Operation Manual, User's Manual
5-83
SCANNER/INTERNET FAX►OTHER FUNCTIONS
4
Specify the destination.
► RETRIEVING A DESTINATION FROM AN ADDRESS BOOK (page 5-15)
► VIEWING A LIST OF THE SELECTED DESTINATIONS (page 5-19)
► USING A SEARCH NUMBER TO RETRIEVE A DESTINATION (page 5-20)
► ENTERING AN ADDRESS MANUALLY (page 5-21)
► SPECIFYING A NETWORK FOLDER (page 5-22)
► RETRIEVING A DESTINATION FROM A GLOBAL ADDRESS BOOK (page 5-24)
► USING A TRANSMISSION LOG TO RESEND (page 5-26)
5
Tap the [Others] key, and tap the [Business Card Scan] key.
6
Tap the [On] key, and change settings
as needed.
When you have completed the settings, tap the key and
then the [Back] key.
• If original count is enabled, the number of scanned originals will appear during scanning.
• Change the language setting to match the language used on the business card. For the language settings, refer to
"CHANGING FORMAT IN SCAN OR DAT
A ENTRY MODE (page 5-61)
".
• To use the full name as the file name, enable [Use Full Name on Card as the File Name].
• To send the scanned image file together with the file format selected in [File Format], enable [Also Send Image].
• When setting [Card Information] or [Image and Card Info] using the automatic document feeder, do not scan both
vertical and horizontal business cards at the same time.
To cancel the business card scan setting
Tap the [Off] key.
Business Card Scan
Others
Off
Image
Card Information
Image and Card Info
Preview
Start
Back
vCard (*.vcf)File Format
Language
Setting
English
Original
Original Count
CA
Use Full Name on Card
as the File Name