Specifications
MX-3610N SIMULATION 5 – 97
46-51
Purpose
Adjustment/Setup
Function (Purpose)
Used to adjust the gamma for the copy
mode heavy paper mode and the image
process mode.
Section
Operation/Procedure
1) Select a target adjustment mode with the touch panel key
[PAPER/DITHER].
2) Select an adjustment target color with [K][C][M][Y] keys on the
touch panel.
3) Select a target adjustment density level with scroll key on the
touch panel.
4) Enter the set value with 10-key.
5) Press [EXECUTE] key, or [OK] key.
When [EXECUTE] key is pressed, the self print image is out-
putted.
When the image density is insufficient or a background copy is
made in heavy paper copy, change this adjustment value to adjust
the image density.
*1: 18cpm/20cpm machine: Disable without HDD.
46-52
Purpose
Adjustment/Setup
Function (Purpose)
Used to set the gamma default for the copy
mode heavy paper and the image process
mode. (After execution of either SIM46-54
or SIM46-51, the adjustment value is reset
to the initial value.)
Section
Operation/Procedure
1) Select an item to be set to the default with the touch panel key.
To reset the adjustment values of all the items, select [ALL].
2) Press [EXECUTE] key.
3) Press [YES] key.
46-54
Purpose
Adjustment
Function (Purpose)
Used to perform the engine halftone auto-
matic density adjustment (dither).
Section
Operation/Procedure
1) Press [EXECUTE] key.
The high density process control is started to make 48 patch
self print. (A4 (11" x 8.5") or A3 (11" x 17") paper in the paper
feed tray is used.)
2) Place the 48 patch self print on the document table, and press
[EXECUTE] key.
Scanning the 48 patch self print is started.
After scanning the 48 patch self print, the 17 patch self print is
automatically printed.
3) Press [OK] key.
After completion of the correction amount registration, the
screen shifts to the dither selection menu.
4) Select an item (dither) to be adjusted.
18cpm/20cpm/23cpm/31cpm(G) machine
*1: 18cpm/20cpm machine: Disable without HDD.
26cpm/36cpm/31cpm(A) machine
5) Press [EXECUTE] key.
The 48 patch self print is printed.
6) Place the 48 patch self print on the document table, and press
[EXECUTE] key.
Scanning the 48 patch self print is started.
After scanning the patch, the screen automatically shifts to the
dither selection menu.
7) After completion of the adjustment of all the density adjustment
items (dither), press [OK] key.
Item/Display Content Color
HEAVY*
1
Copier heavy paper gamma KCMY
DITH1*
1
Black edge K
DITH2*
1
Color edge KCMY
DITH3 Color error diffusion KCMY
DITH4 Monochrome error diffusion K
DITH8*
1
Monochrome dither K
Item/Display
Density level
(Point)
Setting range
Default
value
A POINT1 Point 1 1 - 999 500
B POINT2 Point 2 1 - 999 500
C POINT3 Point 3 1 - 999 500
D POINT4 Point 4 1 - 999 500
E POINT5 Point 5 1 - 999 500
F POINT6 Point 6 1 - 999 500
G POINT7 Point 7 1 - 999 500
H POINT8 Point 8 1 - 999 500
I POINT9 Point 9 1 - 999 500
J POINT10 Point 10 1 - 999 500
K POINT11 Point 11 1 - 999 500
L POINT12 Point 12 1 - 999 500
M POINT13 Point 13 1 - 999 500
N POINT14 Point 14 1 - 999 500
O POINT15 Point 15 1 - 999 500
P POINT16 Point 16 1 - 999 500
Q POINT17 Point 17 1 - 999 500
HEAVYPAPER*
1
Copier/gamma for heavy paper
BLACK EDGE*
1
Black edge
COLOR EDGE*
1
Color edge
COLOR ED Color error diffusion
B/W ED Monochrome error diffusion
B/W 600*
1
Monochrome dither 600dpi
HEAVYPAPER Copier/gamma for heavy paper
BLACK EDGE Black edge
COLOR EDGE Color edge
COLOR ED Color error diffusion
B/W ED Monochrome error diffusion
B/W 600 Monochrome dither 600dpi
WOVEN1 Watermark mode 1
WOVEN2 Watermark mode 2
WOVEN3 Watermark mode 3
WOVEN4 Watermark mode 4