Specifications
MX-3610N SIMULATION 5 – 148
26cpm/36cpm/31cpm(A) machine
67-34
Purpose
Adjustment/Setup
Function (Purpose)
Used to set the density correction in the
printer high density section. (Support for
the high density section tone gap)
Section
Printer
Operation/Procedure
1) Enter the set value with 10-key.
2) Press [OK] key. (The set value is saved.)
• When tone gap is generated in the high density section, set items
A and B to "0."
The density in the high density section is decreased, but tone
gap is reduced.
• To increase the density in the high density section further, set
items A and B to "1.
The tone gap may occur in high density part.
Do not change the values of items C, D, E, and F. If these values
are changed, the density in the high density area is changed.
67-36
Purpose
Adjustment/Setup
Function (Purpose)
Used to adjust the density in the low den-
sity section.
Section
Printer
Operation/Procedure
1) Enter the adjustment value using the 10-key.
2) Press [OK] key.
When the adjustment value is increased, the low density images
are strongly reduced. When the adjustment value is decreased, the
low density are images are weakly reproduced.
When tone gap is generated in the low density section (highlight
section), changing this adjustment value may improve the trouble.
67-45
Purpose
Adjustment/Setup
Function (Purpose)
Used to adjust the printer image filter and
trapping.
Section
Printer
Operation/Procedure
1) Select an adjustment item with the scroll key.
2) Enter the set value.
3) Press [OK] key.
Display Content
HEAVY PAPER Heavy paper
SCREEN1 600dpi 1bit Photo
SCREEN2 600dpi 1bit Graphics
SCREEN3 600dpi 4bit Photo
SCREEN4 600dpi 4bit Graphics
SCREEN5 1200dpi 1bit Photo
SCREEN6 1200dpi 1bit Graphics
SCREEN7 B/W 600 dpi 1bit
SCREEN8 B/W 600 dpi 4bit
SCREEN9 B/W 1200dpi 1bit
SCREEN10 Gloss 600 dpi 4bit
0 Enable
1Disable
Item/Display Content
Setting
range
Default
value
ACMY
(0: ENABLE
1: DISABLE)
0 CMY engine highest
density correction
mode: Enable
0 - 1 0
1 CMY engine highest
density correction
mode: Disable
BK
(0: ENABLE
1: DISABLE)
0 K engine highest
density correction
mode: Enable
0 - 1 1
1 K engine highest
density correction
mode: Disable
C CYAN MAX
TARGET
Scanner target value for
CYAN maximum density
correction
0 - 999 500
DMAGENTA
MAX TARGET
Scanner target value for
MAGENTA maximum density
correction
0 - 999 500
E YELLOW MAX
TARGET
Scanner target value for
YELLOW maximum density
correction
0 - 999 500
F BLACK MAX
TARGET
Scanner target value for
BLACK maximum density
correction
0 - 999 500
Item/Display Content
Setting
range
Default
value
A A PATCH INPUT A patch input value 0 - 13 1
Item/Display Content
Setting
range
Default
value
NOTE
A SHARPNESS:
COLOR PRINT
Color print 0 - 4 2 The greater
the set value
is, the
stronger the
filer
enhancement
is. The smaller
the set value
is, the
stronger the
filter
smoothness
is.
(0: Soft High,
1: Soft Low, 2:
Center, 3:
Sharp Low, 4:
Sharp High)
B SHARPNESS:
B/W PRINT
Monochrome
print
0 - 4 2
CTRAPPING:
CMY (PCL &
DIRECTPRINT)
CMY
(PCL, Direct
Print)
0 - 5 3 The greater
the set value
is, the
stronger the
trapping is.
(0: OFF, (Low)
1 < 2 < 3 < 4 <
5)
(The target is
vector images.
There is no
effect for the
raster
images.)
However, the
sharpness
also varies.
D TRAPPING: K
(PCL &
DIRECTPRINT)
K
(PCL, Direct
Print)
0 - 5 3
ETRAPPING:
CMY (PS)
CMY (PS) 0 - 5 3
F TRAPPING: K
(PS)
K (PS) 0 - 5 0
GTRAPPING:
CMY (XPS)
CMY (XPS) 0 - 5 0
H TRAPPING: K
(XPS)
K (XPS) 0 - 5 0