User Manual

ManualsBrandsSHARP ManualsAir ConditionerAF-W12CME

INSTALLATION AND OPERATION

MANUAL

ROOM AIR CONDITIONER

Thank you for purchasing a SHARP air conditioner.

Please read this manual carefully before installing or

operating the product.

The manual should be kept in a safe place for handy

reference.

AF-W12CME

PAGE

CONTENTS

OPERATION INSTRUCTIONS

• PRECAUTIONS ........................................ 2

• ADDITIONAL NOTES ON OPERATION .. 3

• CONTROLS .............................................. 4

• USING THE REMOTE CONTROL ........... 5

• BASIC OPERATION ................................. 6

• AIR FLOW AND VENTILATION ............... 7

• TIMER OPERATION................................. 8

• SAVE OPERATION .................................. 10

• ONE-HOUR OFF TIMER .......................... 10

• AUXILIARY MODE ................................... 11

• MAINTENANCE ........................................ 12

• BEFORE CALLING FOR SERVICE ......... 13

INSTALLATION INSTRUCTIONS

• PART NAMES AND DIMENSIONS .......... 14

• ITEMS PACKED WITH THIS UNIT .......... 14

• LOCATION................................................ 15

• POWER CABLING.................................... 15

• INSTALLATION ........................................ 16

Summary of content (20 pages)

PAGE 1
AF-W12CME ROOM AIR CONDITIONER INSTALLATION AND OPERATION MANUAL CONTENTS PAGE OPERATION INSTRUCTIONS • PRECAUTIONS ........................................ 2 • ADDITIONAL NOTES ON OPERATION .. 3 • CONTROLS .............................................. 4 • USING THE REMOTE CONTROL ........... 5 • BASIC OPERATION ................................. 6 • AIR FLOW AND VENTILATION ............... 7 • TIMER OPERATION................................. 8 • SAVE OPERATION ..................................
PAGE 2
OPERATION INSTRUCTIONS PRECAUTIONS WARNINGS FOR USE 1 2 3 4 5 Do not pull or deform the power supply cord. Pulling and misuse of the power supply cord can result in damage to the unit and cause electrical shock. Be careful not to expose your body directly to the outlet air for a long time. It may affect your physical conditions. When using the air conditioner for infants, children, elderly, bedridden, or disabled people make sure the room temperature is suitable for those in the room.
PAGE 3
PRECAUTIONS 7 8 9 Be sure to stop the operation and turn the circuit breaker off before performing any maintenance or cleaning. A fan is rotating inside the unit and you may get injured. Do not splash or pour water directly on the unit. Water can cause electrical shock or equipment damage. This appliance is not intended for use by young children or infirm persons without supervision. Young children should be supervised to ensure that they do not play with the appliance.
PAGE 4
CONTROLS UNIT 6 2 3 4 1 Control panel 2 Reciever Window 3 Operation Lamp (Red) 4 Timer Lamp (Yellow) 5 AUX. Button 6 Ventilation lever 5 1 REMOTE CONTROL 1 TRANSMITTER 1 2 DISPLAY (Liquid Crystal Display) 3 ON/OFF Button 4 THERMO. (Thermostat) Button 2 FAN TIMER 5 SAVE Button 6 MODE Button 3 7 TIMER ON Button (for setting the timer) 8 ONE-HOUR OFF TIMER Button 4 9 TIMER OFF Button (for setting the timer) 5 6 10 FAN Button 8 11 TIMER CANCEL Button 10 12 SWING Button 7 9 11 12 L.C.D.
PAGE 5
USING THE REMOTE CONTROL INSTALLING BATTERIES Use two size-AAA (R03) batteries. the battery cover at the 1 Remove back of the remote control. batteries in the compart2 Insert ment, making sure the and Battery cover polarities are correctly aligned. • Lines will be indicated on the display when batteries are properly installed. 3 Reinstall the battery cover. MODE TEMP. FAN TIMER NOTES: • The battery life is approximately one year with normal use.
PAGE 6
BASIC OPERATION MODE FAN TEMP. TIMER TEMP. SAVE MODE 1H FAN SWING CANCEL 1 Press the MODE button to select the operation mode.AUTO COOL DRY 2 Press the ON/OFF button to start operation. • The red OPERATION lamp on the unit will light up. 3 2 5 3 1 4 4 Press the THERMO. button to set the desired temperature.
PAGE 7
AIR FLOW AND VENTILATION LEFT/RIGHT AIR FLOW ADJUSTMENT Adjust the louvers to change the direction of air flow. Press the SWING button on the remote control, and the Left/Right air flow adjustment louvers will swing continuously. Press the button again to stop. You can adjust the air flow to your desired direction. Never attempt to move the Left/Right air flow adjustment louvers manually, or manually force the louver movement to stop during swing operation.
PAGE 8
TIMER OPERATION TIMER OFF The unit will turn off automatically according to your setting. Timer duration can be set from minimum 0.5 hours (30 minutes) to maximum 12 hours. Up to 9.5 hours, you can set by 0.5 hours (30 minutes) increments and from 10 to 12 hours, by 1 hour increment. MODE TEMP. FAN TIMER TEMP. SAVE MODE 1H FAN SWING CANCEL the TIMER OFF ( 1 Press time as desired. ) button and set • The time setting will change as you to press the button as follows, 0.5H 1.0H 1.
PAGE 9
TIMER ON The unit will turn on automatically according to your setting. Timer duration can be set from minimum 0.5 hours (30 minutes) to maximum 12 hours. Up to 9.5 hours, you can set by 0.5 hours (30 minutes) increments and from 10 to 12 hours, by 1 hour increment. MODE the TIMER ON ( ) button. 1 Press • The time setting will change as you press the TEMP. button as follows. FAN 0.5H 1.0H 1.5H TIMER TEMP. SAVE MODE 1H FAN 10H 11H 12H Hold the button pressed down for fast setting.
PAGE 10
SAVE OPERATION With the SAVE operation, the temperature setting rises 1°C higher than the original thermostat setting. It offers you efficient and economical operation when used during seasons and hours with low outdoor temperature, such as night time. MODE the SAVE button during operation. 1 Press • The remote control displays “SAVE”. TEMP. TO CANCEL FAN TIMER TEMP. SAVE MODE 1H FAN Press the SAVE button again.
PAGE 11
AUXILIARY MODE Use this mode when the remote control is not available. TO TURN ON Press the AUX. button on the unit's control panel. • The red OPERATION lamp on the unit will light up and the unit will start operating in the AUTO mode. • The fan speed and temperature setting are set to AUTO. • Left/Right air flow adjustment louvers will swing continuously. TO TURN OFF )7: Press the AUX. button on the control panel again. • The red OPERATION lamp on the unit will go out. NOTE: If the AUX.
PAGE 12
MAINTENANCE Be sure to disconnect the power cord from the wall outlet or turn off the circuit breaker before performing any maintenance. CLEANING THE FILTER If the filter is clogged with dust, the amount of air flow will be reduced, resulting in poor cooling performance. The filter should be cleaned every10 days. At the beginning of every cooling season or if the air conditioner has not been used for a long period, clean the filter before starting to operate the unit. 1.
PAGE 13
BEFORE CALLING FOR SERVlCE IF YOUR AIR CONDITIONER DOES NOT OPERATE PROPERLY, PLEASE CHECK THE FOLLOWING ITEMS BEFORE CALLING FOR SERVICE.
PAGE 14
INSTALLATION INSTRUCTIONS PART NAMES AND DIMENSIONS 1 Front panel 2 Grille 3 Air filter (behind the grille) 4 Up/Down air flow adjustment louvers 5 Left/Right air flow adjustment louvers 6 Cabinet 7 Ventilation lever 8 Control panel 9 Stopper screws (on left and right side) 10 Power cord 11 Remote control , * ) + DIMENSIONS 560 A (mm) 375 B (mm) 600 (center 610) C (mm) D (mm) 255 E (mm) 30 (center 40) We reserve the right to change the materials and specifications without notice.
PAGE 15
LOCATION The appliance shall be installed in accordance with national wiring regulations. Improper connection may cause the power cord, and the electrical outlet to overheat and fire. Install the air conditioner to the opening dimensions shown below. Never install the unit where any of the air inlet is blocked. The air conditioner should be installed with a strong external support to minimize noise and vibration, and for the purpose of safe installation, repair, replacement and secure positioning.
PAGE 16
INSTALLATION INSTALLATION WARNING: Turn off and disconnect the unit before working. 1 Grille (1) Open the grille (Fig.1) by gently pulling the arrow marked portion. Remove the air filter (Fig.2) from the front panel. Unscrew the screw fixing the front panel to the chassis. (Fig.2) Keep the screw as it will be used later. Fig.1 Air filter 2 1 Front panel Fig.2 CAUTION: Do not open the grille extremely wide, or provide stress to the opened grille.
PAGE 17
3 Attach the provided drain tray to the cabinet in case drainage becomes necessary. Use the 2 short gold screws (1.2cm/0.5") to fix it. (Fig.5) Raised portion Drain tray can be attached in three directions according to the installation location of the air conditioner unit. Attach drain tray in direction that its brim will not hit upon the raised of cabinet edge. Fig.5-1 Fig.5 Drain tray Cabinet Fig.5-2 Fig.
PAGE 18
INSTALLATION WARNING: At this step, make sure the cabinet is inclined approximately 1cm (3/8") to the back (Fig.9). If the cabinet is not properly inclined, the water collected in the bottom tray during operation will not drain properly and may flow into the room where the air conditioner is installed. cabinet mounting frame incline backwards about 1cm (3/8") Fig.9 (3) Cut the gasket to an appropriate length and stuff it into the gap around the mounting frame and the unit to seal outside air. (Fig.
PAGE 19
PAGE 20
SHARP CORPORATION Printed in Egypt TINS-A780JBRZ 04B- 1 20