Operation Manual

E-14

AUXILIARY MODE

Use this mode when the remote control is not available.

TO TURN ON

Lift the front panel of the indoor unit and press the AUX.

button on the operation panel.

• The red OPERATION lamp (

) on the unit will light and

the unit will start operating in the AUTO mode.

• The fan speed and temperature setting are set to AUTO.

TO TURN OFF

Press the AUX. button on the operation panel again.

• The red OPERATION lamp (

) on the unit will turn off.

NOTE:

If the AUX. button is pressed during normal operation, the

unit will turn off.

POWER SELECTOR (only for models AY-X13CR/AH-X13CR)

When installing the air-conditioner to a residence with small

electrical current capacity, switch the POWER SELECTOR to

"L". The air conditioner will operate with reduced power, and

the circuit breaker tripping or fuse blowing caused by excess

power consumption can be avoided.

• COOLING or HEATING (for model AY-X13CR) capacity

will be reduced when operating at "L" setting.

• Consult your dealer or qualified technician if continuous

breaker tripping or fuse blowing is experienced even by

switching to "L" setting.

AH-X13CR AY-X13CR

Maximum ampere

9A 12A

at "H" setting

Maximum ampere

7A 8A

at "L" setting

OPTION KIT

Air Purifying Filter

During operation of the air conditioner, the air purifying filter

removes dust and tobacco smoke from the air and discharges

clean air.

The apatite antibacterial material used in the air purifying filter

suppresses activities of adsorbed viruses and other germs.

The replacement period for the disposable type is approximately

3~6 months.

Contact your dealer for the purchase of this option.

Type AZ-F900B

AUX.