Specifications

MX-3610N SIMULATION 5 – 149
67-52
Purpose
Adjustment/Setup
Function (Purpose)
Used to set the default of the gamma of the
printer screen.
Section
Printer
Operation/Procedure
1) Select a target default setting mode with the touch panel.
Press [ALL] key to select all the modes.
2) Press [EXECUTE] key and press [YES] key.
When the printer screen gamma was changed by SIM 67-33,
SIM67-54, it is reset to the default.
18cpm/20cpm/23cpm/31cpm(G) machine
PCL/PS printer
GDI printer
26cpm/36cpm/31cpm(A) machine
67-54
Purpose
Adjustment
Function (Purpose)
Printer color balance adjustment
(Automatic adjustment for each dither (The
adjustment is disable in a GDI printer.))
Section
Printer
Operation/Procedure
This simulation is used to adjust the color balance, the density, and
the gradation in the monochrome mode, the heavy paper mode,
the 1200dpi mode, and the 600dpi 1bit mode.
This simulation is used to improve image quality in these modes
and images.
1) Press [EXECUTE] key. (A3 or 11" x 17" paper is automatically
selected.)
The color patch image (adjustment pattern) is printed out.
2) Set the color patch image (adjustment pattern) printed in the
procedure 1) on the document table so that the thin lines on
the printed color patch image (adjustment pattern) are on the
left side. Place 5 sheets of white paper on the printed color
patch image (adjustment pattern).
3) Press [EXECUTE] key.
The color balance adjustment is automatically performed.
The adjustment pattern is printed out. Check it for any abnor-
mality.
4) Press [OK] key.
The list of the adjustment items (for each dither) is displayed.
5) Select an adjustment item (for each dither).
6) Press [EXECUTE] key. (A3 or 11" x 17" paper is automatically
selected.)
The color patch image (adjustment pattern) is printed out.
7) Set the color patch image (adjustment pattern) printed in the
procedure 6) on the document table so that the thin lines on
the printed color patch image (adjustment pattern) are on the
left side. Place 5 sheets of white paper on the printed color
patch image (adjustment pattern).
8) Press [EXECUTE] key.
The color balance adjustment is automatically performed, and
the color balance check patch image is printed out.
9) When [OK] key is pressed, the adjustment result is registered
and the adjustment mode is terminated. When [EXECUTE]
key is pressed, the adjustment result is registered and the
screen is shifted to the other item (Mode/Image) select menu.
To execute the adjustment of the other item (Mode/Image),
press [EXECUTE] key.
After completion of all the adjustments of the items (Mode/
Image), press [OK] key, and the adjustment results are regis-
tered.
10) Make a print, and check the print image quality.
Use SIM67-52 to reset the adjustment values to the default values.
Item/Display Content
Screen HEAVYPAPER Heavy paper screen
Printer heavy paper automatic density
correction amount
600DPI_1BIT SCREEN1 (600dpi 1bit Photo)
SCREEN2 (600dpi 1bit Graphics)
B/W SCREEN7 (600dpi 1bit Graphics)
SCREEN8 (600dpi 1bit Graphics)
SCREEN9 (600dpi 1bit Graphics)
Printer B/W toner save automatic density
correction amount
GLOSSPAPER SCREEN10 (Glossy paper screen)
Item/Display Content
Screen 600DPI_1BIT SCREEN1 (600dpi 1bit Low (Photo))
SCREEN2 (600dpi 1bit High (Graphics))
B/W SCREEN5 (B/W 600dpi 1bit)
SCREEN6 (B/W 600dpi 2bit Low (Photo))
SCREEN7 (B/W 600dpi 2bit High
(Graphics))
GLOSSPAPER SCREEN8 (Gloss 600dpi 1bit)
SCREEN9 (Gloss 600dpi 2bit)
Item/Display Content
Screen HEAVYPAPER Heavy paper screen
Printer heavy paper automatic density
correction amount
1200DPI_1BIT SCREEN5 (1200dpi 1bit Photo)
SCREEN6 (1200dpi 1bit Graphics)
600DPI_1BIT SCREEN1 (600dpi 1bit Photo)
SCREEN2 (600dpi 1bit Graphics)
B/W SCREEN7 (600dpi 1bit Graphics)
SCREEN8 (600dpi 1bit Graphics)
SCREEN9 (600dpi 1bit Graphics)
Printer B/W toner save automatic density
correction amount
GLOSSPAPER SCREEN10 (Glossy paper screen)
Select item
(Mode)
Content
Heavy Paper Adjustment item to improve the color balance in the
heavy paper mode
B/W Adjustment item to improve the density and gradation in
the monochrome mode
Glossy Adjustment item to improve the color balance in glossy
paper mode
1200dpi 1bit Adjustment item to improve the color balance in 1200dpi
mode