Specifications

MX-3610N SIMULATION 5 – 120
50-28
Purpose
Adjustment
Function (Purpose)
Used to automatically adjust the image
loss, void area, image off-center, and image
magnification ratio.
Section
Operation/Procedure
The following adjustment items can be executed automatically with
SIM50-28.
* ADJ16 Print image position, image magnification ratio, void area,
off-center adjustments (Manual adjustments)
* ADJ 17 Scan image magnification ratio adjustment (Manual
adjustment)
* ADJ 18 Scan image off-center adjustment (Manual adjustment)
* ADJ 19 Used to adjust the copy image position and the image
loss (Manual adjustments)
1) Select an adjustment item with the menu button.
2) Press [EXECUTE] key, and the adjustment pattern is printed.
3) Set the adjustment pattern on the document table.
4) Press [EXECUTE] key, and the adjustment pattern is scanned.
5) Press [OK] key.
51
51-1
Purpose
Adjustment/Setup
Function (Purpose)
Used to adjust the ON/OFF timing of the
secondary transport voltage.
Section
Operation/Procedure
1) Select an adjustment target item with scroll key on the touch
panel.
2) Enter the set value with 10-key.
3) Press [OK] key. (The set value is saved.)
When the adjustment value is decreased, the transfer ON/OFF tim-
ing for the paper is advanced. When the adjustment value is
increased, the timing is delayed.
When the adjustment value is changed by 1, the timing is changed
by about 10ms. The setting range is -490 - +490ms.
51-2
Purpose
Adjustment/Setup
Function (Purpose)
Used to adjust the contact pressure (deflec-
tion amount) on paper by the main unit and
the RSPF registration roller. (This adjust-
ment is performed when there is a consid-
erable variation in the print image position
on the paper or when paper jams frequently
occur.)
Section
Operation/Procedure
1) (When RSPF model)
Select a target adjustment mode with [SIDE1] or [SIDE2] or
[ENGINE] keys.
2) Select a target item to be adjusted with scroll keys.
3) Enter the set value with 10-key.
4) Press [OK] key. (The set value is saved.)
Item/Display Content Section
OC ADJ MFT Document lead
edge
Document off-
center
Sub scanning
magnification ratio
Image loss off-
center sub scanning
direction image
magnification ratio
adjustment
(Document table
mode)
Scanner
CS1
CS2
ADU
CS3
CS4
LCC
Item/Display Content Section
SPF
ADJ
(RSPF)
ALL SIDE1
(Front
surface)
MFT Document
lead edge
Document
off-center
Sub
scanning
magnifica-
tion ratio
Document
lead edge
Document
off-center
Sub
scanning
magnifica-
tion ratio
Image loss
off-center
sub
scanning
direction
image
magnifica-
tion ratio
adjustment
(RSPF
mode)
Scanner
SIDE2
(Back
surface)
CS1
CS2
ADU
CS3
CS4
LCC
Item/Display Content Section
SETUP/
PRINT
ADJ
ALL LEAD MFT Print off
center
Print lead
edge
Print lead
edge
adjustment,
image off-
center
(each paper
feed tray,
duplex
mode)
adjustment
Engine
CS1
CS2
OFFSET ADU
CS3
CS4
LCC
Item/Display Content Section
BK-MAG
ADJ
MFT BK main scanning
magnification ratio
Main scanning
direction image
magnification ratio
adjustment
Engine
CS1
CS2
ADU
CS3
CS4
LCC
RESULT Adjustment result display
DATA Adjustment operation data display
Item/Display Content
Default
value
A TC2 ON TIMING Secondary transfer voltage ON
timing setting
50
B TC2 OFF TIMING Secondary transfer voltage OFF
timing setting
60