Specifications

MX-3610N SIMULATION 5 – 35
26-18
Purpose
Setting
Function (Purpose)
Used to set Disable/Enable of the toner
save mode operation.
(For the Japan and the UK versions.)
Section
Operation/Procedure
1) Select an item to be set with scroll keys.
2) Enter the set value with 10-key.
3) Press [OK] key.
The set value in step 2) is saved.
18cpm/20cpm/23cpm/31cpm(G) machine
26cpm/36cpm/31cpm(A) machine
26-30
Purpose
Setting
Function (Purpose)
Used to set the operation mode corre-
sponding to the CE mark (Europe safety
standards). (For slow start to drive the fus-
ing heater lamp)
Section
Operation/Procedure
1) Enter the set value with 10-key.
2) Press [OK] key.
The set value in step 1) is saved.
* Even in Enable state, the control may not be executed due
to the power frequency, etc.
26-32
Purpose
Setting
Function (Purpose)
Used to set the specifications of the fusing
cleaning operation.
Section
Fusing
Operation/Procedure
1) Enter the set value with 10-key.
Enable/Disable of the user fusing cleaning function is set.
2) Press [OK] key.
26-35
Purpose
Setting
Function (Purpose)
Used to set the display mode of SIM 22-4
trouble history when a same trouble
occurred repeatedly. There are two display
modes: display as one trouble and display
as several series of troubles.
Section
Operation/Procedure
1) Enter the set value with 10-key.
2) Press [OK] key.
The set value in step 1) is saved.
Item Display Content
Default
value
A COPY 0 Copy toner save mode is inhibited.
0
1 Copy toner save mode is allowed
B PRINTER 0 Printer toner save mode is inhibited.
0
1 Printer toner save mode is allowed.
Item Display Content
Setting
range
Default
value
NOTE
A COPY
(0: OFF
1: SV1
2: SV2
3: SV3)
0 Copy toner
save mode
NOT
available
0 - 3 0
1 Copy toner
save mode 1
1: Toner
save LOW
2 Copy toner
save mode 2
3 Copy toner
save mode 3
3: Toner
save HIGH
B PRINTER
(0: OFF
1: SV1
2: SV2
3: SV3)
0 Printer toner
save mode
NOT
available
0 - 3 0
1 Printer toner
save mode 1
1: Toner
save LOW
2 Printer toner
save mode 2
3 Printer toner
save mode 3
3: Toner
save HIGH
C COPY TS
DISPLAY
(0: YES
1: NO)
0 Setting of
copy toner
save is
displayed.
0 - 1 1
(Linked
with the
set value
of SIM26-
6.)
1 Setting of
copy toner
save is not
displayed.
D PRINTER
TS
DISPLAY
(0:YES
1:NO)
0 Setting of
printer toner
save is
displayed.
0 - 1 1
(Linked
with the
set value
of SIM26-
6.)
1 Setting of
printer toner
save is not
displayed.
Destination Default value C Default value D
U.S.A 0 (Displayed) 0 (Displayed)
CANADA 0 (Displayed) 0 (Displayed)
INCH 0 (Displayed) 0 (Displayed)
JAPAN 1 (Not Displayed) 0 (Displayed)
AB_B 0 (Displayed) 0 (Displayed)
EUROPE 0 (Displayed) 0 (Displayed)
U.K. 1 (Not Displayed) 0 (Displayed)
AUS. 0 (Displayed) 0 (Displayed)
AB_A 0 (Displayed) 0 (Displayed)
CHINA 0 (Displayed) 0 (Displayed)
0 Control allowed
1 Control inhibited
U.S.A 1 (CE not supported) EUROPE 0 (CE supported)
CANADA 1 (CE not supported) U.K. 0 (CE supported)
INCH 1 (CE not supported) AUS. 0 (CE supported)
JAPAN 1 (CE not supported) AB_A 0 (CE supported)
AB_B 1 (CE not supported) CHINA 0 (CE supported)
Item/Display Content Setting range
Default
value
ACLEANIN
G PRINT
SET
User fusing cleaning
function is Enable.
0YES1(NO)
User fusing cleaning
function is Disable.
1NO
0 Only once display.
1 Any time display.