Specifications

Power source GPD cells for fast light response, with tri-colored LED exposure
read-out, rapid wind lever and shutter release button acting as
meter
switch. Exposure range: EV1 - 19 (ASA100, f/1.4), Film speed
range: ASA25. 1600.
Two 1.5V silver oxide batteries (G13); LED's double as battery
check lamp.
Back cover Standard back with memo holder, interchangeable with Magazine
Body size Back MX, Dial Data MX for data recording on film.
135.5mm x 82.5mm x 49.5mm.
Body weight 495 grams.
LENS MOUNTING INSERTING BATTERIES
1. Remove the rear lens and body caps.
2. Match the red dot on the camera body with the red dot on the lens. Insert the
lens into the body and turn it clockwise until the lens locks with a click.
3. In the dark, when the red dots are difficult to see, align the upraised white
dot on the lens barrel with the lens release lever by touch. Then turn and lock
as above.
4. To detach, hold the camera with your left hand. Depress the lens release
lever while turning the lens counterclockwise with your right hand. www.4butkus.org
CAUTION: If you have to put the lens down
without the rear lens cap, place place it front-
element down never front element up.