Specifications

MX-3610N SIMULATION 5 – 40
26-71
Purpose
Setting
Function (Purpose)
Used to set the trial mode of the web
browsing function. (26cpm/36cpm/
31cpm(A) machine)
Section
Operation/Procedure
1) Enter the set value with 10-key.
2) Press [OK] key.
26-73
Purpose
Setting
Function (Purpose)
Enlargement continuous shoot, A3 wide
copy mode image loss (shade delete quan-
tity) adjustment
Section
Operation/Procedure
1) Select an item to be set with scroll keys.
2) Enter the set value with 10-key.
3) Press [OK] key.
When the adjustment value is increased, the image loss
(shade delete quantity) is increased.
26-74
Purpose
Setting
Function (Purpose)
Used to set the OSA trial mode.
Section
Operation/Procedure
1) Enter the set value with 10-key.
2) Press [OK] key.
26-78
Purpose
Setting
Function (Purpose)
Used to set the password of the remote
operation panel.
Section
Operation/Procedure
1) Enter a password with 10-key. (5 - 8 digits)
The entered password is displayed on the column of "NEW".
In order to correct the entered password, press the [clear] key
to delete the entered value one digit by one digit.
2) Press [SET] key.
26-79
Purpose
Setting
Function (Purpose)
Used to set YES/NO of the pop-up display
of user data delete result.
Section
Operation/Procedure
1) Enter the set value with 10-key.
The value for the display operation specification after comple-
tion of user data delete is set.
2) Press [OK] key.
27
27-1
Purpose
Setting
Function (Purpose)
Used to set non-detection of communica-
tion error (U7-00) with RIC. (FSS function)
Section
Operation/Procedure
1) Enter the set value with 10-key.
2) Press [OK] key.
The set value in step 1) is saved.
Item/Display Content
Setting
range
Default
value
AWEB
BROWSING
TRIAL MODE
(0: YES 1: NO)
0 Web browsing trial mode
setting
0 - 1 1
1 Web browsing trial mode
canceling
Item/Display Content
Setting
range
Default value
ADELETING
SHADOW ADJ
(M)
Rear frame side
image loss quantity
(shade delete
quantity) adjustment
0 - 50 0
(Adjustment
amount:
0.1mm/step)
BDELETING
SHADOW ADJ (S)
Lead edge image
loss quantity (shade
delete quantity)
adjustment
0 - 50 0
(Adjustment
amount:
0.1mm/step)
Item/Display Content
Setting
range
Default
value
AOSA TRIAL MODE
(0: YES 1: NO)
0 Used to set the
OSA trial mode.
0 - 1 1
1 OSA trial mode is
canceled.
Item/Display Content Setting range
Default
value
A DISP SET User data delete result
pop-up display ON
YES 1 0 (NO)
User data delete result
pop-up display OFF
NO 0
0 Not detection
1 Detection