Specifications
MX-3610N SIMULATION 5 – 89
* When tone gap is generated in the high density area, set items A
and B to "0".
The density of high density part decreases. However, the tone
gap is better.
* To increase the density in the high density area further, set items
A and B to "1".
The tone gap may occur in high density part.
Do not change the values of items C, D, E, and F. If these values
are changed, the density in the high density area is changed.
46-24
Purpose
Adjustment
Function (Purpose)
Copy color balance adjustment
(Auto adjustment)
Section
Operation/Procedure
1) Press [EXECUTE] key.
The color patch image (adjustment pattern) is printed out.
2) Plate the printed adjustment pattern on the document table,
select [FACTORY] or [SERVICE] mode.
3) Press [EXECUTE] key.
The copy color balance automatic adjustment is performed,
then the adjustment result pattern is printed.
4) Press [OK] key.
The halftone correction target registration is processed.
46-25
Purpose
Adjustment
Function (Purpose)
Used to adjust the copy color balance. (Sin-
gle color copy mode)
Section
Operation/Procedure
1) Select an adjustment target color with [C][M][Y] keys on the
touch panel.
2) Select an adjustment target item with scroll key on the touch
panel.
3) Enter the set value with 10-key.
4) Press [OK] key. (The set value is saved.)
When the adjustment value is increased, the image density of the
target color is increased, and vice versa.
18cpm/20cpm/23cpm/31cpm(G) machine
26cpm/36cpm/31cpm(A) machine
46-26
Purpose
Adjustment
Function (Purpose)
Used to reset the single color mode color
balance set value to the default.
Section
Operation/Procedure
1) Press [EXECUTE] key.
2) Press [YES] key.
The color balance value of the single color mode is reset to the
default value.
46-27
Purpose
Adjustment/Setup
Function (Purpose)
Used to adjust the gamma/density of copy
images, texts, and line image edges.
Section
Operation/Procedure
1) Select a target item of setting with scroll key on the touch
panel.
2) Enter the set value with 10-key.
3) Press [OK] key. (The set value is saved.)
When the adjustment values of items A, C, and E are changed, the
gamma of text and line edge image density section is changed.
BK
(0: ENABLE
1: DISABLE)
0 K engine highest
density correction
mode: Enable
0 - 1 1
1 K engine highest
density correction
mode: Disable
C CYAN MAX
TARGET
Scanner target value for
CYAN maximum density
correction
0 - 999 500
D MAGENTA
MAX TARGET
Scanner target value for
MAGENTA maximum density
correction
0 - 999 500
E YELLOW MAX
TARGET
Scanner target value for
YELLOW maximum density
correction
0 - 999 500
F BLACK MAX
TARGET
Scanner target value for
BLACK maximum density
correction
0 - 999 500
Item/Display Setting range
Default value
CMY
A RED 0 - 255 0 255 200
Item/Display Content
Setting
range
Default
value
B GREEN 0 - 255 255 0 255
C BLUE 0 - 255 255 150 0
D CYAN 0 - 255 255 0 0
E MAGENTA 0 - 255 0 255 0
F YELLOW 0 - 255 0 0 255
Item/Display Setting range
Default value
CMY
A RED 0 - 255 0 255 200
B GREEN 0 - 255 255 0 255
C BLUE 0 - 255 255 150 0
D CYAN 0 - 255 255 0 0
E MAGENTA 0 - 255 0 255 0
F YELLOW 0 - 255 0 0 255
G ORANGE 0 - 255 0 150 255
H NAVY 0 - 255 255 200 0
I LIGHT GREEN 0 - 255 150 0 150
J LIGHT BLUE 0 - 255 150 20 0
K AQUA MARINE 0 - 255 170 0 50
L PURPLE 0 - 255 128 255 0
M PINK 0 - 255 0 150 20
N YELLOW GREEN 0 - 255 128 0 255
O BEIGE 0 - 255 0 50 170
Item/Display
(Copy mode)
Content
Setting
range
Default
value
A BLACK TEXT
(SLOPE)
Black character edge
gamma skew adjustment
1 - 99 50
B BLACK TEXT
(INTERCEPT)
Black character edge
density adjustment
1 - 99 50
C COLOR TEXT
(SLOPE)
Color character edge
gamma skew adjustment
1 - 99 50
D COLOR TEXT
(INTERCEPT)
Color character edge density
adjustment
1 - 99 50
EED TEXT
(SLOPE)
Text/Map mode gamma
adjustment (Text/Map mode)
1 - 99 50
FED TEXT
(INTERCEPT)
Text/Map mode density
adjustment (Text/Map mode)
1 - 99 50
Item/Display Setting range
Default value
CMY