Specifications

MX-3610N SIMULATION 5 – 133
63-4
Purpose
Adjustment/Setting/Operation data check
Function (Purpose)
Used to display the SIT chart patch density.
Section
Operation/Procedure
1) Set the SIT chart (UKOG-0280FCZZ or UKOG-0280FCZ1) to
the reference position on the left rear frame side of the docu-
ment table.
2) Press [EXECUTE] key.
The patch of the SIT chart is scanned.
When the operation is completed, [EXECUTE] key returns to
the normal display.
3) Select a data display mode.
Select an target display color with [R] [G] [B] keys.
63-5
Purpose
Adjustment/Setup
Function (Purpose)
Used to perform the scanner (CCD) color
balance and gamma default setting.
Section
Operation/Procedure
1) Press [EXECUTE] key, and press [YES] key
2) The scanner (CCD) color balance and gamma are set to the
default.
63-6
Purpose
Adjustment/Setting/Operation data check
Function (Purpose)
Used to display the scan level and the den-
sity level of the copy color balance adjust-
ment patch.
Section
Operation/Procedure
1) Set the color balance adjustment pattern sheet printed with
SIM46-21 on the document table.
2) Press [EXECUTE] key.
The patch image of the adjustment pattern sheet is scanned.
Select a target color with [C] [M] [Y] [K] key.
63-7
Purpose
Adjustment/Setup
Function (Purpose)
Used to register the service target of the
copy mode auto color balance adjustment.
Section
Operation/Procedure
1) Press [SETUP] key on the touch panel.
2) Set the color balance adjustment pattern sheet printed with
SIM46-21 on the document table.
3) Press [EXECUTE] key.
The patch image of the adjustment pattern sheet is scanned.
4) Press [OK] key.
The service target of the copy mode automatic color balance
adjustment is registered according to the patch image of the
scanned adjustment pattern sheet.
The registered color balance and the density are displayed.
Select a target color with [C] [M] [Y] [K] key.
This simulation is executed only when the copy color balance is
manually adjusted.
63-8
Purpose
Adjustment/Setup
Function (Purpose)
Used to set the default of the service target
of the copy mode auto color balance adjust-
ment.
Section
Operation/Procedure
1) Press [EXECUTE] key.
2) Press [YES] key.
The service target of the copy mode automatic color balance
adjustment is set to the default.
The service color balance target and the color balance target
for the user color balance adjustment are set to the same color
balance as the factory color balance target.
63-11
Purpose
Adjustment/Setup
Function (Purpose)
Used to set the target color balance of the
copy mode auto color balance adjustment.
Section
Operation/Procedure
1) Select the target color balance with the touch panel.
THROUGH GAMMA SIT chart scan data
COPY GAMMA Copy mode gamma process data of the SIT chart
scan data
SCANNER GAMMA Image send mode gamma process data of the SIT
chart scan data
SIT CHECK SIT chart scan data/Check result
B Point B target value
C Point C target value
D Point D target value
E Point E target value
F Point F target value
G Point G target value
H Point H target value
I Point I target value
J Point J target value
K Point K target value
L Point L target value
M Point M target value
N Point N target value
O Point O target value
BASE Background sampling value
Item/Display Content
Default
value
Target
color
balance
DEF1 The engine color balance adjustment
target in the automatic color balance
operation is slightly shifted to Magenta.
When this target is selected, the color
balance is converted into natural gray
color balance by the color table in an
actual copy mode and print is made.
DEF 1
DEF2 The engine color balance adjustment
target in the automatic color balance
operation is slightly shifted to natural gray
color balance. When this target is
selected, the color balance is slightly
shifted to Cyan by the color table in an
actual copy mode and print is made.
DEF3 The engine color balance adjustment
target in the automatic color balance
operation is slightly shifted to Cyan. When
this target is selected, the color balance is
converted into the color balance with
enhanced Cyan by the color table in an
actual copy mode and print is made.