Specifications

MX-3610N MAINTENANCE 8 – 6
8Tray paper
feed section
Tray paper
feed unit
1 Paper pickup roller ✕ Replace at 80K of each
paper feed counter or
after 1-year use
2 Paper feed roller ✕ Replace at 80K of each
paper feed counter or
after 2-year use
3 Separation roller ✕ Replace at 80K of each
paper feed counter or
after 3-year use
4 Transport roller 4 ✕ 
5 Transport roller 2 ✕ 
6 Torque limiter ✕ ✕✕✕✕✕✕
7Sensors ✕ ✕✕✕✕✕✕
– Paper guides  
9 Paper
registration
section
(paper
transport
section)/
Paper exit
section/
ADU section
PS unit 1 Registration roller
(Idle)
✕ 
2 Registration roller
(drive)
✕ 
3 Transport roller 5 ✕ 
4Sensors
Right door unit 5 Transport roller 7 ✕ 
6 Transport roller 8 ✕ 
7Sensors
Fusing rear
unit
8 Transport roller 6 ✕ 
Paper exit unit 9 Paper exit roller 1 ✕ 
10 Discharge brush ✕ ✕✕✕✕✕✕
11 Sensors ✕ ✕✕✕✕✕✕
Other 12 Paper dust
removing unit
 
– Paper guides  
10 Drive
section
Main drive unit 1 Gears (grease) ✕ ✕✕✕✕✕✕Apply to the specified
position when checking.
FLOIL G-313S
2 Shafts (grease) ✕ ✕✕✕✕✕✕
3 Shaft earth sections
(conduction grease)
✕ ✕✕✕✕✕✕Apply to the specified
position when checking.
FLOIL GE-676
4Belts ✕ ✕✕✕✕✕✕
5Sensors ✕ ✕✕✕✕✕✕
Transport drive
unit
6Belts ✕ ✕✕✕✕✕✕
7 Connection arm ✕ ✕✕✕✕✕✕Apply to the specified
position when checking.
HANARL FL-955R
8 Shafts (grease) ✕ ✕✕✕✕✕✕
Fusing drive
unit
9 Shafts (grease) ✕ ✕✕✕✕✕✕
Paper exit
dr
ive unit
10 Shafts (grease) ✕ ✕✕✕✕✕✕
11 Belts ✕ ✕✕✕✕✕✕
11 Fusing
section
Fusing unit 1 Lower separation
pawl
✕ ✕✕✕✕✕✕Replace as needed.
2 Lower separation
pawl spring
✕ ✕✕✕✕✕✕Replace as needed.
3 Separation plate ✕ ✕✕✕✕✕✕Replace as needed.
4 Oil applying roller ✕ 
5 Backup roller ✕ 
6 CL roller bearing ✕ 
7 Lower thermistor ✕ ✕✕✕✕✕✕Replace as needed.
8 Pressure roller gear ✕ ✕✕✕✕✕✕Replace as needed.
9 Pressure roller
bearing
✕ ✕✕✕✕✕✕Replace as needed.
10 Pressure roller ✕ Apply grease to the shaft
section when replacing.
(UKOG-0235FCZZ)
11 Sub thermistor ✕ ✕✕✕✕✕✕Replace as needed.
12 Heat-insulating bush ✕ ✕✕✕✕✕✕Replace as needed.
13 Heating roller
bearing
✕ ✕✕✕✕✕✕Replace as needed.
14 Fusing roller ✕ Apply grease to the shaft
section when replacing.
(UKOG-0235FCZZ)
15 Main thermistor ✕ ✕✕✕✕✕✕Replace as needed.
16 Paper guides  
17 Gears ✕ ✕✕✕✕✕✕
18 Lower scraper
assembly
✕ 
Section/Unit
work sequence
Name Unit name
Work
sequence
Part name
When
calling
80
k
160
k
240
k
320
k
400
k
480
k
Remark