Specifications

MX-3610N SIMULATION 5 – 82
When REFRESH MODE setting is enabled (0), the menu of the user process control execution button is displayed on the user system setting
menu.
When the color balance or the density change is not within the allowable range, the user can perform the process control manually and forcibly.
However, toner is consumed grater than as usual. This point must be explained to the user clearly.
44-29
Purpose
Setting
Function (Purpose)
Used to set the operating conditions of the
process control during a job.
Section
Process
Operation/Procedure
1) Select a target item of setting with scroll key on the touch
panel.
2) Enter the set value with 10-key.
3) Press [OK] key.
HV: High density process control
HT: Halftone process control
44-31
Purpose
Adjustment/Setup
Function (Purpose)
Used to adjust the OPC drum phase. (Man-
ual adjustment)
Section
Process
Operation/Procedure
For the OPC drum phase adjustment, do not use this simulation,
but use SIM50-22 (auto adjustment).
1) Select item A with scroll key.
2) Enter the value corresponding to the adjustment pattern with
10-key.
3) Press [EXECUTE] key. (The adjustment pattern is printed out.)
4) Select an adjustment pattern whose deflection is within two
scale lines on the adjustment pattern of C,M, Y colors.
5) Select item B with scroll key.
6) Enter the adjustment pattern sheet number selected in proce-
dure 4).
7) Press [EXECUTE] key.
8) The adjusted adjustment pattern is printed.
44-37
Purpose
Adjustment/Setup
Function (Purpose)
Used to set the development bias correc-
tion level in the continuous printing opera-
tion.
Section
Operation/Procedure
1) Select a set target color with the touch panel.
2) Select a target item with scroll keys.
3) Enter the set value with 10-key.
4) Press [OK] key. (The set value is saved.)
When the print density is varied in the continuous printing opera-
tion, this simulation is used.
Setting of the
secondary
transfer
cleaning
conditions
AE 2TRAN_CLEAN_
TIME1
Secondary transfer cleaning process time judgment threshold value 1
(The total number of sheets for cleaning execution conditions) (Cleaning
time: Short)
5 - 999 200
AF 2TRAN_CLEAN_
TIME2
Secondary transfer cleaning process time judgment threshold value 2
(The total number of sheets for cleaning execution conditions) (Cleaning
time: Medium)
5 - 999 300
AG 2TRAN_CLEAN_
TIME3
Secondary transfer cleaning process time judgment threshold value 3
(The total number of sheets for cleaning execution conditions) (Cleaning
time: Long)
5 - 999 500
Mode Item/Display Content Setting range
Default
value
Item/Display Content Setting range Default value
A COPY During copy job 0 - 2 0: No execution
1: HV only
2: HV  HT
2
B PRINTER During print job 2
C FAX During FAX print job 2
D SELF PRINT During self print 2
E CPY TO PRT TABLE Halftone process control copier -
printer conversion table select
0 - 1 0:CALCULA
TED
1:DEFAULT
0: Color balance calculation value (Revised every time
when SIM46-74 is executed.)
1: Default (Fixed value)
0