Other Documents” 1. Highlight the desired file. 2. Press [Options] and select “Delete”. To See the Document Details “My Items” → “Other Documents” 1. Highlight the file of which you wish to view the detail information. 2.
Games & More (M 1) Games (M 1-1) Games & More Games Screensavers Settings Java™ Information Select Back The list of Java™ applications is displayed. Downloaded applications are displayed in order starting from the latest one. Executing Applications For details on executing applications, see “Executing Applications” on page 135. Setting Security Level You can set the security level for selected Java™ applications. “Games & More” → “Games” 1. Highlight the desired Java™ application. 2.
Games & More “Write User Data”: Sets security to write entries in your phone, such as Contacts List entries, mailbox (Inbox) and My Items data. “Use Multimedia”: Sets security to use the barcode scanning function. “Location Access”: Sets security to update the positioning function. “Reset”: Clears all the above settings. 4.
Games & More Viewing Application Information You can check the information of Java™ applications. “Games & More” → “Games” 1. Highlight the desired Java™ application. 2. Press [Options] and select “Information”. Deleting an Application You can delete an application from the handset memory. “Games & More” → “Games” 1. Highlight the desired Java™ application. 2. Press [Options] and select “Delete”. Screensavers (M 1-2) You can download screensaver applications for the stand-by screen.
Games & More Set Applications “Games & More” → “Screensavers” → “Set Applications” The downloaded applications are displayed. 1. Select the desired screensaver application. Settings (M 1-3) Application Volume You can set the volume of the application such as the sound effect to one of the five levels or silent. When “Application Volume” is set to “Silent”, this setup has priority. “Games & More” → “Settings” → “Application Volume” The current volume level is displayed. 1.
Games & More To Set the Blinking Operation This setting enables the backlight to be controlled by the application. If set to “Off”, the backlight cannot be turned on from the application. “Games & More” → “Settings” → “Backlight”→ “Blink” 1. Select “On” or “Off”. Vibration When the vibrator is set in the application, you can choose whether the operation is enabled or disabled. When a SMAF file is specified in the application, you can operate the vibrator set in the SMAF file.
Games & More Calls & Alarms You can set the priority of incoming calls and alarms while an application is operating. “Games & More” → “Settings” → “Calls & Alarms” 1. Select “Incoming Call”, “Video Call”, “Incoming Message” or “Alarm”. 2. Select the desired method. • “Call Priority”, “Message Priority” or “Alarm Priority”: The application is suspended automatically, and you can receive a call or a message, or the alarm will sound.
Organiser (M 7) Calendar (M 7-1) Calendar allows you to easily schedule appointments or events, which are associated with the date and time. These entries can also be sent via infrared or Bluetooth wireless technology to a PC to share the same schedules. When you exchange entries with other devices, the date and time displayed may be different to that of the original data depending on the data format of the receiving device. Creating a New Entry “Organiser” → “Calendar” 1.
Organiser 9. Select “Repeat” and select the desired option. 10. Select “Description” and enter a memo for the schedule entry. 11. Select “Secret” and select “On” or “Off” to make it secret data. 12. Press [Save]. Note • If the date and time settings have not been made, the date and time entry screen is displayed (p. 185). • The reminder will not sound when “Ringer Volume” (p. 172) is set to “Silent”. Sending a Schedule Entry “Organiser” → “Calendar” 1.
Organiser Receiving a Schedule Entry When the phone receives a schedule entry, a confirmation message is displayed during stand-by. 1. Press [Yes]. The received entry is saved in the Calendar. Press [No] to reject. Tip • For details on making Infrared or Bluetooth wireless settings, see “Connectivity” on page 206. Viewing a Schedule Entry “Organiser” → “Calendar” 1. Select the day you wish to view. The daily view is displayed. To Search By Date 1.
Organiser 2. Press [Options] and select “Edit”. 3. Select the desired item and modify the entry. 4. Press [Save]. Deleting Schedule Entries 1. In the monthly or daily view, press [Options] and select “Delete”. 2. Select the desired option. “This Appointment” (daily view only): Deletes the selected appointment. “All This Day”: Deletes all entries for the selected day. “All This Month” (monthly view only): Deletes all entries for the selected month.
Organiser Alarms (M 7-2) Setting the Alarms The alarm function allows you to be alerted at a specified time. Note that you need to set the current date and time before setting the alarm function if it has not been done already. Note • The alarm will not ring when “Ringer Volume” (p. 172) is set to “Silent”. “Organiser” → “Alarms” 1. Select the blank setting. 2. Enter the desired time. 3. Select the repeat option. To Change the Type of Alarm Tone 1. On the Set Alarm screen, select “Assign Tone/Video”. 2.
Organiser To Change the Type of Video 1. On the Set Alarm screen, select “Assign Tone/Video”. 2. Select “Assign Alarm Video”. 3. Select the desired video. To Change the Snooze of the Alarm Tone 1. On the Set Alarm screen, select “Snooze”. 2. Select the desired snooze option. To Change the Alarm Volume 1. On the Set Alarm screen, select “Alarm Volume”. 2. Press a (or d) to increase the volume or press b (or c) to decrease the volume. To Change the Vibration of Alarm Tone 1.
Organiser Resetting an Alarm Setting “Organiser” → “Alarms” 1. Highlight the alarm you wish to reset. 2. Press [Options] and select “Reset Alarm”. Resetting All Alarm Settings “Organiser” → “Alarms” → “Clear All” Calculator (M 7-3) The calculator function performs the 4 arithmetic calculations using up to 12 digits. “Organiser” → “Calculator” The calculator is displayed on the display. Key operations for calculation are as follows: To enter a decimal point, press P.
Organiser Rate Conversion You can also use the calculator as a currency calculator to convert from/to a home currency using a conversion rate that you enter. To Set a Currency Conversion Rate “Organiser” → “Calculator” → [Options] → “Currency Converter” → “Exchange Rate” 1. Select “Domestic” or “Foreign”. 2. Enter the currency conversion rate. To delete a digit, press U. To Convert a Value “Organiser” → “Calculator” 1. Enter the value to be converted. 2. Press [Options] and select “Currency Converter”. 3.
Organiser Voice Recorder (M 7-4) This allows you to record a voice clip, which can be used to remind you of schedule entries or be sent within a multimedia message. The recorded voice clip is saved in Saved Sounds. Voice clips are saved in .amr format. Recording a Voice Clip “Organiser” → “Voice Recorder” 1. Press to start recording. To stop recording before the recording time is over, press 2. Select “Save” to save the voice clip. .
Organiser Viewing Record Time “Organiser” → “Voice Recorder” → [Options] → “Record Time” 1. Select “For Message” or “Extended Voice”. When selecting “Extended Voice”, you can save the voice clip only in a memory card automatically. Selecting Storage Memory “Organiser” → “Voice Recorder” → [Options] → “Save Recording To” 1. Select the desired location. When selecting “Choice”, you can select the location when saving a voice clip.
Organiser 3. Select the desired option. The options vary depending on the scanned data. “Open Link”: The browser opens the URL. “Copy URL”: The URL is copied. “Send Massage”: The result is sent as SMS or MMS. “Copy”: The result is copied. Using the Scanning Options 1. In the scanning mode, press [Options] and select the desired option. “Scan” Scanning is performed. “Saved Files” The saved files are displayed. “Auto Focus”: Select the focusing option from “Normal”, “Macro” or “Manual Focus”.
Organiser Creating QR Codes You can create QR codes using texts and My Items data. “Organiser” → “Scanner” → “Create QR Code” 1. Select the desired option. “Text Input”: Create a QR code using the text you enter. “My Items”: Create a QR code using the My Items data. 2. Press . Creation of the barcode starts and is displayed on the screen. 3. Press . Tip • You can save the QR code in PNG format. Press [Options] and select “Save”. Scanning Texts “Organiser” → “Scanner” → “Scan Text” 1.
Organiser 5. Press [Options] and select the desired option. “OK”: “Select/Edit”: “Change Mode”: The scanned result is in the text entry screen. The scanned result can be modified. The scanned result can be converted to a web address, mail address, phone number or to roman text. Using the Scanning Options 1. In the scanning mode, press [Options] and select the desired option. “Scan”: Scanning is performed. “Saved Files”: The saved files are displayed.
Organiser Renaming the Scanned Data “Organiser” → “Scanner” → “Scanned Results” 1. Highlight the data you wish to rename. 2. Press [Options] and select “Rename”. Checking the Information of the Scanned Data “Organiser” → “Scanner” → “Scanned Results” 1. Highlight the data the information of which you wish to check. 2. Press [Options] and select “Information”. Stopwatch (M 7-6) You can store 4 lap times when using the stopwatch function. “Organiser” → “Stopwatch” 1. Press to start.
Organiser Tasks (M 7-7) You can register your schedule as task entries which are associated with the date and time. Creating a New Entry “Organiser” → “Tasks” 1. Select “Add New Entry”. 2. Enter the subject. 3. Enter the due date and then due time. 4. Select the reminder option. When selecting “Other”, enter the desired reminder date and time. 5. Select “Description” and enter a memo for the task entry. 6. Select “Secret” and select “On” or “Off” to make it a secret data. 7. Press [Save].
Organiser To Change the Type of Alarm Tone 1. On the Reminder screen, select “Assign Tone/Video”. 2. Select “Assign Tone”. 3. Select “Preset Sounds” or “My Sounds”. 4. Select the desired tone. For details on selecting a tone, see “Assigning a Ringtone” on page 173. To Change the Type of Video 1. On the Reminder screen, select “Assign Tone/Video”. 2. Select “Assign Video”. 3. Select the desired video clip file. To Change the Duration of Alarm Tone or Video 1. On the Reminder screen, select “Duration”. 2.
Organiser Sending a Task Entry “Organiser” → “Tasks” 1. Highlight the task entry you wish to send. 2. Press [Options] and select “Send”. 3. Select the desired option. “As Message”: “Via Bluetooth”: “Via Infrared”: Sends the entry as a message. Sends the entry through Bluetooth connection. Sends the entry through Infrared connection. For “Via Bluetooth” For details, see “Bluetooth” on page 206. For “Via Infrared” For details, see “Infrared” on page 212.
Organiser Deleting Entries “Organiser” → “Tasks” → [Options] → “Delete” 1. Select the desired option. “This Task”: Deletes the selected entry. “All Completed Tasks”: Deletes all checked entries. “All Tasks”: Deletes all entries. World Clock (M 7-8) Setting the Time Zone “Organiser” → “World Clock” 1. Press [Edit]. 2. Select “Set Time Zone”. The current time zone is indicated on the world map. 3. Press c or d to change the time zone. 4. Press 166 .
Organiser To Set the Custom Time Zone “Organiser” → “World Clock” 1. Press [Edit]. 2. Select “Set Time Zone”. The current time zone is indicated on the world map. 3. Press [Options] and select “Set Custom Zone”. 4. Enter the desired city name and time. Setting the Daylight Saving “Organiser” → “World Clock” 1. Press [Edit]. 2. Select “Daylight Saving”. 3. Select “On” or “Off”. Countdown Timer (M 7-9) “Organiser” → “Countdown Timer” 1. Enter the time to count.
Organiser 4. If the countdown has finished, press [Cancel] and then press countdown again. Editing the Countdown Time 1. In the countdown start screen, press [Options] and select “Edit”. 2. Modify the desired time. Expenses Memo (M 7-10) You can record an expenses memo with predefined or edited categories. Recording in the Expenses Memo “Organiser” → “Expenses Memo” → “Add New Expense” 1. Enter the expenses using the digit keys. 2. Select the desired category. Expenses memo is registered.
Organiser To Delete a Recorded Item 1. In the total view, select the desired item. 2. Press [Options] and select “Delete Item”. The selected item is deleted from the list. To Delete All Items 1. In the total view, select the desired item. 2. Press [Options] and select “Delete All”. Editing the Category Name “Organiser” → “Expenses Memo” → “Edit Category” 1. Select the desired category name. 2. Modify the name. Phone Help (M 7-11) You can view the help list and use it to guide you in the phone’s functions.
SIM Application (M 9) You can refer to the information on the SIM/USIM. Contact your service provider for further details.
Settings (M 12) Profiles (M 12-1) Settings Profiles Display Settings Sound Settings Time & Date Language Call Settings Video Call Settings Select Back Activating a Profile “Settings” → “Profiles” 1. Select the desired profile. Note • When a profile is set, the corresponding indicator described on page 29 is displayed during stand-by. Tip • Press and hold R to switch Profiles settings between the mode most recently activated and Silent mode during stand-by.
Settings Resetting Profile Settings “Settings” → “Profiles” 1. Highlight the profile you wish to reset. 2. Press [Options] and select “Set to Default”. 3. Enter your handset code. The default handset code is “9999”. For details on changing the handset code, see “To Change the Handset Code” on page 199. Ringer Volume You can adjust the ringer volume to one of six levels or to an increasing volume. “Settings” → “Profiles” 1. Highlight the profile you wish to customise. 2.
Settings Tip • You can select from two levels or an increasing volume, when selecting the “Silent” profile. Assigning a Ringtone You can select the ringtone from 28 tones including 5 patterns, 13 sound effects and 10 melodies. You can also select a sound in Saved Sounds as the default ringtone excluding the AMR or WAVE format. “Settings” → “Profiles” 1. Highlight the profile you wish to customise. 2. Press [Options] and select “Personalise”. 3. 4. 5. 6. 7. Select “Ringtone/Ringvideos”.
Settings Note • Even if you delete a ringtone that uses a sound in Saved Sounds, the setting remains the same and the default ringtone sounds. If you delete a ringtone assigned for the ringtone, the default ringtone is set. Assigning a Ring Video Clip File You can select a video clip file in Saved Videos as the default ring video clip file. “Settings” → “Profiles” 1. Highlight the profile you wish to customise. 2. Press [Options] and select “Personalise”. 3. 4. 5. 6. Select “Ringtone/Ringvideos”.
Settings Message Notification When receiving messages, your phone will notify you of their arrival with the ringtone or ring video you specify. “Settings” → “Profiles” 1. Highlight the profile you wish to customise. 2. Press [Options] and select “Personalise”. 3. Select “Ringtone/Ringvideos”. 4. Select “For New Message”. 5. Select “Assign Tone” or “Assign Video”. If “Assign Tone” is selected, select “Preset Sounds” or “My Sounds”. 6. Highlight the desired ringtone or ring video clip.
Settings 3. 4. 5. 6. Select “System Sounds”. Select “Keypad Tones”. Highlight the desired tone pattern. Press [Options] and select “Assign”. Vibration When the vibrator option is set on, the phone will vibrate for incoming calls regardless of the ringer volume and ringtone settings. “Settings” → “Profiles” 1. Highlight the profile you wish to customise. 2. Press [Options] and select “Personalise”. 3. Select “Vibration”. 4. Select “On”, “Link to Sound” or “Off”.
Settings External Light Colour You can select from 7 colours and 1 pattern for each profile and change it during an incoming call. “Settings” → “Profiles” 1. Highlight the profile you wish to customise. 2. Press [Options] and select “Personalise”. 3. Select “External Light”. 4. Select “For Voice Call”, “For Video Call” or “For New Message”. 5. Select the desired colour or “Off”. Tip • If you select “Disco” in step 5, all 7 colours flash in order during an incoming call.
Settings Setting the Display (M 12-2) You can change the settings of the main and sub displays. Setting the Main Display Wallpaper For the stand-by screen, 5 pictures are provided. Pictures taken with the digital camera or images downloaded from a WAP site can be used for wallpapers. Setting My Pictures “Settings” → “Display Settings” → “Wallpaper” 1. Select “My Pictures”. 2. Select the desired picture. 3. After displaying the picture, press .
Settings Assigning the Pictures Pictures can be displayed when turning the power on or off, when receiving an incoming call, or when operating the alarm. Pictures taken with the digital camera or images downloaded from a WAP site can be used. To Set Built-in Pictures “Settings” → “Display Settings” → “System Graphics” 1. Select the desired scene to set the picture to. 2. Select “Preset Animation” when you select “Power On” or “Power Off” in step 1.
Settings Note • Some pictures cannot be used because of their picture and data types. • If the picture in My Pictures is already set, it is displayed in step 2. Press [Change] and select the desired picture. Setting the Font Weight You can change the font weight displayed on the screen. “Settings” → “Display Settings” → “Font Settings” 1. Select “Thin”, “Normal”, “Bold” or “Bolder”. The preview image is displayed in the selected weight.
Settings Showing the Clock You can display the calendar or the current date and/or time during stand-by. To Set the Clock Display “Settings” → “Display Settings” → “Clock & Calendar” → “Show Clock” 1. Select the desired clock type or “Off” to set clock display off. Tip • When you select “Calendar”, you can display one or two consecutive calendars by selecting “1 month” or “2 months”. Backlight The backlight will shut off if you do not press the keypad for a certain length of time.
Settings Adjusting the Brightness of the Backlight You can adjust the brightness of the backlight of the screen between 4 levels. “Settings” → “Display Settings” → “Brightness” 1. Press a (Light) and b (Dark) for maximum clarity. 2. Press . Setting the Display Saving The screen of this phone will automatically turn off after a given amount of time. You can change the length of time before the Display Saving goes into effect, which will help conserve battery life.
Settings Setting Video Out With the optional cable, you can connect your phone to other device, such as TVs or videos set to output, and display images or video clips stored on your phone. It is also possible to output and display data stored in the memory card. To Set Output Function On You need to connect your phone to the other device with the optional cable beforehand. “Settings” → “Display Settings” → “Video Output” → “Output” → “On” Select “Off” on the Output screen when finished.
Settings To Select TV System You need to select the appropriate TV system. Refer to the instruction manual of your connected device to confirm the TV system. “Settings” → “Display Settings” → “Video Output” → “TV System” 1. Select the desired item. Setting the Sub Display To Turn On/Off the Sub Display You can turn the sub display on or off when the phone is closed. “Settings” → “Display Settings” → “Sub Display” → “Display On/Off” 1. Select “On” to turn sub display on or “Off” to turn sub display off.
Settings To Set Incoming Indication Caller number or registered caller name can be displayed on the external display when receiving an incoming call. “Settings” → “Display Settings” → “Sub Display” → “Caller Display” Select “On” or “Off”. Sound Settings (M 12-3) You can use this menu to check or edit the current Profiles settings (except “Any Key Answer”). Time & Date (M 12-4) You need to set the correct time and date in order for your phone’s various time-based functions to work correctly.
Settings Selecting the Time Format “Settings” → “Time & Date” → “Time Format” 1. Select “24 Hour” or “12 Hour”. Selecting the Date Format “Settings” → “Time & Date” → “Date Format” 1. Select from “D.M.Y”, “M-D-Y” or “Y/M/D”. Setting the Daylight Saving “Settings” → “Time & Date” → “Daylight Saving” 1. Select “On” or “Off”. Setting the Time Zone “Settings” → “Time & Date” → “Set Time Zone” 1. Press c or d to select the home city to set. 2. Press .
Settings Setting the Calendar Format “Settings” → “Time & Date” → “Calendar Format” 1. Select “Sunday-Saturday” or “Monday-Sunday”. Language Setting (M 12-5) You can change the language that the phone uses to display messages. “Settings” → “Language” 1. Select the desired language. Tip • You can also change the input language on the text entry screen (p. 55). Note • If you select “Automatic” in step 1, the language preset on the SIM/USIM card is selected.
Settings Call Settings (M 12-6) Set various types of functions and services for voice calls. Diverts Note • This service may not be available on all mobile phone networks. Contact your network operator for more information. This service is used to divert incoming calls to your voice mail system or to another phone number depending on certain conditions in which you cannot answer a call. To Divert Calls “Settings” → “Call Settings” → “Diverts” 1.
Settings 3. Enter a phone number to which you wish to divert calls or search for it in the Contacts List (p. 63). 4. Press . 5. Select the period of time from 6 levels (05 to 30 seconds). Note • When a divert is set to “Voice calls” of “All Calls”, “ ” is displayed during stand-by. Tip • If you select “By Service” in step 2, you can select further divert options. To Check the Divert Status “Settings” → “Call Settings” → “Diverts” 1. Select the divert option you wish to check. 2. Select “Status”.
Settings Call Waiting Note • This service may not be available on all mobile phone networks. Contact your network operator for more information. If you wish to be able to receive another incoming call while you have a call in progress, you must activate the Call Waiting service. “Settings” → “Call Settings” → “Call Waiting” 1. Select “On”, “Off” or “Status”. Showing Your Phone Number This lets you control whether to show your phone number when calling another party or not.
Settings Call Information With this setting On, the information of an incoming call is displayed. “Settings” → “Call Settings” → “Display Call Info” 1. Select “On” or “Off”. Restrict Calls This function lets you place restrictions on incoming and outgoing calls. To activate this option you will need the specified password, which is available from your service provider. “Settings” → “Call Settings” → “Restrict Calls” 1. Select from one of the following options: “Outgoing Calls”: Restricts outgoing calls.
Settings (For “Incoming Calls”) “Bar All Incoming Calls”: Restricts all incoming calls. “Bar if Abroad”: Restricts all incoming calls when you are outside of the coverage from your registered network operator. 3. Select one of the following options: (For “Outgoing Calls” and “Incoming Calls”) “All Services”: Restricts all services. “Voice Calls”: Restricts all voice calls. “Video Calls”: Restricts all video calls. “Fax”: Restricts all fax calls. “Messages”: Restricts all messages.
Settings Fixed Dialling No. When the Fixed Dialling No. is enabled, you can only call pre-registered numbers. To Enable Fixed Dialling No. “Settings” → “Call Settings” → “Restrict Calls” → “Fixed Dialling No.” → “Switch On/Off” 1. Select “On” to enable this function. To Add a New Name “Settings” → “Call Settings” → “Restrict Calls” → “Fixed Dialling No.” → “Edit Dial List” 1. Highlight the blank entry, press [Options], then select “Add New Dial”. 2. Enter your PIN2 code. 3. Add a name and a phone number.
Settings To Register the Rejected Number “Settings” → “Call Settings” → “Restrict Calls” → “Rejected Numbers” → “Set Rejecting Number” 1. Select a blank field. 2. Enter the desired number. Changing the Network Password “Settings” → “Call Settings” → “Restrict Calls” → “Change N/W Password” 1. Enter the old network password. 2. Enter a new network password. 3. Enter the new network password again. If you enter the incorrect password, you are asked to enter the password again. . 4.
Settings Video Call Settings (M 12-7) Set various types of functions and services for video calls. Selecting an Image for the Alternative Image You can select your image to be sent through the internal camera from the saved picture files. Turning On or Off the Speakers “Settings” → “Video Call Settings” 1. Select “Loud Speaker On” to turn on the loud speakers on the back of the phone, or select “Loud Speaker Off” to turn them off.
Settings Mute You can mute the microphone while making a video call. “Settings” → “Video Call Settings” → “Mute Microphone” 1. Select “Unmute Microphone” to cancel the mute. Assigning Hold Guidance Picture You can display an image saved in the phone on your main display while you are putting a call on hold. “Settings” → “Video Call Settings” → “Hold Guidance Pict” 1. Select “Preset Picture” or “My Pictures”. 2. Select the desired picture.
Settings Security (M 12-8) Enabling/Disabling the PIN Code If the PIN code is enabled you are asked to enter the PIN code each time the phone is switched on. Your PIN code is registered on the SIM/USIM card and you should have been made aware of the code when you purchased the SIM/USIM card. Contact your service provider for further details. “Settings” → “Security Settings” → “PIN Entry” → “Switch On/Off” 1. Select “On” to enable the PIN code or “Off” to disable. 2. Enter your PIN code.
Settings Changing the PIN2 Code The PIN2 code is used to protect certain functions in the phone such as Fixed Dialling No. and call cost limits. The following shows you how to change the PIN2 code. “Settings” → “Security Settings” → “Change PIN2” 1. Enter the existing PIN2 code. 2. Enter a new PIN2 code. 3. Enter the new PIN2 code again. Handset Lock The Handset Lock is an additional security feature which prevents unauthorised use of the phone or certain features.
Settings To Change the Handset Code Before you change the handset code, select “On” in step 1 in “Handset Lock”. “Settings” → “Security Settings” → “Change Handset Code” 1. Enter the old handset code. 2. Enter a new handset code. 3. Enter the new handset code again. Phone Lock By setting this option on, your phone will lock the keypad until the correct handset code is entered. “Setting” → “Security Setting” → “Phone Lock” 1. Enter your handset code. The default handset code is “9999”.
Settings Showing Secret Data By setting this option on, the hidden data can be displayed. “Settings” → “Security Settings” → “Show Secret Data” 1. Select “On” to display or “Off” to hide. Memory Settings (M 12-9) Viewing the Memory Status “Settings” → “Memory Settings” → “Memory Status” 1. Select from “Handset” or “Memory Card”. The memory status of the selected item is displayed. Formatting Memory Card “Settings” → “Memory Settings” → “Format Card” 1. Enter your handset code.
Settings Master Reset (M 12-10) You can reset M5 and M12 settings or all settings from M1 to M12 and all created data. Resetting M5 and M12 Settings “Settings” → “Master Reset” → “Reset Settings” 1. Enter your handset code. The default handset code is “9999”. For details on changing the handset code, see “To Change the Handset Code” on page 199. Resetting All Settings from M1 to M12 “Settings” → “Master Reset” → “Reset All” 1. Enter your handset code. The default handset code is “9999”.
Call Log (M 11) The phone will record the last 10 missed calls, received calls and dialled numbers. Viewing Call Log “Call Log” 1. Select from “All Calls”, “Dialled Numbers”, “Missed Calls” or “Received Calls”. The selected call log list is displayed. To switch logs, press c or d. 2. Select the phone number you wish to view. If you wish to dial the number, press . Tip • You can also confirm call logs by pressing D during stand-by. Sending Messages 1.
Call Log Deleting a Call Log 1. In the call log list, press [Options] and select “Delete”. Call Timers (M 11-5) This function lets you check the duration of your calls. Checking the Duration of the Last Call and All Calls “Call Log” → “Call Timers” 1. Select “Received Calls” or “Dialled Numbers”. The duration of the last call and all calls is displayed. Resetting Call Timers “Call Log” → “Call Timers” → “Clear Timers” 1. Enter your handset code. The default handset code is “9999”.
Call Log Call Costs (M 11-6) This function lets you check the charges for your calls. Some networks do not support Charging Advice. Please check with your service provider for availability. Checking the Cost of the Last Call “Call Log” → “Call Costs” → “Last Call” The cost of the last call is displayed. Checking the Total Call Cost “Call Log” → “Call Costs” → “All Calls” The cost of all calls is displayed.
Call Log Setting the Charge Limit This function is useful if you wish to make sure you do not exceed a certain charge limit. “Call Log” → “Call Costs” → “Max Cost” → “Set Limit” 1. Enter your PIN2 code. 2. Enter a value. Checking the Residual Credit “Call Log” → “Call Costs” → “Residual Credit” Resetting All Call Costs “Call Log” → “Call Costs” → “Clear Costs” 1. Enter your PIN2 code.
Connectivity (M 10) By configuring the settings in this menu, you can connect to Bluetooth wireless technology or infrared enabled phones via these connections, as well as a PC via Bluetooth wireless technology or infrared connections. Bluetooth (M 10-1) For using the Bluetooth wireless function, you need to search for other Bluetooth wireless technology enabled devices to establish contact with your phone. Keep your phone within a distance of 10 metres before searching.
Connectivity To Search for Devices to be Paired “Connectivity” → “Bluetooth” → “Search for Devices” The phone starts searching for devices within 10 metres. A maximum of 16 devices can be searched for and listed on the displayed. 1. Select the desired device for pairing. 2. Enter the device passcode. Note • If the Bluetooth wireless function is off before searching, the phone turns the Bluetooth wireless function on automatically and starts searching. • You can only select one device for pairing.
Connectivity Tip • You can save battery power by turning the Bluetooth wireless function off while it is not in use. Turn the Bluetooth wireless function off in “To Turn On or Off” on page 206 or in “To Turn Off Automatically” on page 211. • During a call, you can divert voice calls to the paired device. Press [Options] and select “Enable Bluetooth” or “Disable Bluetooth”. If you wish to disconnect the paired device, select “Off”. To Rename a Device “Connectivity” → “Bluetooth” → “Handsfree Devices” 1.
Connectivity Paired Devices You can rename and delete the paired device in the list. “Connectivity” → “Bluetooth” → “Paired Devices” 1. Highlight the desired device. 2. Press [Options]. 3. Select “Change Name” or “Delete”. You can rename or delete by pressing after selecting desired device. To Send All Data to Other Devices You can send all the data for applications such as Contacts List, Calendar, Tasks or etc. to selected devices. “Connectivity” → “Bluetooth” → “Send All” 1. Select the desired device.
Connectivity 3. Enter the device passcode for unpaired devices. 4. Select the desired data to send. Note • If the handsfree device is connected, the confirmation screen to deactivate the handsfree function is displayed. Press [Yes] to deactivate. Bluetooth Wireless Settings With this setting you can rename your phone, prevent other phones from recognising your phone, turn the Bluetooth wireless function off automatically to save battery power, etc. To Rename Your Phone You can rename your phone.
Connectivity To Turn Off Automatically “Connectivity” → “Bluetooth” → “Bluetooth Settings” → “Bluetooth Timeout” 1. Select the desired time. Your phone turns the function off automatically in the specified time. To Switch the Handsfree Settings You can switch modes of the handsfree kit between two modes; talking with the handsfree kit or talking with the phone. “Connectivity” → “Bluetooth” → “Bluetooth Settings” → “Handsfree Setting” 1. Select “Private mode” or “Handsfree mode”.
Connectivity Infrared (M 10-2) In order to use the infrared function, you need to search for other infrared enabled devices to establish contact with your phone. Keep your phone within a distance of 20 centimetres before searching. The infrared setting will return to off when no data is transmitted/received via infrared communication. Turning On or Off “Connectivity” → “Infrared” → “Switch On/Off” 1. Select “On” or “Off”. The infrared setting is activated, and “ ” is displayed.
Connectivity Network Settings (M 10-3) System Settings To Select a System Automatically Each time the power is turned on, your phone always performs the selected system. “Connectivity” → “Network Settings” → “System Settings” 1. Select “Auto”. To Set the System Manually “Connectivity” → “Network Settings” → “System Settings” 1. Select “GSM”. Network Settings To Select a Network Automatically Each time the power is turned on, your phone always tries to connect to the preferred network.
Connectivity To Set the Network Manually “Connectivity” → “Network Settings” → “Network Settings” → “Select Network” → “Manual” 1. Select the desired network. To Add a New Network “Connectivity” → “Network Settings” → “Network Settings” → “Select Network” → “Add New Network” If there are no entries, press and go to step 2. If there is an entry, press and perform the following steps. 1. Select “Add”. 2. Enter the country code. Up to 3 digits code can be entered. 3. Enter the network code.
Connectivity To Change the Position of a Network in the Preferred List “Connectivity” → “Network Settings” → “Network Settings” → “Select Network” → “Set Preferred” 1. Select the name of the network you wish to change the position in the list. 2. Select “Insert” to insert over the selected position or “Add to end” to insert at the end. To Delete a Network from the Preferred List “Connectivity” → “Network Settings” → “Network Settings” → “Select Network” → “Set Preferred” 1.
Connectivity Internet Settings (M 10-4) Note • In normal operations, you do not need to change the settings. • Internet settings have already been made in your phone depending on your network operator. You may have restrictions on viewing, deleting, copying or modifying the settings. Contact your network operator for details.
Connectivity “Connectivity” → “Internet Settings” → “Re-Provisioning Settings” Re-Provisioning Settings “Execute Pending”: Updates provisioning data. “Connectivity” → “Internet Settings” → “Clear DNS Cache” Clears the DNS cache.
Connectivity Email Settings “Account Name”: “POP3”: “SMTP”: “Access Point”: “Email Address”: Streaming Settings “Profile Name”: “Proxy Address”: “Port Number”: “Access Point”: Email account name (Unique name) Server name, user ID, password and port number for POP3 server Server name, user ID, password, port number for SMTP server and SMTP Authentication Access point for email Email address Profile name for streaming (Unique name) Proxy address Port number (1-65535) Access point To Activate the WAP/MMS/Ema
Connectivity To Edit the WAP/MMS/Email/Streaming Profile “Connectivity” → “Internet Settings” → “Application” 1. Select “WAP Settings”, “MMS Settings”, “Email Settings” or “Streaming Settings”. 2. Highlight the desired profile. 3. Press [Options] and select “Edit”. 4. Edit the desired item. To Copy the WAP/MMS/Email/Streaming Profile “Connectivity” → “Internet Settings” → “Application” 1. Select “WAP Settings”, “MMS Settings”, “Email Settings” or “Streaming Settings”. 2. Highlight the desired profile. 3.
Connectivity Backup/Restore (M 10-5) With a memory card inserted in your phone, you can make backup files of Bookmarks, Text, Contacts, Calendar and Tasks in the handset memory card to the memory card. You can also restore the backup data from the memory card. Making a Backup File on the Memory Card “Connectivity” → “Backup/Restore” → “Backup” 1. Enter your handset code. The default handset code is “9999”. For details on changing the handset code, see “To Change the Handset Code” on page 199. 2.
Connectivity Restoring a Backup File “Connectivity” → “Backup/Restore” → “Restore” 1. Enter your handset code. 2. Press [OK]. 3. Select the desired item. 4. Select the desired file to restore. A confirmation message indicates deletion from the memory card is displayed on the screen. 5. Press [Yes]. To Restore All Files “Connectivity” → “Backup/Restore” → “Restore” 1. Enter your handset code. 2. Press [OK]. 3. Select “Select All”.
Connectivity To Delete a Backup File “Connectivity” → “Backup/Restore” → “Restore” 1. Enter your handset code. 2. Press [OK]. 3. Select the desired item. 4. Highlight the desired file. 5. Press [Options] and select “Delete”. A confirmation message to delete the selected file is displayed on the screen. 6. Press [Yes].
Connecting 902SH to Your PC You can use the following functions by connecting the 902SH to your PC using an infrared port, USB port* or Bluetooth wireless technology port: • 3G/GSM GPRS modem • Handset Manager for 902SH * Requires an optional USB data cable XN-1DC30 for USB port connection. System Requirements Operating System: Windows® 98*, Windows® Me, Windows® 2000**, Windows® XP*** * Windows® 98 Second Edition, Windows® 98 Service Pack 1 with Internet Explorer 5.
Connecting 902SH to Your PC 3G/GSM GPRS Modem You can use 902SH as a 3G/GSM GPRS modem to access the Internet from your PC. Connect your phone to your PC via Bluetooth wireless technology or USB interface. Software installation on your PC is required. For details, see “Software Installation” on page 225. Modem via the USB Cable To use the modem function using a USB cable, use the cable mentioned above and see the instructions accompanying the cable.
Connecting 902SH to Your PC Handset Manager You can transmit the following items between your phone and your PC, and can use Contacts List entries on your PC: • My Items files (pictures/sounds/video clips/Other Documents data) • Contacts List entries • Schedule entries To use the Handset Manager function, see “Connecting 902SH to Your PC” on page 223 and set your phone to Data Transfer mode. For details on software support, refer to the following site: http://www.sharp-mobile.com Software Installation 1.
Connecting 902SH to Your PC Note • The phone may not recognise the USB data cable if it is connected while an application (Camera, My Items, etc.) is running. Connect the USB data cable during stand-by. Infrared communication • Infrared ports need to be aligned with each other. • Infrared ports need to be placed within 20 cm of each other and within a 30° angle. 3G/GSM GPRS modem • It is not recommended that you make or answer calls when you are using 902SH as a 3G/GSM GPRS modem.
Troubleshooting Problem The phone does not turn on. PIN code or PIN2 code is rejected. The SIM/USIM card becomes locked. Solution • • • • • • Phone functions do not work after the phone is turned on. • • • • • Calls cannot be made or received. • • The display is difficult to read. Call quality is poor. • • Make sure the battery is properly inserted and charged. Make sure you have entered the correct code (4 to 8 digits).
Troubleshooting Problem Cannot access network service. Cannot send or receive text message. Cannot connect to Multimedia Messaging Service provider. Limited memory available. Call is terminated unexpectedly. No entries are displayed in the Contacts List. Fax transmission failure Cannot receive OBEX data. 228 Solution • Check where your account has been registered and where the service is available.
Safety Precautions and Conditions of Use Your phone conforms to international regulations insofar as it is used under normal conditions and in accordance with the following instructions. CONDITIONS OF USE Electromagnetic waves • Do not switch on your phone aboard an aircraft (as your phone may interfere with the aircraft’s electronic systems). Current legislation forbids this use and legal action can be taken against the user. • Do not switch on your phone in a hospital, except in designated areas.
Safety Precautions and Conditions of Use Caring for your phone • Do not allow children to use your phone without supervision. • Do not open or attempt to repair your phone yourself. The product can only be repaired by authorised service personnel. • Do not drop your phone or subject it to severe impacts. Bending the body and pushing the display or keys with extreme force could damage the phone. • Do not use solvents to clean your phone. Use only a soft, dry cloth.
Safety Precautions and Conditions of Use Battery • Use your phone only with batteries, chargers and accessories recommended by the manufacturer. The manufacturer disclaims any liability for damage caused by the use of other chargers, batteries or accessories. • Network configuration and phone usage will affect talk-time and stand-by time. Using the games or camera will hasten battery consumption. • When the battery charging alert is displayed on the screen, charge the battery as soon as possible.
Safety Precautions and Conditions of Use • The battery can be charged and discharged hundreds of times but it will eventually wear out. When the operating time (talk-time and stand-by time) is noticeably shorter than normal, it is time to buy a new battery. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE, DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS See “Battery Disposal” on page 21. Aerial Care • Do not cover the top of the phone (p. 17, No.
Safety Precautions and Conditions of Use • Use only the aerial supplied or one approved by Sharp for your mobile phone. Using unauthorised or modified aerials may damage the mobile phone. Moreover, since the mobile phone may violate the appropriate regulations, it may lose performance or exceed the limitation of SAR levels. • To avoid impaired performance, do not damage the aerial of the mobile phone.
Safety Precautions and Conditions of Use Camera Operation • Learn picture quality, file formats, etc. beforehand. The taken pictures can be saved in JPEG format. • Be careful not to move your hand while taking pictures. If the phone moves while taking a picture, the picture can become blurred. When taking a picture, hold the phone firmly to prevent it from moving, or use the delay timer. • Clean the lens cover before taking a picture. Fingerprints, oils, etc. on the lens cover hinder clear focusing.
Safety Precautions and Conditions of Use • Before connecting the phone with a PC or a peripheral unit, read the operation manual for the other unit carefully. • If the phone’s battery has been removed for some time, or the phone has been reset, the unit’s clock and calendar may be reinitialised. The date and time should be updated in this case. ENVIRONMENT • Keep your phone away from extreme heat. Do not leave it on the dashboard of a car or near a heater.
Safety Precautions and Conditions of Use PRECAUTIONS CONCERNING VEHICLE USE • It is the user’s responsibility to check the local laws governing the use of a mobile phone in vehicles. Pay full attention to driving. Pull off to the side of the road, park the car, and switch off the engine before making or answering a call. • Use of your phone’s function may interfere with the vehicle’s electronic systems, such as the ABS anti-lock brakes or the air-bag.
Safety Precautions and Conditions of Use SAR Your Sharp mobile phone has been designed, manufactured and tested so as not to exceed the limits for exposure to electromagnetic fields recommended by the Council of the European Union. These limits are part of comprehensive guidelines developed by independent scientific organisations.
Safety Precautions and Conditions of Use PRECAUTIONS FOR USE IN USA FCC Declaration of Conformity This mobile phone 902SH with PC/Data interface cable XN-1DC30 complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Safety Precautions and Conditions of Use However, there is no guarantee that interference will not occur in a particular installation; if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1. Reorient/Relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3.
Safety Precautions and Conditions of Use The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg.* Tests for SAR are conducted using standard operating positions specified by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands.
Safety Precautions and Conditions of Use The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID APYHRO00038.
Specifications and Optional Accessories Specifications Weight: Dimensions (W × H × D): Battery: Approximately 149 g (with battery) Approximately 50 × 102 × 26 mm (without protruding parts) Lithium Ion, 3.
Index Symbols #/Flash Light Key 16 * /Shift Key 14 A Alarms 153 Resetting 155 Setting 153 Area Info 100 Enabling/Disabling 100 B Backup/Restore 220 Making a Backup File 220 Restoring a Backup File 221 Battery 20 Charging 22 Disposal 21 Inserting 20 Removing 21 Battery Cover 17 Battery Level Indicator 23 Bluetooth Wireless Function 206 Built-in Aerial 17 C Calculator 155 Calendar Creating 149 Deleting Schedule Entries 152 Editing a Schedule Entry 151 Receiving a Schedule Entry 151 Sending a Schedule Ent
Index Subscribing 99 Centre Key 14, 29 Characters 53 Changing the Input Languages 55 Changing the Input Mode 55 Using Templates 57 Clear/Back Key 15 Conditions of Use 229 Connectivity 206 Bluetooth 206 Infrared 212 Internet Settings 216 Network Settings 213 Contacts List 59 Assigning a Ringtone or a Ring Video Clip 66 Changing the List 60 Changing the List Order 61 Changing the Name Order 60 Copying 63 Creating 61 Deleting 64 Dialling 63 Editing 64 Finding 63 Manage Group 65 Memory Status 67 Receiving 69 Se
Index Handset Lock 198 I Incall Menu (Video Call) 47 Changing the Image of Yourself 47 Muting the Microphone 47 Swapping Images 47 Turning the Speakers On and Off 48 Using the Optical Zoom Function 48 Video Call Settings 49 Incall Menu (Voice Call) 40 Accessing SMS/MMS Menu during a Call 41 Adjusting the Earpiece Volume 40 Call Waiting 42 Conference Call 42 Muting the Microphone 44 Putting a Call on Hold 41 Turning the Speakers On and Off 40 Infrared 212 Infrared Port 18 International Calls 37 Internet Se
Index O Organiser 149 Alarms 153 Calculator 155 Calendar 149 Countdown Timer 167 Expenses Memo 168 Phone Help 169 Scanner 158 Stopwatch 162 Tasks 163 Voice Recorder 157 World Clock 166 P PC Connection 223 3G/GSM GPRS Modem 224 Handset Manager 225 Software Installation 225 System Requirements 223 Phone Help 169 Pictures Adjusting the Size 120 Downloading 124 Editing 119 Operating 121 Saving to Contacts List Entries 119 Sending a Picture File 121 Switching the Memory Source 118 Uploading 123 246 Viewing 1
Index T Tasks Creating 163 Deleting 166 Editing 164 Sending 165 Setting the Alarm 163 Viewing the Memory Status 165 Time & Date 185 Customising the Time Zone 186 Selecting the Date Format 186 Selecting the Time Format 186 Setting the Calendar Format 187 Setting the Daylight Saving 186 Setting the Time Zone 186 Troubleshooting 227 V Video Call Answering 46 Letting the Caller Know You are Unavailable 46 Making 45 Rejecting 46 Status Indicators 45 Video Call Settings 49, 195 Assigning Hold Guidance Picture
List of Menu Functions Menu No./ Main Menu 1 Games & More 2 3 Vodafone live! Media Player 4 5 6 248 Messages Menu No./ Sub Menu1 1 2 3 4 Games Screensavers Settings Java™ Information 1 2 3 4 5 6 7 8 9 10 11 12 13 Create New Inbox Drafts Templates Sent Outbox live! Studio Messenger Voice Mail Cell Broadcasts Area Info Settings Memory Status 7 Organiser 8 Contacts 9 SIM Application 10 Connectivity Camera My Items Menu No.
List of Menu Functions Menu No./ Main Menu 11 Call Log 12 Settings Menu No.