Owner's Manual

TOP

Printing

Index

Introduction

Scanning

Using the Sharp

Control Panel

Table of Contents

Working with

Imaging Files

124

In the field on the left that shows Speed Dial numbers and

Rapid Keys, click on the Rapid Key (one-touch dial key) or

Speed Dial number (two-digit abbreviated dialing number)

that you wish to program.

(To expand a list, click on the “+”.)

(For more information on Rapid Key and Speed Dial numbers, see

Chapter 3 of the Operation Manual.)

In the Key Mode field, select Normal Dial for a fax number,

E-mail for an E-mail destination, or Chain Dial for an area

or access code.

(Note: Programming an area code or access code as a Chain

Dial number allows you to automatically dial that area/access

code by pressing a Rapid Key or entering a Speed Dial

number. You can then dial the rest of the fax or voice number

by any of the dialing methods explained in Chapter 3 of the

Operation Manual.)

Enter the name of the destination in the Name field.

If you selected Normal Dial or Chain Dial for the Key Mode,

enter the fax number or area/access code in the Number

box. When finished, go to Step 6.

05.fm Page 124 Monday, February 19, 2001 11:36 AM