Specifications

MX-3610N SIMULATION 5 – 105
46-66
Purpose
Adjustment/Setup
Function (Purpose)
Used to adjust the reproduction capability
of watermarks in the copy/printer mode.
(26cpm/36cpm/31cpm(A) machine)
Section
Operation/Procedure
This is to adjust the reproduction capability of watermarks in the
copy/printer mode.
1) Select the adjustment mode.
2) Select an adjustment item according to the necessity.
3) Enter the adjustment value with 10-key and press [OK] key.
4) Make a copy, and check the adjustment result.
Item/Display Content
Setting
range
Default
value
Note
PATTERN A WOVEN DEN BK LOW Watermark density level (Black LOW) 0 - 255 15 The adjustment value is changed to
increase or decrease the density of the
watermark of background documents
(primary output).
To increase the watermark density,
increase the adjustment value.
To decrease the watermark density,
decrease the adjustment value.
When the adjustment value is increased,
the watermark area which is originally not
reproduced becomes difficult to disappear.
When the adjustment value is decreased,
the watermark area which is originally
reproduced becomes easy to disappear.
B WOVEN DEN BK MIDDLE Watermark density level (Black MIDDLE) 0 - 255 19
C WOVEN DEN BK HIGH Watermark density level (Black HIGH) 0 - 255 23
D WOVEN DEN C LOW Watermark density level (Cyan LOW) 0 - 255 19
E WOVEN DEN C MIDDLE Watermark density level (Cyan MIDDLE) 0 - 255 23
F WOVEN DEN C HIGH Watermark density level (Cyan HIGH) 0 - 255 27
G WOVEN DEN M LOW Watermark density level (Magenta LOW) 0 - 255 15
H WOVEN DEN M MIDDLE Watermark density level (Magenta MIDDLE) 0 - 255 18
I WOVEN DEN M HIGH Watermark density level (Magenta HIGH) 0 - 255 21
J CONTRAST Contrast adjustment 0 - 255 2 This is used to adjust the variation in the
watermark density when the adjustment
value of the watermark print/contrast
adjustment in the system setting is changed
by 1.
When this value is increased, the variation
is also increased. When the value is
decreased, the variation is also decreased.
When the adjustment value is 0, the result
of the contrast adjustment is not reflected.
(* The adjustment value must be set to 1 or
greater.)
K HT TYPE (POSI) For half-tone index watermark type positive 42 - 43 42 To reproduce the containing characters of
watermark copy (secondary output) more
clearly, set to 43.
In that case, however, the containing
characters of the watermark document
(primary output) can be easily reproduced.
L HT TYPE (NEGA) For half-tone index watermark type negative 42 - 43 42 To reproduce the containing characters of
watermark copy (secondary output) more
clearly, set to 43.
In that case, however, the containing
characters of the watermark document
(primary output) can be easily reproduced.