Specifications

MX-3610N SIMULATION 5 – 119
50-24
Purpose
(This simulation is normally not used in the
market.)
Function (Purpose)
Used to display the detail data of SIM 44-2,
50-20, 21 and 22.
Section
Operation/Procedure
This simulation is mainly used by the technical division, and is not
necessary for the market.
50-27
Purpose
Adjustment
Function (Purpose)
Used to perform the image loss adjustment
of scanned images in the FAX or image
send mode.
Section
Operation/Procedure
1) Select a target adjustment mode with [FAX] or [SCANNER]
key.
2) Select an adjustment target item with scroll key on the touch
panel.
3) Enter the set value with 10-key.
4) Press [OK] key. (The set value is saved.)
[RSPF]
A-I: When the adjustment value is increased, the image loss is increased.
1step = 0.1mm
Item/Display Content Setting range Default value
FAX send A Image loss
amount setting OC
LEAD_EDGE (OC) OC lead edge image loss amount setting 0 - 100 30 (3mm)
B FRONT_REAR (OC) OC side image loss amount setting 0 - 100 20 (2mm)
C TRAIL_EDGE (OC) OC rear edge image loss amount setting 0 - 100 20 (2mm)
D Image loss
amount setting
SPF SIDE1
LEAD_EDGE (SPF_SIDE1) Front surface lead edge image loss
amount setting
0 - 100 20 (2mm)
E FRONT_REAR (SPF_SIDE1) Front surface side image loss amount
setting
0 - 100 20 (2mm)
F TRAIL_EDGE (SPF_SIDE1) Front surface rear edge image loss
amount setting
0 - 100 30 (3mm)
G Image loss
amount setting
SPF SIDE2
LEAD_EDGE (SPF_SIDE2) Back surface lead edge image loss
amount setting
0 - 100 20 (2mm)
H FRONT_REAR (SPF_SIDE2) Back surface side image loss amount
setting
0 - 100 20 (2mm)
I TRAIL_EDGE (SPF_SIDE2) Back surface rear edge image loss
amount setting
0 - 100 30 (3mm)
When image send
mode (Except for
FAX and copy)
A Image loss
amount setting OC
LEAD_EDGE (OC) OC lead edge image loss amount setting 0 - 100 0 (0mm)
B FRONT_REAR(OC) OC side image loss amount setting 0 - 100 0 (0mm)
C TRAIL_EDGE(OC) OC rear edge image loss amount setting 0 - 100 0 (0mm)
D Image loss
amount setting
SPF SIDE1
LEAD_EDGE (SPF_SIDE1) Front surface lead edge image loss
amount setting
0 - 100 0 (0mm)
E FRONT_REAR (SPF_SIDE1) Front surface side image loss amount
setting
0 - 100 0 (0mm)
F TRAIL_EDGE(SPF_SIDE1) Front surface rear edge image loss
amount setting
0 - 100 0 (0mm)
G Image loss
amount setting
SPF SIDE2
LEAD_EDGE (SPF_SIDE2) Back surface lead edge image loss
amount setting
0 - 100 0 (0mm)
H FRONT_REAR (SPF_SIDE2) Back surface side image loss amount
setting
0 - 100 0 (0mm)
I TRAIL_EDGE(SPF_SIDE2) Back surface rear edge image loss
amount setting
0 - 100 0 (0mm)