Operation Manual, Software Setup Guide

12
Install the driver using an existing port
Install the driver using an existing port on your computer. You can also create a new port.
1
Select [Use an existing port] and click the [Next]
button.
Refer to "Custom installation (page 7)" on how to display the
custom installation screen.
2
When the model selection window appears,
select the model name of your machine and
click the [Next] button.
You can filter the list by part of the model name, color type,
or speed.
3
Select the port.
You can click a [Port] that you want to change in the list
and select the desired port.
To create a new port, click [Add Port]. For detailed
procedures, refer to Step 4 onwards of "Changing the port
(page 15)".
4
Follow the instructions on the screen and
proceed with installation.
For detailed procedures, refer to Step 5 onwards of
"Installation by specifying the machine's address (page 8)".
This completes the installation.
Related topics
Windows / Select the software to be installed (P. 3)
Enable options and peripherals (P. 14)
Changing the port (P. 15)
Troubleshooting
The software cannot be installed (P. 22)
Table of contents
Windows / Select the software to be installed
Installing the printer driver / PC-Fax driver (common procedure)
Custom installation