Operation Manual

ENGLISH
E-1
ENGLISH
Thank you for purchasing a SHARP air conditioner. Please read this manual carefully
before operating the product.
• PRECAUTIONS .............................................E-1
• PART NAMES................................................E-3
• SETTING DUST COLLECTING FILTER
AND DEODORANT FILTER ..........................E-5
• USING THE REMOTE CONTROL ................E-6
• BASIC OPERATION ......................................E-8
• ADJUSTING THE AIR FLOW DIRECTION ...E-10
• FULL POWER OPERATION .........................E-11
• ONE-HOUR OFF TIMER ...............................E-11
• TIPS ABOUT PLASMACLUSTER OPERATION ... E-12
CONTENTS
• PLASMACLUSTER OPERATION ..... E-13
• SELF CLEAN OPERATION ............... E-13
• TIMER OPERATION.......................... E-14
• AUXILIARY MODE ............................ E-16
• POWER SELECTOR ......................... E-16
• ADDITIONAL NOTES ON OPERATION ... E-17
• TIPS ON SAVING ENERGY .............. E-17
• MAINTENANCE ................................. E-18
• BEFORE CALLING FOR SERVICE .. E-20
WARNINGS FOR USE
1
Do not pull or deform the power supply cord. Pulling and misuse of the power supply cord
can result in damage to the unit and cause electrical shock.
2
Be careful not to expose your body directly to the outlet air for a long time. It may affect
your physical conditions.
3
When using the air conditioner for infants, children, elderly, bedridden, or disabled people
make sure the room temperature is suitable for those in the room.
4
Never insert objects into the unit. Inserting objects can result in injury due to the high
speed rotation of internal fans.
5
Ground the air conditioner without fail. Do not connect the grounding wire to gas pipe,
water pipe, lightning rod or telephone grounding wire. Incomplete grounding may cause
electric shock.
6
If anything is abnormal with the air conditioner (ex. a burning smell), stop the operation
immediately and turn the circuit breaker OFF.
7
Follow local rules and regulations for power supply cord cabling. Improper cable
connection can cause the power supply cord, plug and the electrical outlet to overheat
and cause fire.
8
Use only the manufacture-specified power cord for replacement. Replacement should be
performed by a qualified technician or a service person.
WARNINGS FOR INSTALLATION / REMOVAL / REPAIR
• Do not attempt to install/remove/repair the unit by yourself. Incorrect work will cause electric
shock, water leak, fire etc. Consult your dealer or other qualified service personnel for the
installation/removal/repair of the unit.
This equipment complies with the requirements of Directives 89/336/EEC and 73/23/
EEC as amended by 93/68/EEC.
PRECAUTIONS