Specifications

MX-3610N SIMULATION 5 – 107
46-74
Purpose
Adjustment
Function (Purpose)
Copy color balance adjustment (Auto
adjustment)/Printer color balance adjust-
ment (Auto adjustment)
Section
Operation/Procedure
This simulation is used to perform SIM46-24 and SIM67-24 contin-
uously.
To perform both the copy color balance adjustment (Automatic
adjustment) and the printer color balance adjustment (Automatic
adjustment), use this simulation for efficient adjustment operations.
1) Press [EXECUTE] key, and the high density process control is
performed. Then, the copy color balance adjustment pattern is
printed.
2) Place the printed adjustment pattern on the document table,
select [FACTORY] or [SERVICE] mode.
3) Press [EXECUTE] key, and the copy color balance adjustment
is performed and the adjustment result pattern is printed.
4) Press [EXECUTE] key, and the printer color balance adjust-
ment pattern is printed.
5) Place the printed adjustment pattern on the document table,
select [FACTORY] or [SERVICE] mode.
6) Press [EXECUTE] key, and the printer color balance adjust-
ment (automatic adjustment) is performed and the adjustment
result pattern is printed.
7) Press [OK] key, and the halftone correction target is registered.
8) When [EXECUTE] key is displayed, press it.
When "COMPLETED THIS PROCEDURE" is displayed, the adjust-
ment is completed.
The adjustment result becomes effective only when the adjustment
procedure for both copy and print mode have completed success-
fully. For example, when the copy color balance adjustment (auto-
matic adjustment) is performed and the simulation is canceled, the
adjustment result is not effective.
46-90
Purpose
Adjustment
Function (Purpose)
Used to set the process operation of high-
compression PDF images.
(26cpm/36cpm/31cpm(A) machine)
Section
Operation/Procedure
1) Select a target adjustment mode.
2) Select an adjustment target item with the scroll key.
3) Enter the set value with 10-key.
4) Press [OK] key. The set value is saved.
46-91
Purpose
Adjustment
Function (Purpose)
Used to adjust the reproduction capability
of black text. (26cpm/36cpm/31cpm(A)
machine)
Section
Operation/Procedure
1) Select an item to be set with the scroll key.
2) Enter the set value with 10-key.
3) Press [OK] key.
The adjustment value is set.
When COLOR key or MONO key is pressed, the adjustment value
is set and a copy is made simultaneously.
Mode Item/Display Content
Setting
range
Default
value
TEXT A GLYPH
SENSITIVITY
Text handling
selection
0 - 2 0
BBG SW FOR
FINDLINES
Line handling
selection
0 - 1 0
CHOR
FINDLINES SW
Line detection
SW (H)
0 - 2 0
DVERT
FINDLINES SW
Line detection
SW (V)
0 - 2 0
E FGCOLOR
INDEXING SEL
Text color
number
adjustment SW
0 - 3 0
F FGCOLOR
INDEXING ADJ
Text color
adjustment
0 - 4 2
COLOR A LUMINANCE
ADJUSTMENT
Luminance
adjustment
0 - 4 2
B CHROMA
INTENT
Chroma
selection
0 - 2 1
C NEUTRAL
ADJUSTMENT
Neutral
adjustment
0-2 0
DR-RATIO
ADJUSTMENT
Gray scale
adjustment (R)
0-1000 299
EG-RATIO
ADJUSTMENT
Gray scale
adjustment (G)
0-1000 587
BG LAYER A BG LAYER
INTENT 1
Speed priority
setting
0 - 2 1
B BG LAYER
INTENT 2
Image quality
priority setting
0 - 2 1