Specifications

MX-3610N SIMULATION 5 – 37
(*2) Item B: COLOR MODE set value (OFF: Displayed/ON: Not dis-
played)
(*3)
26-51
Purpose
Setting
Function (Purpose)
Used to set the specifications of the serial
port operation. (For PCI)
Section
Operation/Procedure
1) Enter the set value with 10-key.
When the PCI is installed, setting is made to 1 or 2.
2) Press [OK] key.
MODE1: Red LED is light/blink/OFF, MODE2: Red LED always
OFF
When "PCI SETTING" is changed from "0" to "1" or "2," if SIM26-03
"OUTSIDE AUDITOR" is set to "S_VENDOR," "OUTSIDE AUDI-
TOR" is changed to "NONE."
26-52
Purpose
Setting
Function (Purpose)
Used to set whether non-printed paper
(insertion paper, cover paper) is counted up
or not.
Section
Operation/Procedure
1) Enter the set value with 10-key.
2) Press [OK] key.
The set value in step 1) is saved.
Set value
Mode 2-Color/Single
Single 2-color Counter
0 OFF OFF OFF
1 OFF ON OFF
2ONOFFOFF
3ON ONOFF
4OFFOFF ON
5 OFF ON ON
6ONOFFON
7ON ON ON
Target
paper
Target paper setting
01
Inner
finisher
Postcard,
envelope
The operation is stopped when
10 sheets of a same kind are
discharged continuously. When,
however, different kinds of
sheets are mixed and
discharged and 10 or less
sheets of a kind are
continuously discharged, the
operation is stopped by the
paper exit tray full detection.
If it is set to "1,"
the operation is
stopped when
the paper exit
tray is full or
when 250
sheets
(35.5mm thick)
are discharged.
Label
sheet,
tab sheet,
OHP
The operation is stopped when
100 sheets of a same kind are
discharged continuously. When,
however, different kinds of
sheets are mixed and
discharged and 100 or less
sheets of a kind are
continuously discharged, the
operation is stopped by the
paper exit tray full detection.
Saddle
stitch
finisher
Postcard,
envelope
The operation is stopped when
30 sheets of a same kind are
discharged continuously. When,
however, different kinds of
sheets are mixed and
discharged and 30 or less
sheets of a kind are
continuously discharged, the
operation is stopped by the
paper exit tray full detection.
If it is set to "1,"
the operation is
stopped when
the paper exit
tray is full or
when 500
sheets (67mm
thick) are
discharged.
Label
sheet,
tab sheet,
OHP
The operation is stopped when
100 sheets of a same kind are
discharged continuously. When,
however, different kinds of
sheets are mixed and
discharged and 100 or less
sheets of a kind are
continuously discharged, the
operation is stopped by the
paper exit tray full detection.
Item/Display Content
Setting
range
Default
value
APCI
SETTING
Serial port PCI mode OFF
(For connecting the serial
port vendor)
00
(Serial
port PCI
mode
OFF)
Serial port PCI mode ON
(JOB status LED: MODE1)
Serial port PCI mode ON
(JOB status LED: MODE2)
0 Count up
1 No count up
Destination Default
U.S.A 0 (Counted)
CANADA 0 (Counted)
INCH 0 (Counted)
JAPAN 1 (Not counted)
AB_B 0 (Counted)
EUROPE 0 (Counted)
U.K. 0 (Counted)
AUS. 1 (Not counted)
AB_A 0 (Counted)
CHINA 0 (Counted)