Use and Care Manual

USING YOUR AIR CONDITIONER
Remote Control
1. ON/OFF - Press the ON/OFF button to turn the A/C
on or off. When the unit is turned off, the Timer and
sleep functions will be cancelled. The set tempera-
ture will be saved.
2. MODE - Press the MODE button to change the
operating mode. You can choose AUTO, COOL,
SAVE (energy saver), FAN only, or Dry
(Dehumidifier). The temperature will not be
displayed when AUTO mode is selected.
3. “—” - Press the “-” button to decrease the
temperature when the unit is on. Press and hold
the “-” button for more than 2 seconds to quickly
cycle through the temperature options. Stop
pressing the button when the desired temperature
is displayed. The temperature cannot be set in auto
mode. Temperature range: 61°F - 86°F.
4. “+” - Press the “+” button to increase the tempera-
ture when the unit is on. Press and hold the “+”
button for more than 2 seconds to quickly cycle
through the temperature options. Stop pressing the
button when the desired temperature is displayed.
The temperature cannot be set in auto mode.
Temperature range: 61°F - 86°F.
5. FAN - Press the FAN button to turn change the
FAN options. You can choose between four
speeds and auto mode. The fourth fan option is
only available in cooling and energy saver modes.
6. IFEEL MODE - Press the IFEEL button to change
the thermostat sensor from the air conditioner to
the remote location. The air conditioner will cool
the area depending on the location and set
temperature of the remote control. Take the remote
control with you so the air conditioner cools the
room to your location. The Remote must be in line
of site of the A/C for iFeel to operate correctly.
7. SLEEP MODE - Press the SLEEP button to turn
SLEEP mode on or off. SLEEP mode is set to off
automatically. When SLEEP mode is selected the
timer can be adjusted. SLEEP mode is not avail-
able in Fan or Auto mode. Sleep mode automati-
cally reduces set temperature by 2°F after one
hour and 4°F after two hours. This feature limits
compressor usage and in turn enhances energy
saving while you are sleeping.
8. TIMER - Press the TIMER button when the unit
is off to set up the Auto-on timer. The Auto-on
time can be set between .5 - 24 hours. The
icons “T-ON” and “H” will flash for 5 seconds.
Start selecting the time using the “+” and “-”
buttons before the icons stop flashing. The time
will increase/decrease in .5 hour increments
with each press of the “+” or “-” buttons. To
cancel the Auto-on time, manually press the
ON/OFF button to turn the unit on. Press the
TIMER button when the unit is on to set up the
Auto-off timer. The Auto-off time can be set
between .5 – 24 hours. The icons “TOFF” and
“H” will flash for 5 seconds. Start selecting the
time using the “+” and “-” buttons before the
icons stop flashing. The time will
increase/decrease in .5 hour increments with
each press of the “+” or “-” buttons. To cancel
the Auto-off time, manual press the ON/OFF
button to turn the unit off. Once the Auto-on or
Auto-off time is set, the “T-On” or “T-Off” and
“H” will blink for 2 seconds. After 2 seconds the
set temperature will be delayed.
9. LOCK/UNLOCK - Press the “+” and “—”
buttons simultaneously to lock and unlock the
remote control. When the remote is locked,
none of the functions or setting can be changed
using the remote.
10. F° or C° - To switch between the F° or C°
settings, press the MODE and “—” buttons at
the same time.
11. ENERGY SAVER MODE - When the unit is in
energy saver mode, the Energy Saver light will
turn on. In Energy Saver mode, the unit will
turn-off once the room is cooled to the user set
temperature. The fan will also be off at this
point. The unit will turn back on when the room
temperature rises above the user set tempera-
ture.
12. AUTO MODE - The unit chooses between A/C,
Dehumidifier, and fan mode based on the
current room temperature
Battery Size: AAA - NOTE: Do not mix old and new
batteries or different types of AAA batteries.