Specifications

MX-3610N SIMULATION 5 – 122
Note on “Large size” and “Small size”
Small size: The paper length in the transport direction is shorter than the LT size (216mm).
Large size: The paper length in the transport direction is longer than the LT size (216mm).
Adjustment value
When the adjustment value is increased, the warp amount is increased. When the adjustment value is decreased, the warp amount is
decreased.
(When the adjustment value is changed by 1, the stop timing is changed by 0.1mm.)
53
53-6
Purpose
Adjustment
Function (Purpose)
Used to adjust the detection level of the
RSPF document width.
Section
Operation/Procedure
1) Open the RSPF paper feed guide to the maximum width.
2) Press [EXECUTE] key.
The maximum width detection level is recognized.
3) Open the RSPF paper feed guide to the A4R width.
4) Press [EXECUTE] key.
The A4R width detection level is recognized.
5) Open the RSPF paper feed guide to the A5R width.
6) Press [EXECUTE] key.
The A5R width detection level is recognized.
7) Open the RSPF paper feed guide to the minimum width.
8) Press [EXECUTE] key.
The minimum width detection level is recognized.
When the above operation is nor performed normally, "ERROR" is
displayed and. When the above operation is completed normally,
"COMPLETE" is displayed.
53-7
Purpose
Adjustment/Setup
Function (Purpose)
Used to adjust the RSPF document size
width sensor.
Section
Operation/Procedure
1) Select an adjustment target item with scroll key on the touch
panel.
2) Enter the set value with 10-key.
3) Press [OK] key. (The set value is saved.)
[RSPF]
ENGINE P ADU PLAIN PAPER (L) ADU/deflection adjustment value
(Plain paper/Large size)
LT size (216mm)
or above
1 - 99 30 30 30 30
Q ADU HEAVY PAPER (S) ADU/deflection adjustment value
(Heavy paper/Small size)
LT size (216mm)
or less
1 - 99 40 10 10 2
R ADU HEAVY PAPER (L) ADU/deflection adjustment value
(Heavy paper/Large size)
LT size (216mm)
or above
1 - 99 40 10 10 2
S DESK (S) DESK/deflection adjustment value
(Plain paper/Small size)
LT size (216mm)
or less
1 - 99 30 30 30 30
T DESK (L) DESK/deflection adjustment value
(Plain paper/Large size)
LT size (216mm)
or above
1 - 99 30 30 30 30
U DESK HEAVY PAPER
(S)
DESK/deflection adjustment value
(Heavy paper/Small size)
LT size (216mm)
or less
1 - 99 40 10 10 2
V DESK HEAVY PAPER
(L)
DESK/deflection adjustment value
(Heavy paper/Large size)
LT size (216mm)
or above
1 - 99 40 10 10 2
W A4LCC A4LCC/deflection adjustment value - 1 - 99 30 30 30 30
Mode Display/Ite Content
Setting
range
Default value
18cpm/
20cpm
machine
23cpm
machine
26cpm/
31cpm
machine
36cpm
machine
1 TRAYVOLMAX Tray size volume maximum value
2 TRAYVOLA4R Tray volume A4R size adjustment value
3 TRAYVOLA5R Tray volume A5R size adjustment value
4 TRAYVOLMIN Tray size volume minimum value
Item/Display
Setting
range
Default
value
A AD_MAX Max. width position 0 - 1023 84
B AD_P1 A4R width position 0 - 1023 509
C AD_P2 A5R width position 0 - 1023 808
D AD_MIN Min. width position 0 - 1023 961