Specifications

MX-3610N SIMULATION 5 – 71
26cpm/31cpm machine
* Each temperature correction value: 1 count for 1C change in temperature control
* Each paper exit count: 1 count = 1 sheet change
* Each cool down time: 1 count = 1sec change
Code descriptions
List of destination groups
Item/Display Content
Default value (SW-A) Default value (SW-B)
Group
A
Group
B
Group
C
Group
A
Group
B
Group
C
A NN_120_FUS_DUP_HL_UM Correction value for SIM43-4-A, E at 120C or below in N/N
Warm-Up
50 50 50 50 50 50
B NN_120_FUS_DUP_HL_LM Correction value for SIM43-4-B, F at 120C or below in N/N
Warm-Up
50 50 50 50 50 50
C LL_120_FUS_DUP_HL_UM Correction value for SIM43-22-A, E at 120C or below in N/N
Warm-Up
50 50 50 50 50 50
D LL_120_FUS_DUP_HL_LM Correction value for SIM43-22-B, F at 120C or below in N/N
Warm-Up
50 50 50 50 50 50
E HH_120_FUS_DUP_HL_UM Correction value for SIM43-23-A, E at 120C or below in N/N
Warm-Up
50 50 50 50 50 50
F HH_120_FUS_DUP_HL_LM Correction value for SIM43-23-B, F at 120C or below in N/N
Warm-Up
50 50 50 50 50 50
G NN_120_FUS_DUP_CNT Fusing duplex paper exit count under NN environment 5 5 5 5 5 5
H LL_120_FUS_DUP_CNT Fusing duplex paper exit count under LL environment 10 10 10 10 10 10
I HH_120_FUS_DUP_CNT Fusing duplex paper exit count under HH environment 5 5 5 5 5 5
J COOL_DOWN_HEAVY Cool down time heavy paper 5 5 5 5 5 5
K COOL_DOWN_OHP Cool down time OHP 10 10 10 10 10 10
L COOL_DOWN_ENVELOPE Cool down time envelope 15 15 15 15 15 15
M NN_120_FUS_DUP_HL_US Correction value for SIM43-4-C, G at 120C or below in N/N
Warm-Up
50 50 50 50 50 50
N LL_120_FUS_DUP_HL_US Correction value for SIM43-22-C, G at 120C or below in L/L
Warm-Up
50 50 50 50 50 50
O HH_120_FUS_DUP_HL_US Correction value for SIM43-23-C, G at 120C or below in H/H
Warm-Up
50 50 50 50 50 50
P HL_UM THIN PAPER BW Thin paper BW-TH_UM 115 115 115 115 115 115
Q HL_LM THIN PAPER BW Thin paper BW-TH_LM 105 105 105 105 105 105
R HL_US THIN PAPER BW Thin paper BW-TH_US 135 135 135 135 135 135
S HL_UM THIN PAPER CL Thin paper COL-TH_UM 115 115 115 115 115 115
T HL_LM THIN PAPER CL Thin paper COL-TH_LM 105 105 105 105 105 105
U HL_US THIN PAPER CL Thin paper COL-TH_US 135 135 135 135 135 135
V HL_UM THIN PAPER READY Thin paper Ready-TH_UM 120 120 120 120 120 120
W HL_UM REC PAPER BW Recycled paper BW-TH_UM 130 135 140 130 135 140
X HL_LM REC PAPER BW Recycled paper BW-TH_LM 110 110 110 110 110 110
Y HL_US REC PAPER BW Recycled paper BW-TH_US 140 155 165 140 155 165
Z HL_UM REC PAPER CL Recycled paper COL-TH_UM 130 135 140 130 135 140
AA HL_LM REC PAPER CL Recycled paper COL-TH_LM 110 110 110 110 110 110
AB HL_US REC PAPER CL Recycled paper COL-TH_US 140 155 165 140 155 165
AC HL_UM REC PAPER READY Recycled paper Ready-TH_UM 140 145 150 140 145 150
TH_UM Fusing thermistor main (Front surface of paper) HL_UM Heater lamp main (Heat roller for front surface of paper)
TH_LM Fusing thermistor main (Back surface of paper) HL_LM Heater lamp main (Heat roller for back surface of paper)
TH_US Fusing thermistor sub (Front surface of paper) HL_US Heater lamp sub (Heat roller for front surface of paper)
SW-A Setting value when plain paper is selected in the system setting/device setting/fusing control setting.
SW-B Set value when heavy paper is selected in the system setting/device setting/fusing control setting.
The set value displayed in this simulation differs depending on plain paper or heavy paper which is selected in the system setting/device setting/fusing
control setting.
(Example) When plain paper is selected in the system setting/device setting/fusing control setting, the value of SW-A is displayed.
Group Destination
Group AJAPAN––––
Group B U. S. A CANADA INCH – –
Group C EUROPE U. K AUS. AB_B CHINA