Specifications
MX-3610N SIMULATION 5 – 145
66-36
Purpose
Operation test/Check
Function (Purpose)
Used to check send and receive data from
the MODEM controller to the MFP control-
ler or the data line or the command line
individually.
Section
FAX
Operation/Procedure
1) When the machine enters Simulation 66-36, the following
screen is displayed.
2) Operation check
Select an item to be checked on the screen.
<MFP controller I/F check item table>
66-39
Purpose
Setting
Function (Purpose)
Used to check and change the destination
setting saved in EEPROM of the FAX BOX.
Section
FAX
Operation/Procedure
1) When the machine enters the simulation, the currently set des-
tination button is highlighted. (In the default state, JAPAN is set
as the destination.)
2) Select a destination button to set the destination. (In this
example, USA/CANADA is selected.) The selected button is
highlighted and the previously selected button returns to the
normal display.
* When the destination button is changed, the new destination
setting is saved to EEPROM of the FAX BOX.
<Destination setting table>
66-42
Purpose
Setting
Function (Purpose)
Used to rewrite the program to power con-
trol installed in the FAX BOX.
Section
FAX
Operation/Procedure
1) Press [EXECUTE] button.[EXECUTE] button is highlighted
and YES] and [NO] buttons become active.
2) Press [YES] button.
The power control program is rewritten.
3) When rewriting of the power control program is normally com-
pleted, "OK" is displayed and [EXECUTE] button returns to the
normal display, and [YES] and [NO] buttons gray out.
66-43
Purpose
Setting
Function (Purpose)
Used to write the adjustment value into the
power control installed in the FAX BOX.
Section
FAX
Operation/Procedure
1) When the machine enters Simulation 66-43, the following
screen is displayed.
* Use scroll keys to select the select item of the power control
adjustment value.
2) When [EXECUTE] key is pressed, it is highlighted and writing
to the power control is executed. When writing is normally
completed, "OK" is displayed. When it is failed, "NG" is dis-
played.
3) After completion of writing, [EXECUTE] key returns to the nor-
mal display.
<Set range and default value of each set value>
66-61
Purpose
Setting
Function (Purpose)
Used to display the FAX-related soft SW
(151 - 250) on the LCD to allow changing
the soft SW while checking with the LCD.
Section
FAX
Operation/Procedure
1) Enter the [SW NO] with 10-key.
2) Press [DATA] button.
The soft SW data entered in procedure 1) is displayed.
3) Enter the number corresponding to the bit to be changed with
10-key.
*[1] [0]
[0] [1]
4) When [EXECUTE] button is pressed, it is highlighted and the
setting is saved.
66-62
Purpose
Backup
Function (Purpose)
Used to import the FAX receive data into a
USB memory in PDF file type.
Section
FAX
Operation/Procedure
1) Insert the USB memory into the main unit.
2) Select data to be imported.
3) Press [EXECUTE] key.
Execute import of data selected in procedure 2).
When the operation is completed normally, [COMPLETE] is
displayed. In case of an abnormal end, [ERROR] is displayed.
MFP MDMC (DATA once)
Data line Once
MFP MDMC (DATA once)
Data line Once
MFP MDMC (DATA repeat)
Data line Repeat
MFP MDMC (DATA repeat)
Data line Repeat
MFP MDMC (CMD once)
Command line Once
MFP MDMC (CMD once)
Command line Once
MFP MDMC (CMD repeat)
Command line Repeat
MFP MDMC (CMD repeat)
Command line Repeat
JAPAN U.S.A/CANADA EUROPE AUSTRALIA
CHINA ASIA&OTHERS
Item Set range Default value
A CI_LEVEL_JUDGE 2 to 15 6
B CI_CYCLE_MIN 1 to 254 10
C CI_CYCLE_MAX 2 to 255 142
D CI_COUNT 2 to 15 3
E RES_3.3V_LEVEL_JUDGE 2 to 15 15
F EXHS_LEVEL_JUDGE 2 to 225 240
G RHS_LEVEL_JUDGE 2 to 15 2
H SON_TIMEOUT 1 to 127 20
Error display Content
ERROR: NO USB MEMORY DEVICE No USB memory installed
ERROR: NO IMAGE DATA No image data
ERROR Other errors